component
NF-01-S
Public Made by Adomby adom
Ai-Thinker RF Modules, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNF-01-S
Ai-Thinker · RF Modules · DIP-8
NF-01-S from Ai-Thinker, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply, must be between 1.9 V and 3.6V (typical 3.3 V). |
| 2 | GND | power_in | Ground, connected to the power supply reference ground. |
| 3 | CSN | input | Chip select input of the module, used to start an SPI communication. |
| 4 | CE | input | Chip enable/control input of the module. |
| 5 | MOSI | input | SPI data input pin of the module. |
| 6 | SCK | input | SPI clock input of the module (SPI up to 10 MHz). |
| 7 | IRQ | output | Interrupt signal output of the module, active low. |
| 8 | MISO | output | SPI data output pin of the module. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Ai-Thinker |
| Package | DIP-8 |
| Category | IoT/Communication Modules |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.9 | 3.3 | 3.6 | V | typical 3.3V | 2 |
| Operating temperature | -20 | 85 | °C | 2 | |||
| Storage environment temperature | -20 | 90 | °C | <90%RH | 2 | ||
| Maximum transmit power | 6 | 7 | 8 | dBm | 7±1 dBm | 2 | |
| Receive sensitivity | -96 | dBm | 250kbps | 2 | |||
| Transmit current | 25 | mA | 7dBm | 2 | |||
| Receive current | 15 | mA | 2Mbps | 2 | |||
| Shutdown current | 1 | uA | Shutdown mode | 2 | |||
| Frequency range | 2400 | 2525 | MHz | 1MHz step | 2 |
CAD (KiCad official)
- Symbol:
NF-01-S - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
nf-01-s-etched.step/nf-01-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nf-01-s.step/nf-01-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Ai-Thinker datasheet (2 pp, sha256
702f5e921b14bf31, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).