Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HIN202CBZ

RENESAS · RS232 ICs · SOIC-16-300mil

HIN202CBZ from RENESAS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the external charge-pump capacitor C1, typically 0.1 µF.
2 V+ power_out Internally generated positive supply, nominally +10 V, produced from VCC by the charge pump.
3 C1- passive Negative terminal of the external charge-pump capacitor C1.
4 C2+ passive Positive terminal of the external charge-pump capacitor C2.
5 C2- passive Negative terminal of the external charge-pump capacitor C2.
6 V- power_out Internally generated negative supply, nominally -10 V, produced by the charge-pump voltage inverter.
7 T2OUT output RS-232 transmitter 2 output at nominally ±10 V swing; short-circuit protected and can be shorted to ground indefinitely.
8 R2IN input RS-232 receiver 2 input accepting up to ±30 V, with 3 kΩ to 7 kΩ input impedance and an internal 5 kΩ pull-down to GND.
9 R2OUT output TTL/CMOS receiver 2 output, swinging between GND and VCC.
10 T2IN input TTL/CMOS-compatible transmitter 2 input with an internal 400 kΩ pull-up to VCC; an unused input may be left unconnected.
11 T1IN input TTL/CMOS-compatible transmitter 1 input with an internal 400 kΩ pull-up to VCC; an unused input may be left unconnected.
12 R1OUT output TTL/CMOS receiver 1 output, swinging between GND and VCC.
13 R1IN input RS-232 receiver 1 input accepting up to ±30 V, with 3 kΩ to 7 kΩ input impedance and an internal 5 kΩ pull-down to GND.
14 T1OUT output RS-232 transmitter 1 output at nominally ±10 V swing; short-circuit protected and can be shorted to ground indefinitely.
15 GND power_in Ground lead, connect to 0 V.
16 VCC power_in Power supply input, 5 V ±10% (HIN202).

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-16-300mil
Category Communication Interface Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Current ICC 8 15 mA No Load, TA = 25°C (HIN202) 7
Supply voltage tolerance (VCC = 5V) VCC -10 10 % VCC = +5V 10% (HIN207 is 5%) 7
Input Logic Low VIL 0.8 V TIN, EN, SD, EN, SD 7
Input Logic High (TIN) VIH 2 V TIN 7
Input Logic High (EN, SD) VIH 2.4 V EN, SD, EN, SD 7
Transmitter Input Pullup Current IP 15 200 µA TIN = 0V 7
TTL/CMOS Receiver Output Voltage Low VOL 0.1 0.4 V IOUT = 3.2mA (HIN202) 7
TTL/CMOS Receiver Output Voltage High VOH 3.5 4.6 V IOUT = -1mA 7
TTL/CMOS Receiver Output Leakage 0.05 10 µA EN = VCC, EN = 0, 0V < ROUT < VCC 7
RS-232 Input Voltage Range VIN -30 30 V 7
Receiver Input Impedance RIN 3 5 7 kΩ TA = 25°C, VIN = 3V 7
Receiver Input Low Threshold (Active Mode) VIN (H-L) 0.8 1.2 V VCC = 5V, TA = 25°C, Active Mode 7
Receiver Input High Threshold (Active Mode) VIN (L-H) 1.7 2.4 V VCC = 5V, TA = 25°C, Active Mode 7
Receiver Input Hysteresis VHYST 0.2 0.5 1 V VCC = 5V, no hysteresis in shutdown mode 7
Baud Rate, 1 Transmitter Switching 120 kbps RL = 3k 8
Transmitter, Receiver Propagation Delay tPD 0.5 10 µs HIN202, HIN206, HIN207, HIN208, HIN211 8
Transition Region Slew Rate SRT 3 30 V/µs RL = 3k, CL = 2500pF, measured from +3V to -3V or -3V to +3V, 1 Transmitter Switching (Note 2) 8
Output Voltage Swing, TOUT TOUT 5 9 10 V Transmitter Outputs, 3k to Ground 8
Output Resistance, TOUT TOUT 300 Ω VCC = V+ = V- = 0V, VOUT = 2V 8
RS-232 Output Short Circuit Current ISC 10 mA TOUT shorted to GND 8
VCC to Ground VCC -0.3 6 V Referenced to GND: (GND -0.3V) < VCC < 6V 7
V+ to Ground V+ 12 V (VCC -0.3V) < V+ < 12V 7
V- to Ground V- -12 V -12V < V- < (GND +0.3V) 7
RIN input voltage RIN 30 V Printed as 30V 7
TIN input voltage TIN -0.3 V -0.3V < VIN < (V+ +0.3V) 7
ROUT output voltage ROUT -0.3 V (GND -0.3V) < VRXOUT < (V+ +0.3V) 7
Operating temperature range 0 70 °C HIN2XXCX (HIN202CBZ commercial grade) 7
Thermal resistance, junction to ambient, 16 Ld SOIC (W) θJA 100 °C/W Typical, Note 1: component mounted on low effective thermal conductivity test board in free air 7
Maximum Junction Temperature (Plastic Package) 150 °C 7
Maximum Storage Temperature Range -65 150 °C 7
Maximum Lead Temperature (Soldering) 300 °C Soldering 10s (SOIC and SSOP, lead tips only) 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin C2- External capacitor (- terminal) is connected to this lead. TIN Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kpull-up resistor to VCC is connected to each lead. 3

CAD (KiCad official)

  • Symbol: HIN202CBZ
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: hin202cbz-etched.step / hin202cbz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hin202cbz.step / hin202cbz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (20 pp, sha256 2589abb4fe7ec19d, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF