component
NCP170AXV210T2G
Public Made by Adomby adom
onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP170AXV210T2G
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-563
NCP170AXV210T2G from onsemi, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power supply input voltage; operating input range is 2.2 V to 5.5 V and the absolute maximum input voltage is 6.0 V. |
| 2 | GND | power_in | Power supply ground. |
| 3 | OUT | power_out | Regulated output pin; the output voltage is rated −0.3 V to VIN + 0.3 V, and COUT of at least 1.0 µF should be placed as close to this pin as possible. |
| 4 | NC | unconnected | No connect. |
| 5 | GND | power_in | Power supply ground; the SOT-563 table lists this as a second ground pin in addition to pin 2. |
| 6 | EN | input | Chip enable (active high): the device is disabled when EN is below 0.4 V and enabled when EN is above 1.2 V, with an absolute maximum of 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-563 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 6 | V | Note 1 | 2 | ||
| Output Voltage | VOUT | -0.3 | V | Upper limit printed as VIN + 0.3 V | 2 | ||
| Chip Enable Input | VCE | -0.3 | 6 | V | 2 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 2 | ||
| ESD Capability, Human Body Model | ESDHBM | 2000 | V | Tested per AEC-Q100-002 (EIA/JESD22-A114) | 2 | ||
| ESD Capability, Machine Model | ESDMM | 200 | V | Tested per AEC-Q100-003 (EIA/JESD22-A115) | 2 | ||
| Thermal Resistance, Junction-to-Air, SOT-563 | RJA | 200 | °C/W | SOT-563 package | 2 |
CAD (KiCad official)
- Symbol:
NCP170AXV210T2G - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
ncp170axv210t2g-etched.step/ncp170axv210t2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp170axv210t2g.step/ncp170axv210t2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (26 pp, sha256
90144f6bdd5bed12, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).