component
SS6285L-SO-TP
Public Made by Adomby adom
LEADPOWER Motor Driver ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSS6285L-SO-TP
LEADPOWER · Motor Driver ICs · SOP-8
SS6285L-SO-TP from LEADPOWER, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BI | input | Reverse-direction logic input that, together with FI, selects forward, reverse, brake or stop mode; VINH is at least 2.2 V, VINL at most 0.7 V, input range is -0.3 V to 18 V, and it must stay low or high-impedance until VCC has powered up and a 3 ms delay has elapsed. |
| 2 | FI | input | Forward-direction logic input that, together with BI, selects forward, reverse, brake or stop mode; VINH is at least 2.2 V, VINL at most 0.7 V, input range is -0.3 V to 18 V, and it must stay low or high-impedance until VCC has powered up and a 3 ms delay has elapsed. |
| 3 | GND | power_in | Ground terminal to which all datasheet voltage values are referenced. |
| 4 | VCC | power_in | Motor and logic supply with an operating range of 3 V to 18 V and an absolute maximum of 20 V, where input capacitors should be placed as close to this pin as possible. |
| 5 | FO | output | Forward-side H-bridge output to the motor, high in forward mode and low in reverse mode, rated for a continuous output current of 5.0 A in the recommended conditions (absolute maximum 9.0 A). |
| 6 | FO | output | Forward-side H-bridge output to the motor (second FO pin, same net as pin 5), rated for a continuous output current of 5.0 A in the recommended conditions (absolute maximum 9.0 A). |
| 7 | BO | output | Reverse-side H-bridge output to the motor, high in reverse mode and low in forward mode, rated for a continuous output current of 5.0 A in the recommended conditions (absolute maximum 9.0 A). |
| 8 | BO | output | Reverse-side H-bridge output to the motor (second BO pin, same net as pin 7), rated for a continuous output current of 5.0 A in the recommended conditions (absolute maximum 9.0 A). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LEADPOWER |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 20 | V | 2 | |||
| Output continuous current | Iout | 9 | A | 2 | |||
| Operating temperature | Top | -25 | 85 | ℃ | 2 | ||
| Storage temperature | Tstg | -55 | 150 | ℃ | 2 | ||
| Operating voltage range | VCC | 3 | 18 | V | 3 | ||
| Input signal voltage | VINH | -0.3 | 18 | V | 3 | ||
| Output continuous current | VOUT_X | 0 | 5 | A | Based on 40mm2 single-sided PCB, FR4 PCB (1 oz.) | 3 | |
| Logic input frequency | FIN_X | 30 | KHz | 3 | |||
| Operating voltage | Vopr | 3 | 18 | V | 3 | ||
| Standby current | ICCST | 1 | uA | VCC=12V,FI=BI=0V,noload | 3 | ||
| UVLO threshold (VCC rising) | UVLO | 1.9 | 2.2 | 2.8 | V | VCC rising | 3 |
| Input high level | VINH | 2.2 | V | 3 | |||
| Input low level | VINL | 0.7 | V | 3 | |||
| Input high-level current | IINH | 110 | 200 | uA | VCC = 12V,VIN = 5V | 3 | |
| Input low-level current | IINL | 1 | uA | VCC = 12V,VIN= 0V | 3 | ||
| Quiescent current | ICC | 1 | mA | VCC=12V,FI=BI=5V or FI=5V & BI=0V or FI=0V & BI=5V, no load | 3 | ||
| PWM current | ICCPWM1 | 2.5 | mA | VCC=12V, FI=5V, BI=50KHz, no load | 3 | ||
| H-bridge on-resistance | Rds(on) | 58 | mΩ | ILOAD=1A, HS+LS | 3 | ||
| H-bridge on-resistance | Rds(on) | 71 | mΩ | ILOAD=3A, HS+LS | 3 | ||
| Overtemperature protection threshold | TOTP | 160 | ℃ | 3 | |||
| Overtemperature recovery threshold | TSDR | 130 | ℃ | 3 | |||
| Overcurrent protection current | IOCP | 12 | A | 3 |
CAD (KiCad official)
- Symbol:
SS6285L-SO-TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ss6285l-so-tp-etched.step/ss6285l-so-tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ss6285l-so-tp.step/ss6285l-so-tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LEADPOWER datasheet (8 pp, sha256
4b0108988646b70e, retrieved 2026-10-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).