Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F722A-I

Microchip Tech · MICROCHIP · SSOP-28-208mil

PIC16F722A-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Master Clear with internal pull-up when MCLRE is set, otherwise a general purpose input, and also the programming voltage VPP (HV).
2 RA0/AN0/SS/VCAP bidirectional General purpose I/O with A/D Channel 0 input, SS slave select input (alternate location), and voltage regulator VCAP pin on PIC16F722A/723A only.
3 RA1/AN1 bidirectional General purpose I/O with A/D Channel 1 analog input.
4 RA2/AN2 bidirectional General purpose I/O with A/D Channel 2 analog input.
5 RA3/AN3/VREF bidirectional General purpose I/O with A/D Channel 3 analog input and A/D voltage reference input VREF.
6 RA4/CPS6/T0CKI bidirectional General purpose I/O with capacitive sensing input 6 and Timer0 clock input (Schmitt trigger).
7 RA5/AN4/CPS7/SS/VCAP bidirectional General purpose I/O with A/D Channel 4 input, capacitive sensing input 7, SS slave select input (alternate location), and VCAP on PIC16F722A/723A only.
8 VSS power_in Ground reference.
9 RA7/OSC1/CLKIN bidirectional General purpose I/O; crystal/resonator connection (LP, XT, HS modes), external clock input (EC mode), or RC oscillator connection (RC mode).
10 RA6/OSC2/CLKOUT/VCAP bidirectional General purpose I/O; crystal/resonator connection (LP, XT, HS modes), FOSC/4 clock output, and VCAP on PIC16F722A/723A only.
11 RC0/T1OSO/T1CKI bidirectional General purpose I/O; Timer1 oscillator output and Timer1 clock input.
12 RC1/T1OSI/CCP2 bidirectional General purpose I/O; Timer1 oscillator input and CCP2 capture/compare/PWM (CCP2 may alternatively be on RB3).
13 RC2/CCP1 bidirectional General purpose I/O; Capture 1 input, Compare 1 output, and PWM1 output.
14 RC3/SCK/SCL bidirectional General purpose I/O; SPI clock, or I2C clock (open drain) in I2C mode.
15 RC4/SDI/SDA bidirectional General purpose I/O; SPI data input, or I2C data input/output (open drain).
16 RC5/SDO bidirectional General purpose I/O; SPI data output.
17 RC6/TX/CK bidirectional General purpose I/O; AUSART asynchronous transmit output or synchronous clock.
18 RC7/RX/DT bidirectional General purpose I/O; AUSART asynchronous receive input or synchronous data.
19 VSS power_in Ground reference.
20 VDD power_in Positive supply.
21 RB0/AN12/CPS0/INT bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up; also A/D Channel 12 input, capacitive sensing input 0, and external edge interrupt INT.
22 RB1/AN10/CPS1 bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up; also A/D Channel 10 input and capacitive sensing input 1.
23 RB2/AN8/CPS2 bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up; also A/D Channel 8 input and capacitive sensing input 2.
24 RB3/AN9/CPS3/CCP2 bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up; also A/D Channel 9 input, capacitive sensing input 3, and CCP2 capture/compare/PWM (alternate location RC1).
25 RB4/AN11/CPS4 bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up; also A/D Channel 11 input and capacitive sensing input 4.
26 RB5/AN13/CPS5/T1G bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up; also A/D Channel 13 input, capacitive sensing input 5, and Timer1 gate input.
27 RB6/ICSPCLK/ICDCLK bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up; also In-Circuit Serial Programming clock and In-Circuit Debug clock.
28 RB7/ICSPDAT/ICDDAT bidirectional General purpose I/O with interrupt-on-change and individually enabled pull-up; also ICSP data I/O and In-Circuit Debug data I/O.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Embedded Processors & Controllers
Pins 28

CAD (KiCad official)

  • Symbol: PIC16F722A-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16f722a-i-etched.step / pic16f722a-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f722a-i.step / pic16f722a-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (266 pp, sha256 d3e10d8105bc1424, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF