Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS79730QDCKRQ1

Texas Instruments · Linear Voltage Regulators (LDO) · SC-70-5

TPS79730QDCKRQ1 from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PG output Open-drain, active-high power-good output that goes high impedance when VO exceeds about 90% of the regulated voltage and low impedance below about 90%, and requires a pullup resistor.
2 GND power_in Ground terminal; all device voltages are specified with respect to network ground.
3 NC unconnected No connection; the pin has no function on this device.
4 IN power_in Power supply input; the minimum input is 1.8 V or VO(typ) + 1 V, whichever is greater (4 V for the 3-V TPS79730), and the maximum is 5.5 V.
5 OUT power_out Provides the regulated output voltage, supplying 0 to 10 mA continuous with internal current limiting to approximately 190 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (IO = 3 mA) VI 1.8 5.5 V IO = 3 mA 3
Input voltage (IO = 10 mA) VI 2 5.5 V IO = 10 mA 3
Continuous output current IO 0 10 mA See Note 3 3
Operating junction temperature TJ -40 125 °C 3
Output voltage (10 µA to 10 mA load), TPS79730 VO 2.88 3.12 V TJ = −40°C to 125°C, 4 V < VI < 5.5 V (see Note 4) 3
Quiescent current (GND current) 5 µA TJ = −40°C to 125°C, IO = 10 mA (see Note 4) 3
Output voltage line regulation (ΔVO/VO) 0.8 %/V VO + 1 V < VI ≤ 5.5 V, TJ = −40°C to 125°C (see Note 4) 3
Output current limit 190 300 mA VO = 0 V (see Note 4) 3
Dropout voltage (TPS79730) 400 mV IO = 10 mA, TJ = −40°C to 125°C (see Note 5) 3
PG trip threshold voltage 82 90 96 %VO VO decreasing 3
PG output low voltage 0.14 0.4 V VI = 1.4 V, IO(PG) = 100 µA 3
PG leakage current 0.1 nA V(PG) = 5 V 3
Input voltage range VI -0.3 6 V Referenced to network ground (Note 1) 2
Maximum dc output voltage 4.9 V 2
ESD rating, HBM 3 kV HBM 2
ESD rating, CDM 1 kV CDM 2
Operating junction temperature range, TJ TJ -40 125 °C 2
Operating ambient temperature range, TA TA -40 125 °C 2
Storage temperature range Tstg -65 150 °C 2
Junction-to-ambient thermal resistance (Low K board) RθJA 396.24 °C/W Low K (JEDEC 1s) board 2
Junction-to-ambient thermal resistance (High K board) RθJA 314.74 °C/W High K (JEDEC 2s2p) board 2
Junction-to-case thermal resistance (Low K board) RθJC 165.39 °C/W Low K (JEDEC 1s) board 2
Junction-to-case thermal resistance (High K board) RθJC 165.39 °C/W High K (JEDEC 2s2p) board 2

CAD (KiCad official)

  • Symbol: TPS79730QDCKRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tps79730qdckrq1-etched.step / tps79730qdckrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps79730qdckrq1.step / tps79730qdckrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (16 pp, sha256 1c4871760dc44d55, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF