3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM49450SQX
Texas Instruments · Audio Amplifiers · WQFN-32(5x5)
LM49450SQX from Texas Instruments, in a WQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1P | passive | Charge pump flying capacitor positive terminal, connected to the C1 flying capacitor of the headphone charge pump. |
| 2 | CPGND | power_in | Charge pump ground. |
| 3 | SDA | bidirectional | I2C serial data input (open-collector bus line, operated up to 400kHz). |
| 4 | DGND | power_in | Digital ground. |
| 5 | I2S_WS | bidirectional | I2S word select; an input in slave mode and driven by the device when I2S_WS_M is set to master mode. |
| 6 | I2S_SDI | input | I2S serial data input. |
| 7 | I2S_CLK | bidirectional | I2S clock; an input in slave mode and driven by the device when I2S_CLK_M is set to master mode. |
| 8 | MCLK | input | Master clock input from which the DAC, I2S and charge pump clocks are derived (MCLK period minimum 32ns). |
| 9 | SCL | input | I2C clock input; the clock line is uni-directional and driven by the master. |
| 10 | DVDD | power_in | Digital core power supply, operating range 2.7V to 4.5V. |
| 11 | IOVDD | power_in | Digital interface power supply for I2S and I2C, operating range 1.8V to 4.5V. |
| 12 | GND | power_in | Analog ground. |
| 13 | REF | passive | DAC reference bypass; external reference voltage must not exceed VDD when the internal reference is disabled. |
| 14 | INR | input | Right channel analog input. |
| 15 | INL | input | Left channel analog input; input coupling capacitors are required to block DC. |
| 16 | VDD | power_in | Analog power supply for the input and gain stages and the speaker gain stage, operating range 2.7V to 5.5V. |
| 17 | BYPASS | passive | Mid-rail (VDD/2) common-mode bias bypass; a 2.2µF ceramic capacitor placed close to the device is recommended. |
| 18 | LSVDD | power_in | Speaker power supply for the Class D output stage, operating range 2.7V to 5.5V. |
| 19 | LLS+ | output | Left channel non-inverting Class D speaker output. |
| 20 | LLS- | output | Left channel inverting Class D speaker output. |
| 21 | LSGND | power_in | Speaker ground. |
| 22 | RLS- | output | Right channel inverting Class D speaker output. |
| 23 | RLS+ | output | Right channel non-inverting Class D speaker output. |
| 24 | LSVDD | power_in | Speaker power supply for the Class D output stage, operating range 2.7V to 5.5V. |
| 25 | HPGND | power_in | Headphone amplifier ground. |
| 26 | HPS | input | Headphone sense input; high (above 1V) indicates a headphone is present and enables the headphone amplifiers while disabling the speaker amplifiers. |
| 27 | HPR | output | Right channel headphone amplifier output, ground referenced. |
| 28 | HPVDD | power_in | Headphone amplifier power supply, operating range 1.8V to 2.7V. |
| 29 | HPL | output | Left channel headphone amplifier output, ground referenced. |
| 30 | HPVSS | power_out | Charge pump output and negative supply for the headphone amplifiers. |
| 31 | C1N | passive | Charge pump flying capacitor negative terminal, connected to the C1 flying capacitor. |
| 32 | CPVDD | power_in | Charge pump power supply, operating range 1.8V to 2.7V. |
| 33 | GND | power_in | Exposed die-attach thermal pad, which the datasheet says should be connected to GND with a large pad and via to a large GND plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-32(5x5) |
| Category | Amplifiers/Comparators |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 6 | V | 4 | ||||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Input Voltage | -0.3 | V | 4 | ||||
| ESD Susceptibility | 2000 | V | Human body model, JESD22-A114C | 4 | |||
| ESD Susceptibility | 200 | V | Machine model, JESD22-A115-A | 4 | |||
| Junction Temperature | TJMAX | 150 | °C | 4 | |||
| Temperature Range | TA | -40 | 85 | °C | TMIN ≤ TA ≤ TMAX | 4 | |
| Supply Voltage (VDD, LSVDD) | VDD, LSVDD | 2.7 | 5.5 | V | 4 | ||
| Headphone Supply Voltage (CPVDD, HPVDD) | CPVDD, HPVDD | 1.8 | 2.7 | V | 4 | ||
| Digital Core Supply Voltage | DVDD | 2.7 | 4.5 | V | 4 | ||
| Digital IO Supply Voltage | IOVDD | 1.8 | 4.5 | V | 4 | ||
| Digital Core Supply Current | DIDD | 9 | 11.2 | mA | DVDD = 2.7V, fS = 48kHz, fMCLK = 12.28MHz | 5 | |
| Shutdown Supply Current (Digital) | ISD | 0.03 | 1 | μA | 5 | ||
| Shutdown Supply Current (Analog) | ISD | 0.02 | 1 | μA | 5 | ||
| Analog Supply Current (speaker, DAC active) | IDDLS | 9.8 | 13 | mA | fS = 48kHz, DAC Active, No Load | 5 | |
| Analog Supply Current (speaker, line inputs) | IDDLS | 7 | 10 | mA | Line Inputs Active, No Load | 5 | |
| Output Offset Voltage (speaker, DAC active) | VOS | 8 | 45 | mV | DAC Active | 5 | |
| Output Offset Voltage (speaker, line inputs) | VOS | 8 | mV | Line Inputs Active | 5 | ||
| Output Power (8Ω, THD+N 1%) | POUT | 525 | 625 | mW | RL = 8Ω, f = 1kHz, THD+N = 1% | 5 | |
| PSRR (speaker, DAC active, internal reference) | PSRR | 45 | 59 | dB | VRIPPLE = 200mVP-P, f = 1kHz, DAC Active, Internal Reference | 5 | |
| Digitally Controlled Gain Level (max gain, speaker) | AV | 22.5 | 23.6 | 24.1 | dB | Maximum Gain Setting, Line Inputs Active | 5 |
| Digitally Controlled Gain Level (min gain, speaker) | AV | -49 | -48 | -46 | dB | Minimum Gain Setting, Line Inputs Active | 5 |
| Headphone Analog Supply Current (DAC active) | IDDHP | 7.2 | 8.25 | mA | fS = 48kHz, DAC active | 6 | |
| Headphone Analog Supply Current (line inputs) | IDDHP | 5.3 | 6.5 | mA | Line Inputs Active | 6 | |
| Headphone Output Offset Voltage (DAC active) | VOS | 7 | 30 | mV | DAC active, AV = -6dB | 6 | |
| Headphone Output Offset Voltage (line inputs) | VOS | 5 | mV | Line Inputs Active, AV = -6dB | 6 | ||
| Output Power (32Ω, single channel) | PO | 42 | 49 | mW | RL = 32Ω, f = 1kHz, THD+N = 1%, Single Channel | 6 | |
| Output Power (32Ω, two channels in phase) | PO | 27 | 36 | mW | RL = 32Ω, f = 1kHz, THD+N = 1%, Two Channels in Phase | 6 | |
| PSRR (headphone, DAC active, internal reference) | PSRR | 56 | 71.2 | dB | VRIPPLE = 200mVP-P, f = 1kHz, DAC Active, Internal Reference | 6 | |
| Digitally Controlled Gain Level (max gain, headphone) | AV | 17 | 17.8 | 18.5 | dB | Maximum Gain Setting, Line Inputs Active | 6 |
| Digitally Controlled Gain Level (min gain, headphone) | AV | -56 | -53.8 | -52 | dB | Minimum Gain Setting, Line Inputs Active | 6 |
| Full-Scale Headphone Amplifier Output Voltage | VOUT_FS | 850 | 942 | mVRMS | RL = No Load | 7 | |
| Digital Input High Voltage | VIH | 2.8 | V | 7 | |||
| Digital Input Low Voltage | VIL | 0.8 | V | 7 | |||
| Digital Output High Voltage | VOH | 2 | V | 7 | |||
| Digital Output Low Voltage | VOL | 1 | V | 7 | |||
| Analog Supply Current (speaker, DAC active) at 5.0V | IDDLS | 14 | 18 | mA | fS = 48kHz, DAC Active | 7 | |
| Analog Supply Current (speaker, line inputs) at 5.0V | IDDLS | 10.4 | 16 | mA | Line Inputs Active | 7 | |
| Output Offset Voltage (speaker, DAC) at 5.0V | VOS | 15 | 50 | mV | DAC | 7 | |
| Output Offset Voltage (speaker, line inputs) at 5.0V | VOS | 12 | 48 | mV | AV = 0dB, Line Inputs Active | 7 | |
| Output Power (8Ω, THD+N 1%) at 5.0V | POUT | 1.25 | mW | RL = 8Ω, f = 1kHz, THD+N = 1% | 7 | ||
| Digitally Controlled Gain Level (max gain, speaker) at 5.0V | AV | 22.5 | 24.2 | 24.2 | dB | Maximum Gain Setting, Line Inputs Active | 8 |
| Digitally Controlled Gain Level (min gain, speaker) at 5.0V | AV | -49 | -48 | -46 | dB | Minimum Gain Setting, Line Inputs Active | 8 |
| MCLK Pulse Width Low | tMCLKL | 16 | ns | 8 | |||
| MCLK Pulse Width High | tMCLKH | 16 | ns | 8 | |||
| MCLK Period | tMCLKY | 32 | ns | 8 | |||
| BCLK Rise Time | tBCLKR | 3 | ns | 8 | |||
| BCLK Fall Time | tBCLKCF | 3 | ns | 8 | |||
| LRC Propagation Delay | tDL | 10 | ns | from BCLK falling edge | 8 | ||
| DATA Setup Time to BCLK Rising Edge | tDST | 10 | ns | 8 | |||
| DATA Hold Time from BCLK Rising Edge | tDHT | 10 | ns | 9 | |||
| SCLK Frequency | 400 | kHz | 9 | ||||
| Data Hold Time (output) | 300 | ns | 9 | ||||
| Data Hold Time (input) | 0 | 900 | ns | 9 | |||
| Data Setup Time | 100 | ns | 9 | ||||
| Rise Time of SDA and SCL | 300 | ns | 9 | ||||
| Fall Time of SDA and SCL | 300 | ns | 9 | ||||
| Bus Capacitance | CB | 10 | 200 | pF | 9 | ||
| Thermal Resistance, Junction-to-Case | θJC | 2.4 | °C/W | 4 | |||
| Thermal Resistance, Junction-to-Ambient | θJA | 28.4 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM49450SQX - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: WQFN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.75 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm49450sqx-etched.step/lm49450sqx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm49450sqx.step/lm49450sqx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
be2deddb634a1b75, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).