component
SN74AUP1G240DBVR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74AUP1G240DBVR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · SOT-23-5
SN74AUP1G240DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output enable; the output is disabled when OE is high, and OE should be tied to VCC through a pullup resistor to keep the output high-impedance during power up or power down. |
| 2 | A | input | Data input whose VIH and VIL limits depend on VCC per the Recommended Operating Conditions, with an input transition rise or fall rate of up to 200 ns/V; it may float only while OE is high, otherwise it must be held at VCC or GND. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | Y | output | 3-state driver output, with continuous output current limited to ±20 mA per the Absolute Maximum Ratings. |
| 5 | VCC | power_in | Positive supply, operating from 0.8 V to 3.6 V; a 0.1-µF bypass capacitor is recommended as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Logic |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
SN74AUP1G240DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sn74aup1g240dbvr-etched.step/sn74aup1g240dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74aup1g240dbvr.step/sn74aup1g240dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
75824d8041ba89ac, retrieved 2026-10-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).