3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTM1925D
TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-14-150mil
TM1925D from TM(Shenzhen Titan Micro Elec), in a SOP-14-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Logic supply pin with an internal 5 V regulator; recommended supply is 4.5 to 5.5 V (5.0 V typical) with an absolute maximum of -0.4 to +7.0 V, and a 6 to 24 V supply is possible with a series resistor selected from the datasheet table. |
| 2 | SET | input | Channel-select input with an internal pull-down: SET=1 enables 6 channels (two RGB groups, 24x2 bit data), while SET=0 or floating enables all 9 channels. |
| 3 | DO | output | Serial data output that forwards the DIN data stream to the next cascaded chip after 24x3 bits are received; VOH is at least VDD-0.5 V at -6 mA and VOL is at most 0.4 V at 10 mA. |
| 4 | OUTR3 | output | Red PWM constant-current output for channel 3, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 5 | OUTG3 | output | Green PWM constant-current output for channel 3, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 6 | OUTB3 | output | Blue PWM constant-current output for channel 3, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 7 | GND | power_in | System ground pin, to be connected to the system ground (0 V reference for all voltage ratings). |
| 8 | OUTB2 | output | Blue PWM constant-current output for channel 2, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 9 | OUTG2 | output | Green PWM constant-current output for channel 2, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 10 | OUTR2 | output | Red PWM constant-current output for channel 2, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 11 | OUTB1 | output | Blue PWM constant-current output for channel 1, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 12 | OUTG1 | output | Green PWM constant-current output for channel 1, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 13 | OUTR1 | output | Red PWM constant-current output for channel 1, rated for 17 mA typical (16 to 18 mA) with an OUT withstand voltage of 24 V when off and an absolute range of -0.4 to +30.0 V. |
| 14 | DIN | input | Serial data input that requires VIH of at least 3.5 V and VIL of at most 1.35 V at VDD=5.0 V, with a data clock rate of 400 to 900 kHz (800 kHz typical) and an input range of -0.5 to VDD+0.4 V through a 1 kΩ series resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-14-150mil |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | VDD | -0.4 | 7 | V | 3 | ||
| Input voltage range DIN, SET | Vin | -0.4 | V | DIN, SET | 3 | ||
| Output current (DC) | Iout | 18 | mA | OUTR, OUTG, OUTB | 3 | ||
| Output voltage range | Vout | -0.4 | 30 | V | OUTR, OUTG, OUTB | 3 | |
| DIN clock rate | Fosc | 400 | 900 | KHz | DIN | 3 | |
| Operating temperature range | Topr | -40 | 85 | ℃ | 3 | ||
| Storage temperature range | Tstg | -55 | 150 | ℃ | 3 | ||
| ESD human body model | ESD | 2000 | V | Human body model (HBM) | 3 | ||
| Supply voltage | VDD | 4.5 | 5 | 5.5 | V | 3 | |
| Input voltage range DIN, SET | VIN | -0.5 | V | VDD=5V, DIN, SET in series with 1K resistor | 3 | ||
| DO output voltage range | VDO | -0.5 | V | VDD=5V, DO in series with 1K resistor | 3 | ||
| OUT output voltage range | VOUT | -0.5 | 24 | V | OUT=OFF | 3 | |
| Operating temperature range | TA | -40 | 85 | ℃ | 3 | ||
| Operating junction temperature range | TJ | -40 | 125 | ℃ | 3 | ||
| Low-level output voltage DO | VOL | 0.4 | V | IOL=10mA: DO | 3 | ||
| High-level input voltage | VIH | 3.5 | V | VDD=5.0V | 3 | ||
| Low-level input voltage | VIL | 0 | 1.35 | V | VDD=5.0V | 3 | |
| DIN, SET input current | Iin | -1 | 1 | μA | DIN、SET 接 VDD 或 GND | 3 | |
| Logic supply current (VDD) | Icco | 1.2 | 3 | 4.2 | mA | OUTR,OUTG,OUTB,DIN, DO=开路 | 3 |
| Constant output current range | Iolc | 16 | 17 | 18 | mA | OUTR,OUTG,OUTB= 3.0V | 3 |
| Output leakage current | Iolkg | 0 | 0.3 | μA | OUTR,OUTG, OUTB =OFF | 3 | |
| Thermal resistance junction-to-ambient | Rth(j-a) | 79.2 | 190 | ℃/W | 3 | ||
| Power dissipation | PD | 1.5 | W | Ta=25°C | 3 | ||
| PWM output duty cycle period | TPWM | 270 | 280 | 290 | μs | OUT with pull-up resistor | 4 |
| Constant current error (channel to channel) | ΔIolc0 | -2.5 | 2.5 | % | OUTR,OUTG,OUTB =ON, VOUTn =1V | 4 | |
| Constant current error (chip to chip) | ΔIolc1 | -5 | 5 | % | OUTR,OUTG,OUTB =ON, VOUTn =1V | 4 | |
| Line regulation | ΔIolc2 | -1 | 0.5 | 1 | %/V | OUTR,OUTG,OUTB =ON, VOUTn =1V | 4 |
| Load regulation | ΔIolc3 | -3 | 1 | 3 | %/V | OUTR,OUTG,OUTB =ON, VOUTn =1V~3V | 4 |
| OUT PWM output frequency | FOUT | 3 | 3.8 | 4.5 | KHz | OUTR, OUTG, OUTB | 4 |
| Input 0 code high-level time | T0H | 250 | 350 | 450 | ns | VDD=5V, GND=0V | 5 |
| Input 1 code high-level time | T1H | 620 | 750 | 900 | ns | VDD=5V, GND=0V | 5 |
| Reset code low-level time | Treset | 24 | μs | 5 |
CAD (KiCad official)
- Symbol:
TM1925D - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14-150mil (KiCad packages3D, STEP)
- 3D model files:
tm1925d-etched.step/tm1925d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm1925d.step/tm1925d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (10 pp, sha256
c6e981820c034607, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).