3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXMC1401F064F0128AAXUMA1
Infineon Technologies · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
XMC1401F064F0128AAXUMA1 from Infineon Technologies, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSSP | power_in | I/O port ground (VSSP) for the port pad ring; GND reference for the I/O pads. |
| 2 | VDDP | power_in | I/O port supply for the port pad ring. |
| 3 | P4.6 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4; doubles as boot pin HWCON0 when boot-from-pins mode is selected. |
| 4 | P4.7 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4; doubles as boot pin HWCON1 when boot-from-pins mode is selected. |
| 5 | P4.8 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 6 | P4.9 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 7 | P4.10 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 8 | P4.11 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 9 | P2.0 | bidirectional | Standard bidirectional pad with analog input (STD_INOUT/AN) of Port 2 with alternate functions per Table 9. |
| 10 | P2.1 | bidirectional | Standard bidirectional pad with analog input (STD_INOUT/AN) of Port 2 with alternate functions per Table 9. |
| 11 | P2.2 | input | Standard input pad with analog input (STD_IN/AN) of Port 2; input-only with alternate functions per Table 9. |
| 12 | P2.3 | input | Standard input pad with analog input (STD_IN/AN) of Port 2; input-only with alternate functions per Table 9. |
| 13 | P2.4 | input | Standard input pad with analog input (STD_IN/AN) of Port 2; input-only with alternate functions per Table 9. |
| 14 | P2.5 | input | Standard input pad with analog input (STD_IN/AN) of Port 2; input-only with alternate functions per Table 9. |
| 15 | P2.6 | input | Standard input pad with analog input (STD_IN/AN) of Port 2; input-only with alternate functions per Table 9. |
| 16 | P2.7 | input | Standard input pad with analog input (STD_IN/AN) of Port 2; input-only with alternate functions per Table 9. |
| 17 | P2.8 | input | Standard input pad with analog input (STD_IN/AN) of Port 2; input-only with alternate functions per Table 9. |
| 18 | P2.9 | input | Standard input pad with analog input (STD_IN/AN) of Port 2; input-only with alternate functions per Table 9. |
| 19 | P2.10 | bidirectional | Standard bidirectional pad with analog input (STD_INOUT/AN) of Port 2 with alternate functions per Table 9. |
| 20 | P2.11 | bidirectional | Standard bidirectional pad with analog input (STD_INOUT/AN) of Port 2 with alternate functions per Table 9. |
| 21 | P2.12 | bidirectional | Standard bidirectional pad with analog input (STD_INOUT/AN) of Port 2 with alternate functions per Table 9. |
| 22 | P2.13 | bidirectional | Standard bidirectional pad with analog input (STD_INOUT/AN) of Port 2 with alternate functions per Table 9. |
| 23 | VSS | power_in | Ground (GND) for the device and ADC reference ground. |
| 24 | VDD | power_in | Core supply (VDD) which also serves as ADC reference voltage and ORC reference voltage; when VDD is supplied, VDDP must be supplied with the same voltage. |
| 25 | VDDP | power_in | I/O port supply; when VDD is supplied, VDDP has to be supplied with the same voltage. |
| 26 | P1.8 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 1 with alternate functions per Table 9. |
| 27 | P1.7 | bidirectional | High-current bidirectional pad (High Current) of Port 1 with alternate functions per Table 9. |
| 28 | P1.6 | bidirectional | High-current bidirectional pad (High Current) of Port 1 with alternate functions per Table 9. |
| 29 | P1.5 | bidirectional | High-current bidirectional pad (High Current) of Port 1 with alternate functions per Table 9. |
| 30 | P1.4 | bidirectional | High-current bidirectional pad (High Current) of Port 1 with alternate functions per Table 9. |
| 31 | P1.3 | bidirectional | High-current bidirectional pad (High Current) of Port 1; SWDIO_1 in SWD debug mode and SPD_1 in SPD debug mode (Table 6). |
| 32 | P1.2 | bidirectional | High-current bidirectional pad (High Current) of Port 1; SWDCLK_1 in SWD debug mode (Table 6). |
| 33 | P1.1 | bidirectional | High-current bidirectional pad (High Current) of Port 1 with alternate functions per Table 9. |
| 34 | P1.0 | bidirectional | High-current bidirectional pad (High Current) of Port 1 with alternate functions per Table 9. |
| 35 | VDDP | power_in | I/O port supply. |
| 36 | P3.0 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 3 with alternate functions per Table 9. |
| 37 | P3.1 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 3 with alternate functions per Table 9. |
| 38 | P3.2 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 3 with alternate functions per Table 9. |
| 39 | P3.3 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 3 with alternate functions per Table 9. |
| 40 | P3.4 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 3 with alternate functions per Table 9. |
| 41 | P0.0 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 42 | P0.1 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 43 | P0.2 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 44 | P0.3 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 45 | P0.4 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 46 | P0.5 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 47 | P0.6 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 48 | P0.7 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 49 | VSSP | power_in | I/O port ground (VSSP) for the port pad ring; GND reference for the I/O pads. |
| 50 | VDDP | power_in | I/O port supply for the port pad ring. |
| 51 | P0.8/RTC_XTAL1 | bidirectional | Standard bidirectional pad with clock input function (STD_INOUT/clock_IN) used as RTC_XTAL1; RTC oscillator input frequency 32.768 kHz with VIX from -0.3 V to 1.5 V (Table 22). |
| 52 | P0.9/RTC_XTAL2 | bidirectional | Standard bidirectional pad with clock output function (STD_INOUT/clock_O) used as RTC_XTAL2 of the 32.768 kHz RTC oscillator. |
| 53 | P0.10/XTAL1 | bidirectional | Standard bidirectional pad with clock input function (STD_INOUT/clock_IN) used as XTAL1; 4-20 MHz in external crystal mode and 4-48 MHz in direct input mode (Table 21). |
| 54 | P0.11/XTAL2 | bidirectional | Standard bidirectional pad with clock output function (STD_INOUT/clock_O) used as XTAL2 of the main oscillator. |
| 55 | P0.12 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0 with alternate functions per Table 9. |
| 56 | P0.13 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0; CS(O) function in SSC boot-mode BSL (Table 6). |
| 57 | P0.14 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0; SWDIO_0 in SWD debug mode and ASC/CAN/SSC BSL functions per Table 6. |
| 58 | P0.15 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 0; SWDCLK_0 in SWD debug mode and ASC/CAN/SSC BSL functions per Table 6. |
| 59 | P4.0 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 60 | P4.1 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 61 | P4.2 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 62 | P4.3 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 63 | P4.4 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
| 64 | P4.5 | bidirectional | Standard bidirectional GPIO pad (STD_INOUT) of Port 4 with alternate functions per Table 9. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Junction temperature | TJ | -40 | 115 | °C | 50 | ||
| Storage temperature | TST | -40 | 125 | °C | 50 | ||
| Voltage on power supply pin with respect to VSSP | VDDP | -0.3 | 6 | V | 50 | ||
| Voltage on digital pins with respect to VSSP | VIN | -0.5 | V | max VDDP + 0.5 or 6 V, whichever is lower | 50 | ||
| Voltage on P2 pins with respect to VSSP | VINP2 | -0.3 | V | max VDDP + 0.3 V | 50 | ||
| Voltage on analog input pins with respect to VSSP | VAIN | -0.5 | V | max VDDP + 0.5 or 6 V, whichever is lower; VAREF same | 50 | ||
| Input current on any pin during overload condition | IIN | -10 | 10 | mA | 50 | ||
| Absolute maximum sum of all input currents during overload condition | ΣIIN | -50 | 50 | mA | 50 | ||
| Input current on any port pin during overload condition | IOV | -5 | 5 | mA | 51 | ||
| Absolute sum of all input circuit currents during overload condition | IOVS | 25 | mA | 51 | |||
| Ambient Temperature (Temp. Range F) | TA | -40 | 85 | °C | Temp. Range F | 52 | |
| Digital supply voltage | VDDP | 1.8 | 5.5 | V | 52 | ||
| Short circuit current of digital outputs | ISC | -5 | 5 | mA | 52 | ||
| Absolute sum of short circuit currents of the device | ΣISC_D | 25 | mA | 52 | |||
| Output low voltage on port pins (with standard pads) | VOLP | 1 | V | IOL = 11 mA (5 V); IOL = 7 mA (3.3 V) | 53 | ||
| Output low voltage on port pins (with standard pads) | VOLP | 0.4 | V | IOL = 5 mA (5 V); IOL = 3.5 mA (3.3 V) | 53 | ||
| Output low voltage on high current pads | VOLP1 | 1 | V | IOL = 50 mA (5 V); IOL = 25 mA (3.3 V) | 53 | ||
| Output low voltage on high current pads | VOLP1 | 0.32 | V | IOL = 10 mA (5 V) | 53 | ||
| Output low voltage on high current pads | VOLP1 | 0.4 | V | IOL = 5 mA (3.3 V) | 53 | ||
| Rise/fall time on High Current Pad | tHCPR, tHCPF | 9 | ns | 50 pF @ 5 V | 53 | ||
| Rise/fall time on High Current Pad | tHCPR, tHCPF | 12 | ns | 50 pF @ 3.3 V | 53 | ||
| Rise/fall time on High Current Pad | tHCPR, tHCPF | 25 | ns | 50 pF @ 1.8 V | 54 | ||
| Rise/fall time on Standard Pad | tR, tF | 12 | ns | 50 pF @ 5 V | 54 | ||
| Rise/fall time on Standard Pad | tR, tF | 15 | ns | 50 pF @ 3.3 V | 54 | ||
| Rise/fall time on Standard Pad | tR, tF | 31 | ns | 50 pF @ 1.8 V | 54 | ||
| Pin capacitance (digital inputs/outputs) | CIO | 10 | pF | 54 | |||
| Pull-up current on port pins | IPUP | -80 | µA | VIH,min (5 V) | 54 | ||
| Pull-up current on port pins | IPUP | -95 | µA | VIL,max (5 V) | 54 | ||
| Pull-up current on port pins | IPUP | -50 | µA | VIH,min (3.3 V) | 54 | ||
| Pull-up current on port pins | IPUP | -65 | µA | VIL,max (3.3 V) | 54 | ||
| Pull-down current on port pins | IPDP | 40 | µA | VIL,max (5 V) | 54 | ||
| Pull-down current on port pins | IPDP | 95 | µA | VIH,min (5 V) | 54 | ||
| Pull-down current on port pins | IPDP | 30 | µA | VIL,max (3.3 V) | 55 | ||
| Pull-down current on port pins | IPDP | 60 | µA | VIH,min (3.3 V) | 55 | ||
| Input leakage current except P0.11 | IOZP | -1 | 1 | µA | 0 < VIN < VDDP, TA ≤ 105°C | 55 | |
| Input leakage current for P0.11 | IOZP1 | -10 | 1 | µA | 0 < VIN < VDDP, TA ≤ 105°C | 55 | |
| Voltage on any pin during VDDP power off | VPO | 0.3 | V | during VDDP power off | 55 | ||
| Maximum current per pin (excluding P1, VDDP and VSS) | IMP | -10 | 11 | mA | 55 | ||
| Maximum current per high current pins | IMP1A | -10 | 50 | mA | 55 | ||
| Maximum current into VDDP (VQFN64, LQFP64) | IMVDD1 | 520 | mA | 55 | |||
| Maximum current out of VSS (VQFN64, LQFP64) | IMVSS1 | 390 | mA | 55 | |||
| Thermal resistance Junction-Ambient (PG-LQFP-64-26) | RΘJA | 66.7 | K/W | Device mounted on 4-layer JEDEC board (JESD 51-5); exposed pad soldered | 78 | ||
| VDDP prewarning voltage | VDDPPW | 2.1 | 2.25 | 2.4 | V | ANAVDEL.VDEL_SELECT = 00B | 68 |
| VDDP prewarning voltage | VDDPPW | 2.85 | 3 | 3.15 | V | ANAVDEL.VDEL_SELECT = 01B | 68 |
| VDDP prewarning voltage | VDDPPW | 4.2 | 4.4 | 4.6 | V | ANAVDEL.VDEL_SELECT = 10B | 68 |
| VDDP brownout reset voltage | VDDPBO | 1.55 | 1.62 | 1.75 | V | calibrated, before user code starts running | 68 |
| Active mode current, peripherals enabled, 48/96 MHz | IDDPAE | 14.1 | 20 | mA | fMCLK/fPCLK 48/96 MHz; VDDP = 5 V | 63 | |
| Nominal accuracy with adjustment based on XTAL as reference (DCO1) | ΔfLTX | -0.3 | 0.3 | % | with respect to fNOM(typ), over temperature (-40°C to 105°C) | 69 | |
| Accuracy DCO1 (0°C to 85°C) | ΔfLT | -1.7 | 3.4 | % | with respect to fNOM(typ), over temperature (0°C to 85°C) | 69 | |
| Accuracy DCO1 (-40°C to 105°C) | ΔfLT | -3.9 | 4 | % | with respect to fNOM(typ), over temperature (-40°C to 105°C) | 69 | |
| Input frequency (direct input mode) | fOSC | 4 | 48 | MHz | Direct Input Mode | 62 | |
| Input frequency (external crystal mode) | fOSC | 4 | 20 | MHz | External Crystal Mode | 62 | |
| Input voltage at XTAL1 (external crystal mode) | VIX | -0.3 | 1.5 | V | External Crystal Mode | 62 | |
| Input voltage at XTAL1 (direct input mode) | VIX | -0.3 | 5.5 | V | Direct Input Mode | 62 | |
| Input amplitude (peak-to-peak) at XTAL1 | VPPX | 0.6 | 1.7 | V | External Crystal Mode | 62 | |
| Oscillator start-up time | tOSCS | 10 | ms | 62 | |||
| Temperature sensor range | TSR | -40 | 115 | °C | 61 | ||
| Sensor Accuracy | TTSAL | -6 | 6 | °C | TJ > 20°C | 61 | |
| Offset error | EAOFF | -8 | 8 | mV | Calibrated, VDD = 5.0 V | 57 | |
| Gain error with external reference | EAGAIN | -0.5 | 0.5 | % | SHSCFG.AREF = 00B (calibrated) | 57 |
CAD (KiCad official)
- Symbol:
XMC1401F064F0128AAXUMA1 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
xmc1401f064f0128aaxuma1-etched.step/xmc1401f064f0128aaxuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xmc1401f064f0128aaxuma1.step/xmc1401f064f0128aaxuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (85 pp, sha256
c7e2fe2d7b095b51, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).