3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownGS7253-ASO-R
GSTEK Green Solution Technology · DC-DC Controllers · SOIC-8-EP
GS7253-ASO-R from GSTEK Green Solution Technology, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap supply for the high-side gate driver. An external capacitor from PHASE to BOOT, together with the internal diode and VCC, generates the bootstrap voltage for the UGATE driver. Absolute max V_BOOT-GND = 36 V; V_BOOT-PHASE = 18 V. |
| 2 | UGATE | output | High-side gate driver output for the external N-channel MOSFET. Pull-up ~3.5 Ω, pull-down ~1.9 Ω at BOOT-PHASE=12V. Voltage range: -0.3V to V_BOOT+0.3V. |
| 3 | OCSET | input | Over-current setting pin. Connecting a resistor (R_OCSET) between OCSET and GND sets the over-current trip point. Sources ~20 uA (18-22 uA); OCP threshold VPHASE1 = -250 mV at V_OCSET=1.0V. Absolute max -0.3 to 6 V. |
| 4 | LGATE | output | Low-side gate driver output for the external N-channel MOSFET. Pull-up ~3.8 Ω, pull-down ~1.8 Ω at V_CC=12V. Voltage range: -0.3V to V_CC+0.3V. |
| 5 | VCC | power_in | Power supply input for control circuitry. Connect a well-decoupled 5V/12V supply; place a decoupling capacitor near the IC. Recommended 4.5-13.2 V; POR threshold ~4.2 V; absolute max 18 V. |
| 6 | FB | input | Feedback input to the converter. Connect a resistor divider from V_OUT to set the output voltage; internal reference V_FB = 0.6 V (±1%). UVP trip at 0.3 V (0.5×V_REF), OVP at 0.75 V (1.25×V_REF). |
| 7 | COMP/EN | output | Error amplifier output and enable input. Used with FB for loop compensation of the voltage-mode converter. Pulling this pin below ~0.3 V (enable threshold 0.3-0.35 V) disables the controller. |
| 8 | PHASE | input | Switch node. Connect to the source of the upper MOSFET and drain of the lower MOSFET. Serves as sink for the UGATE driver and monitors V_DS across the lower MOSFET for over-current protection. Rated -0.3 to 18 V (>200 ns) / -2 to 28 V (<200 ns). |
| 9 | GND | power_in | Signal and power ground (exposed thermal pad). Connect to system ground. Also provides thermal dissipation path; θ_JA = 75 °C/W. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GSTEK Green Solution Technology |
| Package | SOIC-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
GS7253-ASO-R
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | VIN | 3 | 13.2 | V | 5 | ||
| VCC to GND | VCC | 4.5 | 13.2 | V | 5 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 5 | ||
| Ambient Temperature | TA | -40 | 85 | °C | 5 | ||
| VCC to GND | VSUPPLY | -0.3 | 18 | V | 4 | ||
| BOOT Voltage | VBOOT-GND | -0.3 | 36 | V | 4 | ||
| BOOT to PHASE Voltage | VBOOT-PHASE | -0.3 | 18 | V | 4 | ||
| UGATE to PHASE Voltage | VGU | -0.3 | V | 4 | |||
| LGATE to GND Voltage | VGL | -0.3 | V | 4 | |||
| PHASE to GND | VPHASE | -0.3 | 18 | V | >200ns | 4 | |
| PHASE to GND | VPHASE | -2 | 28 | V | <200ns | 4 | |
| FB, COMP, OCSET to GND | -0.3 | 6 | V | 4 | |||
| Package Power Dissipation | PD_PSOP-8 | 1333 | mW | TA≦25°C | 4 | ||
| Junction Temperature | TJ | -45 | 150 | °C | 4 | ||
| Storage Temperature | TSTG | -55 | 150 | °C | 4 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | °C | 10S | 4 | ||
| ESD (Machine Mode) | VESD_MM | 200 | V | Machine Mode | 4 | ||
| Supply Voltage | VCC | 4.5 | 13.2 | V | 5 | ||
| Supply Current | ICC | 3.8 | mA | UGATE,LGATE Open; VCC=12V,Switching | 5 | ||
| Quiescent Supply Current | ICC-Q | 2 | mA | VFB=0.7V,NO Switching | 5 | ||
| Power Input Voltage | VIN | 3 | 13.2 | V | 5 | ||
| POR Threshold | 4 | 4.2 | 4.4 | V | 5 | ||
| Free Running Frequency | fOSC | 270 | 300 | 330 | KHz | GS7253-A | 5 |
| Nominal Feedback Voltage | VFB | 0.594 | 0.6 | 0.606 | V | Internal Reference Mode | 5 |
| Dead Time TDL | TDL | 30 | 90 | ns | VCC=12;VPHASE<1.2V to VLGATE>1.2V | 6 | |
| Dead Time TDH | TDH | 30 | 90 | ns | VCC=12;VLGATE<1.2V to (VUGATE-VPHASE)>1.2V | 6 | |
| Under Voltage Protection | VFB-UVP | 0.27 | 0.3 | 0.33 | V | VREF=0.6V | 6 |
| Over Voltage Protection | VFB-OVP | 0.72 | 0.75 | 0.78 | V | VREF=0.6V | 6 |
| OCSET Current Source | IOC_SET | 18 | 20 | 22 | uA | VOCSET=1.0 | 6 |
| Enable Threshold | VCOMP/EN | 0.3 | 0.35 | V | GS7253-A | 6 | |
| Internal Boot Diode Forward Voltage | VF | 0.2 | 0.4 | 0.6 | V | VCC to BOOT, IF=10mA | 6 |
| Thermal Resistance Junction to Ambient | θJA_PSOP-8 | 75 | °C/W | Note 3: natural convection at TA=25°C | 5 | ||
| POR Hysteresis | 0.5 | V | 5 | ||||
| Ramp Amplitude | ΔVOSC | 1.8 | VP_P | Guaranteed by Design | 5 | ||
| Open Loop DC Gain | A0 | 88 | dB | Guaranteed by Design | 5 | ||
| Gain-Bandwidth Product | GBW | 10 | MHz | Guaranteed by Design | 5 | ||
| Slew Rate | SR | 10 | V/us | Guaranteed by Design | 5 | ||
| UGATE Driver Pull Up | RU_UP | 3.5 | ohms | BOOT-PHASE=12V, UGATE=High, IUGATE=-100mA | 6 | ||
| UGATE Driver Pull Down | RU_DN | 1.9 | ohms | BOOT-PHASE=12V, UGATE=Low, IUGATE =100mA | 6 | ||
| LGATE Driver Pull Up | RL_UP | 3.8 | ohms | VCC=12V, LGATE= High, ILGATE=-100mA | 6 | ||
| LGATE Driver Pull Down | RL_SINK | 1.8 | ohms | VCC=12V, LGATE=Low, ILGATE =100mA | 6 | ||
| Over Voltage Protection Delay | VFB-OVP-DL | 20 | us | VREF=0.6V | 6 | ||
| OCP Threshold | VPHASE1 | -250 | mV | VOCSET=1.0,GS7253-A | 6 | ||
| Soft-Start Interval | TSS | 2 | mS | Internal Reference Mode | 6 | ||
| Thermal Shutdown Temperature | TTSDN | 151 | °C | 6 | |||
| Thermal Shutdown Hysteresis | THYS_TSDN | 15 | °C | 6 |
CAD (KiCad official)
- Symbol:
GS7253-ASO-R - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
gs7253-aso-r-etched.step/gs7253-aso-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gs7253-aso-r.step/gs7253-aso-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GSTEK Green Solution Technology datasheet (16 pp, sha256
2d86855cc8b33a11, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).