component
AMC1035D
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownAMC1035D
Texas Instruments · ADCs/DACs - Special Purpose · SOIC-8
AMC1035D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCE | input | Manchester coding enable, active high, with an internal pulldown resistor (typical 200 kΩ); its polarity must not be changed while the clock signal is applied. |
| 2 | AINP | input | Noninverting analog input. |
| 3 | AINN | input | Inverting analog input. |
| 4 | REFOUT | output | Reference output at 2.5 V nominal, with a maximum of ±5 mA sink and source capability. |
| 5 | GND | power_in | Ground reference. |
| 6 | DOUT | output | Modulator bitstream data output, updated on the rising edge of CLKIN; it is Manchester coded when MCE is high, and the rising clock edge should be used to latch it into the digital filter. |
| 7 | CLKIN | input | Modulator clock input with a 9 MHz to 21 MHz range and an internal pulldown resistor (typical 200 kΩ); the clock must be applied continuously for proper operation. |
| 8 | VDD | power_in | Power supply, 3.0 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Data Acquisition |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
AMC1035D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
amc1035d-etched.step/amc1035d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);amc1035d.step/amc1035d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
10fd1c5954f6a4c1, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).