3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3232CPE
lingxingic · RS232 ICs · DIP-16
MAX3232CPE from lingxingic, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive plate of charge-pump capacitor C1; the datasheet requires four 0.2 µF external charge-pump capacitors (C1-C4). |
| 2 | V+ | power_out | Charge-pump positive supply output; absolute maximum V+ is -0.3 V to +7 V and V+ − V- must be less than 13 V. |
| 3 | C1- | passive | Negative plate of charge-pump capacitor C1. |
| 4 | C2+ | passive | Positive plate of charge-pump capacitor C2. |
| 5 | C2- | passive | Negative plate of charge-pump capacitor C2. |
| 6 | V- | power_out | Charge-pump negative supply output; absolute maximum V- is -7 V to -0.3 V. |
| 7 | TOUT2 | output | Channel 2 RS-232 driver output; absolute maximum range is -13.2 V to +13.2 V. |
| 8 | RIN2 | input | Channel 2 receiver input; input voltage range is -15 V to +15 V with input resistance of 3 kΩ min, 5 kΩ typ, 7 kΩ max. |
| 9 | ROUT2 | output | Channel 2 receiver output; absolute maximum range is -0.3 V to VCC+0.3 V. |
| 10 | TIN2 | input | Channel 2 driver input; absolute maximum range is -0.3 V to +6 V, with VIL max 0.8 V and VIH min 2.4 V at VCC=5 V. |
| 11 | TIN1 | input | Channel 1 driver input; absolute maximum range is -0.3 V to +6 V, with VIL max 0.8 V and VIH min 2.4 V at VCC=5 V. |
| 12 | ROUT1 | output | Channel 1 receiver output; absolute maximum range is -0.3 V to VCC+0.3 V. |
| 13 | RIN1 | input | Channel 1 receiver input; input voltage range is -15 V to +15 V with input resistance of 3 kΩ min, 5 kΩ typ, 7 kΩ max. |
| 14 | TOUT1 | output | Channel 1 RS-232 driver output; absolute maximum range is -13.2 V to +13.2 V. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage input, 3 V to 5.5 V; absolute maximum range is -0.3 V to +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | lingxingic |
| Package | DIP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 Supply voltage (absolute max) | VCC | -0.3 | 6 | V | 6 | ||
| 正输出电源电压 Positive output supply voltage | V+ | -0.3 | 7 | V | 6 | ||
| 负输出电源电压 Negative output supply voltage | V- | -7 | -0.3 | V | 6 | ||
| 正负电源差 Supply difference | V+ - V- | 13 | V | 6 | |||
| 驱动器输入电压 Driver input voltage | TIN1,TIN2 | -0.3 | 6 | V | 6 | ||
| 驱动器输出电压 Driver output voltage | TOUT1,TOUT2 | -13.2 | 13.2 | V | 6 | ||
| 接收器输入电压 Receiver input voltage | RIN1,RIN2 | -15 | 15 | V | 6 | ||
| 接收器输出电压 Receiver output voltage | ROUT1,ROUT2 | -0.3 | V | 6 | |||
| ESD HBM 总线引脚 bus pins | -15 | 15 | kV | HBM | 6 | ||
| ESD HBM 所有其他引脚 all other pins | -7 | 7 | kV | HBM | 6 | ||
| 电源电压范围 Supply voltage range | VCC | 3 | 5.5 | V | 3 | ||
| 工作温度范围 Operating temperature range | Tamb | -40 | 85 | ℃ | 3 | ||
| 静态电流 Supply current (ICC) | ICC | 0.9 | 1.5 | mA | 无负载,VCC=3.3V,TINx=GND 或 VCC,Tamb=25℃ | 6 | |
| 静态电流 Supply current (ICC) | ICC | 1 | 1.5 | mA | 无负载,VCC=5V,TINx=GND 或 VCC,Tamb=25℃ | 6 | |
| TX 输入低电平 Driver input low | VIL | 0.8 | V | TIN1,TIN2,VCC=3.3V | 6 | ||
| TX 输入高电平 Driver input high | VIH | 2 | V | TIN1,TIN2,VCC=3.3V | 6 | ||
| TX 输入高电平 Driver input high | VIH | 2.4 | V | TIN1,TIN2,VCC=5.0V | 6 | ||
| TX 输入漏电 Driver input leakage | IIL | -1 | 0.1 | 15 | μA | TIN1,TIN2,VIN=0V~VCC,Tamb=25℃ | 6 |
| TX 输出电压 Driver output voltage swing | TVOUT | -5 | 5.4 | V | RL=3kΩ,TINx=GND或VCC,VCC=3.3V | 6 | |
| TX 输出短路电流 Driver short-circuit current | TOSC | -60 | 25 | 60 | mA | VOUT=0V,VCC=3.3V | 7 |
| RX 输入电压范围 Receiver input voltage range | VIN | -15 | 15 | V | 7 | ||
| RX 低输入阈值 Receiver low input threshold | VIT- | 0.6 | 1.3 | V | VCC=3.3V | 7 | |
| RX 低输入阈值 Receiver low input threshold | VIT- | 0.8 | 1.3 | V | VCC=5.0V | 7 | |
| RX 高输入阈值 Receiver high input threshold | VIT+ | 1.6 | 2.4 | V | VCC=3.3V | 7 | |
| RX 输入电阻 Receiver input resistance | RXR | 3 | 5 | 7 | kΩ | 7 | |
| RX 输出漏电 Receiver output leakage | ROI | -15 | 2.4 | 10 | μA | ROUT1,ROUT2,VCC=3.3V | 7 |
| RX 输出漏电 Receiver output leakage | ROI | -15 | 2.7 | 10 | μA | ROUT1,ROUT2,VCC=5.0V | 7 |
| RX 输出低电平 Receiver output low | VOL | 90 | 300 | mV | ROUT1,ROUT2,IOUT=1.5mA,VCC=3.3V | 7 | |
| RX 输出低电平 Receiver output low | VOL | 70 | 300 | mV | ROUT1,ROUT2,IOUT=1.5mA,VCC=5V | 7 | |
| RX 输出高电平 Receiver output high | VOH | 3.2 | V | ROUT1,ROUT2,IOUT=-1.5mA,VCC=3.3V | 7 | ||
| RX 输出高电平 Receiver output high | VOH | 4.9 | V | ROUT1,ROUT2,IOUT=-1.5mA,VCC=5V | 7 | ||
| 最大传输速率 Maximum data rate | fMAX | 250 | Kbps | RL=3kΩ,CL=1000pF,1 个通道工作 | 7 | ||
| 摆率 Slew rate (raise) | SR | 6 | 9 | 30 | V/μs | TX,Vcc=3.3V/5V,RL=3kΩ,CL=1000pF,raise | 7 |
| 摆率 Slew rate (fall) | SR | 6 | 11 | 30 | V/μs | TX,Vcc=3.3V/5V,RL=3kΩ,CL=1000pF,fall | 7 |
| 传输延时 Propagation delay tDPLH | tDPLH | 600 | 800 | ns | CL=150pF | 7 | |
| 传输延时 Propagation delay tDPHL | tDPHL | 620 | 800 | ns | CL=150pF | 7 | |
| 延时偏差 Driver delay skew | ∆tDP | 20 | 300 | ns | tDPLH − tDPHL | 7 | |
| 接收器传输延时 Receiver tRPHL | tRPHL | 160 | 300 | ns | RX,Vcc=3.3V,CL=150pF | 7 | |
| 接收器传输延时 Receiver tRPHL | tRPHL | 180 | 300 | ns | RX,Vcc=5V,CL=150pF | 7 | |
| 接收器传输延时 Receiver tRPLH | tRPLH | 150 | 400 | ns | RX,Vcc=3.3V,CL=150pF | 7 | |
| 接收器传输延时 Receiver tRPLH | tRPLH | 210 | 400 | ns | RX,Vcc=5V,CL=150pF | 7 | |
| 接收器延时偏差 Receiver delay skew | ∆tRP | 10 | 100 | ns | Vcc=3.3V,tRPLH − tRPHL | 7 | |
| 接收器延时偏差 Receiver delay skew | ∆tRP | 30 | 100 | ns | Vcc=5V,tRPLH − tRPHL | 7 | |
| TX 输出电阻 Driver output resistance | TROUT | 2 | MΩ | Vcc=V+=V-=0V,TOUTx=+2V | 6 | ||
| TX 输出短路电流 Driver short-circuit current | TOSC | 30 | mA | VOUT=0V,VCC=5V | 7 | ||
| RX 输入迟滞电压 Receiver input hysteresis | RXHYS | 0.3 | V | 7 |
CAD (KiCad official)
- Symbol:
MAX3232CPE - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
max3232cpe-etched.step/max3232cpe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232cpe.step/max3232cpe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: lingxingic datasheet (10 pp, sha256
9769c6c1fed38749, retrieved 2026-10-14, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).