Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS92515HVQDGQTQ1

Texas Instruments · LED Drivers · MSOP-10-EP

TPS92515HVQDGQTQ1 from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COFF input Input for OFF-time control; connect resistor from VLED and capacitor to GND to set OFF-time threshold to 1.0 V nominal.
2 VCC power_out 5-V regulated output from internal regulator; nominal 5.0 V, range 4.8 to 5.2 V with external load up to 500 µA; use 1 µF to 10 µF decoupling capacitor.
3 GND power_in Ground reference; connect to circuit ground plane and thermal pad.
4 BOOT input Gate drive supply input; connect ceramic capacitor between BOOT and SW, and diode from VCC to BOOT; UVLO threshold 2.0 to 3.5 V with 125 mV hysteresis; maximum 70.5 V to GND.
5 SW output Internal N-channel FET source output; connect to output inductor; integrated FET RDS(on) 290 mΩ typical at 25°C, rising to 600 mΩ at 150°C; maximum 65 V to GND.
6 DRN input Internal N-channel FET drain input; connect to CSN node for peak current detection; maximum 65 V to GND for TPS92515HV.
7 CSN input Current sense negative input; connect current sense resistor from VIN to CSN for high-side peak current monitoring; threshold 224 to 251 mV at VIADJ = VCC, or 211.5 to 223.5 mV at VIADJ = 2.2 V.
8 VIN power_in Input supply voltage and current sense positive; operating range 5.5 to 65 V for TPS92515HV; UVLO threshold 4.65 to 5.15 V falling with 150 to 225 mV hysteresis; maximum 65 V to GND.
9 PWM input PWM dimming input and device enable; threshold 0.95 to 1.05 V rising with 50 to 150 mV hysteresis; includes 100 µA pulldown when low; connect to VCC if not used.
10 IADJ input Analog current adjust input; sets peak current threshold via internal 10:1 divider with 2.4 V clamp; practical range 0.5 to 5.5 V with best accuracy at 2.2 V or lower.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category LED Drivers
Pins 11

CAD (KiCad official)

  • Symbol: TPS92515HVQDGQTQ1
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: tps92515hvqdgqtq1-etched.step / tps92515hvqdgqtq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92515hvqdgqtq1.step / tps92515hvqdgqtq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 b6e415ec88013b0b, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF