3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCA9555
NOVOSENSE · I/O Expanders · TSSOP-24
NCA9555 from NOVOSENSE, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /INT | output | Active-LOW open-drain interrupt output that is activated when an input pin changes state; it requires a minimum IOL of 3 mA at VOL = 0.4 V. |
| 2 | A1 | input | Address input 1 that sets the device I2C address bit A1; it accepts VIH of 0.7VDD to 5.5 V and VIL up to 0.3VDD. |
| 3 | A2 | input | Address input 2 that sets the device I2C address bit A2; it accepts VIH of 0.7VDD to 5.5 V and VIL up to 0.3VDD. |
| 4 | IO0_0 | bidirectional | Port 0 input/output bit 0 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 5 | IO0_1 | bidirectional | Port 0 input/output bit 1 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 6 | IO0_2 | bidirectional | Port 0 input/output bit 2 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 7 | IO0_3 | bidirectional | Port 0 input/output bit 3 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 8 | IO0_4 | bidirectional | Port 0 input/output bit 4 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 9 | IO0_5 | bidirectional | Port 0 input/output bit 5 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 10 | IO0_6 | bidirectional | Port 0 input/output bit 6 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 11 | IO0_7 | bidirectional | Port 0 input/output bit 7 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 12 | VSS | power_in | Supply ground for the device. |
| 13 | IO1_0 | bidirectional | Port 1 input/output bit 0 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 14 | IO1_1 | bidirectional | Port 1 input/output bit 1 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 15 | IO1_2 | bidirectional | Port 1 input/output bit 2 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 16 | IO1_3 | bidirectional | Port 1 input/output bit 3 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 17 | IO1_4 | bidirectional | Port 1 input/output bit 4 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 18 | IO1_5 | bidirectional | Port 1 input/output bit 5 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 19 | IO1_6 | bidirectional | Port 1 input/output bit 6 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 20 | IO1_7 | bidirectional | Port 1 input/output bit 7 that can be configured as an input or output; each I/O is limited to 25 mA and each octal to 100 mA. |
| 21 | A0 | input | Address input 0 that sets the device I2C address bit A0; it accepts VIH of 0.7VDD to 5.5 V and VIL up to 0.3VDD. |
| 22 | SCL | input | I2C serial clock line; VIH is 0.7VDD to 5.5 V and VIL is up to 0.3VDD, with a 0 to 400 kHz clock frequency. |
| 23 | SDA | bidirectional | I2C serial data line that must be pulled up to the positive supply; VOL is 0.4 V at a minimum IOL of 3 mA. |
| 24 | VDD | power_in | Supply voltage, specified from 2.3 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NOVOSENSE |
| Package | TSSOP-24 |
| Category | Interface |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.5 | 6 | V | 5 | ||
| Voltage on an input/output pin | VI/O | 6 | V | 5 | |||
| Output current | IO | -50 | 50 | mA | On an I/O pin | 5 | |
| Input current | II | -20 | 20 | mA | 5 | ||
| Supply current | IDD | 160 | mA | 5 | |||
| Ground supply current | ISS | 200 | mA | 5 | |||
| Total power dissipation | Ptot | 200 | mW | 5 | |||
| Maximum junction temperature | Tj(max) | 125 | ℃ | 5 | |||
| Storage temperature | Tstg | -65 | 150 | ℃ | 5 | ||
| Ambient temperature | Tamb | -40 | 85 | ℃ | Operating | 5 | |
| Supply voltage | VCCA | 2.3 | 5.5 | V | 6 | ||
| High-level input voltage | VIH | 5.5 | V | 6 | |||
| Low-level input voltage | VIL | -0.5 | V | 6 | |||
| High-level output current | IOH | -10 | mA | 6 | |||
| Low-level output current (P00-P07, P10-P17) | IOL | 10 | mA | 6 | |||
| Low-level output current (/INT, SDA) | IOL | 3.5 | mA | 6 | |||
| Operating free-air temperature | TA | -40 | 85 | ℃ | 6 | ||
| Supply voltage range | VDD | 2.3 | 5.5 | V | 7 | ||
| Power On Reset | VPOR | 0.94 | 1.5 | V | no load; VI = VDD or VSS | 7 | |
| Supply current | IDD | 5.74 | 90 | µA | Operating mode; VDD = 5.5 V; no load; fSCL = 100 kHz | 7 | |
| Standby current | Istb | 0.9 | 1.5 | mA | Standby mode; VDD = 5.5 V; no load; VI = VSS; fSCL = 0 kHz; I/O = inputs | 7 | |
| Standby current | Istb | 0.25 | 1 | µA | Standby mode; VDD = 5.5 V; no load; VI = VDD; fSCL = 0 kHz; I/O = inputs | 7 | |
| LOW-level input voltage (SCL, SDA) | VIL | -0.5 | V | 7 | |||
| HIGH-level input voltage (SCL, SDA) | VIH | 5.5 | V | 7 | |||
| LOW-level output current (SDA) | IOL | 3 | mA | VDD = 2.3 V to 5.5 V; VOL = 0.4 V | 7 | ||
| Input leakage current (SCL, SDA) | IL | -1 | 1 | µA | VDD = 2.3 V to 5.5 V; VI = VDD or VSS | 7 | |
| Input capacitance (SCL, SDA) | Ci | 6 | 10 | pF | VI = VSS | 7 | |
| LOW-level input voltage (I/Os) | VIL | -0.5 | V | 7 | |||
| HIGH-level input voltage (I/Os) | VIH | 5.5 | V | 7 | |||
| LOW-level output current (I/Os) | IOL | 8 | mA | VDD = 2.3 V to 5.5 V; VOL = 0.5 V | 7 | ||
| LOW-level output current (I/Os) | IOL | 10 | mA | VDD = 2.3 V to 5.5 V; VOL = 0.7 V | 7 | ||
| HIGH-level output voltage | VOH | 1.8 | V | IOH = -8 mA; VDD = 2.3 V | 7 | ||
| HIGH-level output voltage | VOH | 1.7 | V | IOH = -10 mA; VDD = 2.3 V | 8 | ||
| HIGH-level output voltage | VOH | 2.6 | V | IOH = -8 mA; VDD = 3.0 V | 8 | ||
| HIGH-level output voltage | VOH | 2.5 | V | IOH = -10 mA; VDD = 3.0 V | 8 | ||
| HIGH-level output voltage | VOH | 4.3 | V | IOH = -8 mA; VDD = 4.75V | 8 | ||
| HIGH-level output voltage | VOH | 4 | V | IOH = -10 mA; VDD = 4.75V | 8 | ||
| HIGH-level input leakage current | ILIH | 1 | µA | VDD = 5.5 V; VI = VDD | 8 | ||
| LOW-level input leakage current | ILIL | -100 | µA | VDD = 5.5 V; VI = VSS | 8 | ||
| Input capacitance (I/Os) | Ci | 3.7 | 5 | pF | 8 | ||
| Output capacitance | Co | 3.7 | 5 | pF | 8 | ||
| LOW-level output current (/INT) | IOL | 3 | mA | VDD = 2.3 V to 5.5 V; VOL=0.4V | 8 | ||
| LOW-level input voltage (A0, A1, A2) | VIL | -0.5 | V | 8 | |||
| HIGH-level input voltage (A0, A1, A2) | VIH | 5.5 | V | 8 | |||
| Input leakage current (A0, A1, A2) | ILI | -1 | 1 | µA | VDD = 2.3 V to 5.5 V; VI = VDD or VSS | 8 | |
| SCL clock frequency | fSCL | 0 | 100 | kHz | Standard-mode I2C-bus | 9 | |
| SCL clock frequency | fSCL | 0 | 400 | kHz | Fast-mode I2C-bus | 9 | |
| LOW period of the SCL clock | tLOW | 4.7 | µs | Standard-mode I2C-bus | 9 | ||
| LOW period of the SCL clock | tLOW | 1.3 | µs | Fast-mode I2C-bus | 9 | ||
| HIGH period of the SCL clock | tHIGH | 4 | µs | Standard-mode I2C-bus | 9 | ||
| HIGH period of the SCL clock | tHIGH | 0.6 | µs | Fast-mode I2C-bus | 9 | ||
| Bus free time between a STOP and START condition | tBUF | 4.7 | µs | Standard-mode I2C-bus | 9 | ||
| Bus free time between a STOP and START condition | tBUF | 1.3 | µs | Fast-mode I2C-bus | 9 | ||
| Data set-up time | tSU;DAT | 250 | ns | Standard-mode I2C-bus | 9 | ||
| Data set-up time | tSU;DAT | 100 | ns | Fast-mode I2C-bus | 9 | ||
| Hold time (repeated) START condition | tHD;STA | 4 | µs | Standard-mode I2C-bus | 9 | ||
| Hold time (repeated) START condition | tHD;STA | 0.6 | µs | Fast-mode I2C-bus | 9 | ||
| Pulse width of spikes suppressed by the input filter | tSP | 50 | ns | Standard-mode I2C-bus | 10 | ||
| Valid time on pin /INT | tv(INT_N) | 4 | µs | Measured from 50% IO input to 0.3VDD on /INT | 10 |
CAD (KiCad official)
- Symbol:
NCA9555 - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
nca9555-etched.step/nca9555-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nca9555.step/nca9555.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NOVOSENSE datasheet (26 pp, sha256
0e4bb047f0fdc5e7, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).