Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4050AIM3X-4.1

Texas Instruments · Voltage References · SOT-23

LM4050AIM3X-4.1 from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 Cathode bidirectional Carries the shunt current and the input voltage; the device is rated for a 20 mA maximum reverse current and a 15 mA maximum operating current, with the minimum operating current of 60 µA to 100 µA depending on the voltage option.
2 Anode power_in Common pin, normally connected to ground; the datasheet rates the forward current at 10 mA maximum.
3 NC unconnected No internal connection; the datasheet footnote says the pin must be left floating or connected to pin 2.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse breakdown voltage tolerance (A grade, 25 C) VR -4.1 4.1 mV IR = 100 μA 7
Reverse breakdown voltage tolerance (A grade, industrial temperature range) VR -18 18 mV TA = TJ = TMIN to TMAX 7
Minimum operating current IRMIN 52 68 μA TA = TJ = 25°C 7
Minimum operating current (industrial temperature range) IRMIN 73 μA TA = TJ = TMIN to TMAX 7
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -30 30 ppm/°C IR = 10 mA 7
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -20 20 ppm/°C IR = 1 mA 7
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -50 50 ppm/°C IR = 100 μA, TA = TJ = TMIN to TMAX 7
Reverse breakdown voltage change with operating current ΔVR/ΔIR 0.2 0.9 mV IRMIN ≤ IR ≤ 1 mA, TA = TJ = 25°C 7
Reverse breakdown voltage change with operating current ΔVR/ΔIR 1.2 mV IRMIN ≤ IR ≤ 1 mA, TA = TJ = TMIN to TMAX 7
Reverse breakdown voltage change with operating current ΔVR/ΔIR 2 7 mV 1 mA ≤ IR ≤ 15 mA, TA = TJ = 25°C 7
Reverse breakdown voltage change with operating current ΔVR/ΔIR 10 mV 1 mA ≤ IR ≤ 15 mA, TA = TJ = TMIN to TMAX 7
Reverse breakdown voltage (nominal, 4.1-V option) VR 4.096 V IR = 100 μA 7
Reverse dynamic impedance ZR 0.5 Ω IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 7
Wideband noise eN 93 μVrms IR = 100 μA, 10 Hz ≤ f ≤ 10 kHz 7
Reverse breakdown voltage long term stability ΔVR 120 ppm t = 1000 hrs, T = 25°C ±0.1°C, IR = 100 μA 7
Thermal hysteresis VHYST 1.148 mV ΔT = −40°C to 125°C 7
Ambient temperature range (industrial) -40 85 °C 4
Junction temperature range (industrial) -40 85 °C 4
Reverse current 20 mA 3
Forward current 10 mA 3
Power dissipation 280 mW TA = 25°C 3
Maximum junction temperature 150 °C 3
Storage temperature -65 150 °C 3
Junction-to-ambient thermal resistance (DBZ SOT-23) RθJA 287 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 106.6 °C/W 4
Junction-to-board thermal resistance RθJB 57.7 °C/W 4
Junction-to-top characterization parameter ψJT 5.5 °C/W 4
Junction-to-board characterization parameter ψJB 56.4 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4050AIM3X-4.1
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4050aim3x-4-1-etched.step / lm4050aim3x-4-1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4050aim3x-4-1.step / lm4050aim3x-4-1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 7840e9c32f814e44, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF