component
XC081S021
Public Made by Adomby adom
Si Change Analog To Digital Converters (ADC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC081S021
Si Change · Analog To Digital Converters (ADC) · SOT-23-6
XC081S021 from Si Change, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VA | power_in | Power supply input for 3.3 V to 5.25 V operation, which also serves as the ADC reference voltage. |
| 2 | GND | power_in | Analog input signal ground; all analog and digital signals are referenced to this pin. |
| 3 | VIN | power_in | Analog signal input with a range of 0 V to VA. |
| 4 | SCLK | input | Serial clock input that directly controls the conversion and readout process. |
| 5 | SDATA | output | Serial data output; it enters tri-state after the 12th falling edge of SCLK, ending the conversion cycle. |
| 6 | CS | input | Active-low chip select; pulling it low starts a conversion cycle and it must be held high for at least 1 µs after SDATA tri-states before the next conversion. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Si Change |
| Package | SOT-23-6 |
| Category | Data Acquisition |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (single supply) | VA | 3.3 | 5.25 | V | 单电源供电 | 1 | |
| Sample rate | 50 | 200 | KSPS | 1 | |||
| Operating temperature range | -40 | 85 | ℃ | 1 | |||
| Integral nonlinearity error (INL) | INL | -0.5 | 0.5 | LSB | 2 | ||
| Differential nonlinearity error (DNL) | DNL | -0.5 | 0.5 | LSB | 2 | ||
| Resolution | 8 | 位 | 无失码 (no missing codes) | 2 | |||
| Typical power consumption | 2.2 | mW | 5V，200 KSPS | 1 | |||
| Typical power consumption | 0.99 | mW | 3.3V，200 KSPS | 1 | |||
| Signal-to-noise and distortion ratio (SNR) | SNR | 49.5 | dB | @100 KHz | 2 | ||
| Total harmonic distortion (THD) | THD | -66 | dB | @100 KHz | 2 |
CAD (KiCad official)
- Symbol:
XC081S021 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
xc081s021-etched.step/xc081s021-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc081s021.step/xc081s021.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Si Change datasheet (4 pp, sha256
ce7eedebe15c61e1, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).