component
LTC6752IS5#TRMPBF
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC6752IS5#TRMPBF
Analog Devices · Pre-ordered Chips · TSOT-23-5
LTC6752IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q | output | Comparator output, driven high when +IN > -IN and driven low when +IN < -IN. |
| 2 | VEE | power_in | Negative power supply, normally tied to ground; it may be tied to another voltage if the total supply voltage constraints relative to VCC are maintained (total VCC to VEE is 2.45V to 3.5V and 3.6V absolute maximum for the LTC6752). |
| 3 | +IN | input | Positive input of the comparator; the voltage range can go from VEE to VCC. |
| 4 | -IN | input | Negative input of the comparator; the voltage range can go from VEE to VCC. |
| 5 | VCC | power_in | Positive supply voltage for the LTC6752 (total supply, 2.45V to 3.5V, 3.6V absolute maximum); bypass per the high-speed board guidelines. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Current (+IN, -IN, SHDN, LE/HYST) | -10 | 10 | mA | Note 2; printed as ±10mA | 2 | ||
| Output Current (Q, Q) | -50 | 50 | mA | Note 3; printed as ±50mA | 2 | ||
| Storage Temperature Range | -65 | 125 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | Note 3 | 2 | ||
| Lead Temperature Soldering | 300 | °C | 10s | 2 | |||
| Specified Temperature Range (LTC6752I) | -40 | 85 | °C | LTC6752I grade, Note 4 | 2 | ||
| Thermal resistance, junction to ambient | θJA | 215 | °C/W | 5-lead plastic TSOT-23 (S5), Note 3 | 2 | ||
| VCC - VEE Supply Voltage (Total Supply) | VCC - VEE | 2.45 | 3.5 | V | LTC6752/LTC6752-1 total supply; l | 3 | |
| Input Offset Voltage | VOS | -5.5 | 1.2 | 5.5 | mV | VCC=2.5V, VDD=2.5V, VEE=0; l; Note 6; first limit set | 3 |
| Input Bias Current, VCM = VEE + 0.3V | IB | -3.8 | -1.35 | µA | VCC=2.5V, VCM = VEE + 0.3V; l; first limit set | 3 | |
| Input Bias Current, VCM = VCC - 0.3V | IB | 0.3 | 1.25 | µA | VCC=2.5V, VCM = VCC - 0.3V; l; first limit set | 3 | |
| Input Offset Current | IOS | -0.75 | 0.1 | 0.75 | µA | VCC=2.5V; l | 3 |
| Common Mode Input Range, Low VCM Region (CMRR) | CMRR_LVCM | 51 | 69 | dB | VCM = VEE, 0.2V to VCC, 1.5V; l | 3 | |
| Common Mode Rejection Ratio (extreme ends of VCMR) | CMRR_FR | 50 | 65 | dB | VCM = VEE, 0.2V to VCC + 0.1V; l | 3 | |
| Total Power Supply Rejection Ratio | 53 | 73 | dB | VCM = 0.3V, VCC varied 2.45V to 3.5V (LTC6752/LTC6752-1); l | 4 | ||
| Output High Voltage (amount below VCC) | VOH | 130 | 260 | 340 | mV | VCC=2.5V; ISOURCE = 8mA; l | 4 |
| Output Low Voltage (referred to VEE) | VOL | 200 | 340 | 400 | mV | VCC=2.5V; ISINK = 8mA; l | 4 |
| Output Short-Circuit Current Source | ISC | 16 | 30 | mA | VCC=2.5V; l; first limit set | 4 | |
| Output Short-Circuit Current Sink | ISC | 15 | 22 | mA | VCC=2.5V; l; first limit set | 4 | |
| VCC Supply Current, Device On (LTC6752/LTC6752-1) | IVCC | 4.5 | 5 | 5.9 | mA | VCC=2.5V; l | 4 |
| Total Supply Current, Device On (LTC6752/LTC6752-1) | ITOTAL | 4.5 | 5 | 5.9 | mA | VCC=2.5V; l | 4 |
| Propagation Delay | tPD | 2.9 | 5 | ns | VCC=2.5V; VOVERDRIVE = 50mV; l; first limit set | 4 | |
| Input Offset Voltage | VOS | -5.5 | 1.2 | 5.5 | mV | VCC=3.3V, VDD=3.3V, VEE=0; l; Note 6; first limit set | 5 |
| Input Bias Current, VCM = VEE + 0.3V | IB | -3.8 | -1.4 | µA | VCC=3.3V, VCM = VEE + 0.3V; l; first limit set | 5 | |
| Input Bias Current, VCM = VCC - 0.3V | IB | 0.33 | 1.5 | µA | VCC=3.3V, VCM = VCC - 0.3V; l; first limit set | 5 | |
| Input Offset Current | IOS | -0.75 | 0.1 | 0.75 | µA | VCC=3.3V; l | 5 |
| Common Mode Input Range, Low VCM Region (CMRR) | CMRR_LVCM | 52 | 70 | dB | VCC=3.3V; VCM = VEE, 0.2V to VCC, 1.5V; l | 6 | |
| Common Mode Rejection Ratio (extreme ends of VCMR) | CMRR_FR | 50 | 66 | dB | VCC=3.3V; VCM = VEE, 0.2V to VCC + 0.1V; l | 6 | |
| Total Power Supply Rejection Ratio | 53 | 73 | dB | VCM = 0.3V, VCC varied 2.45V to 3.5V (LTC6752/LTC6752-1); l | 6 | ||
| Output High Voltage (amount below VCC) | VOH | 81 | 200 | 300 | mV | VCC=3.3V; ISOURCE = 8mA; l | 6 |
| Output Low Voltage (referred to VEE) | VOL | 155 | 320 | 350 | mV | VCC=3.3V; ISINK = 8mA; l | 6 |
| Output Short-Circuit Current Source | ISC | 35 | 70 | mA | VCC=3.3V; l; first limit set | 6 | |
| Output Short-Circuit Current Sink | ISC | 20 | 39 | mA | VCC=3.3V; l; first limit set | 6 | |
| VCC Supply Current, Device On (LTC6752/LTC6752-1) | IVCC | 4.8 | 5.8 | 6.2 | mA | VCC=3.3V; l | 6 |
| Total Supply Current, Device On (LTC6752/LTC6752-1) | ITOTAL | 4.8 | 5.8 | 6.2 | mA | VCC=3.3V; l | 6 |
| Propagation Delay | tPD | 3 | 5 | ns | VCC=3.3V; VOVERDRIVE = 50mV; l; first limit set | 6 |
CAD (KiCad official)
- Symbol:
LTC6752IS5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ltc6752is5-trmpbf-etched.step/ltc6752is5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6752is5-trmpbf.step/ltc6752is5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (30 pp, sha256
d0e3d938d1b220ae, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).