component
XT25F04BSOIGT
Public Made by Adomby adom
XTX NOR FLASH, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXT25F04BSOIGT
XTX · NOR FLASH · SOP-8
XT25F04BSOIGT from XTX, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select Input for the serial interface. |
| 2 | SO (IO1) | output | Data Output; IO1 in dual SPI mode. |
| 3 | NC | unconnected | Labeled NC in the connection diagram; the datasheet gives no function for this pin. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | SI (IO0) | input | Data Input; IO0 in dual SPI mode. |
| 6 | SCLK | input | Serial Clock Input; SPI clock frequency of up to 120MHz is supported for fast read command. |
| 7 | NC | unconnected | Labeled NC in the connection diagram; the datasheet gives no function for this pin. |
| 8 | VCC | power_in | Power Supply; full voltage range is 2.7 to 3.6V per the datasheet features list. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XTX |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Leakage Current | ILI | -2 | 2 | μA | 20 | ||
| Output Leakage Current | ILO | -2 | 2 | μA | 20 | ||
| Standby Current | ICC1 | 1 | 5 | μA | CS#=VCC; VIN=VCC or VSS | 20 | |
| Operating Current (Read) | ICC3 | 15 | 20 | mA | CLK=0.1VCC/0.9VCC at 120MHz for Fast Read | 20 | |
| Operating Current (Read) | ICC3 | 13 | 18 | mA | CLK=0.1VCC/0.9VCC at 40MHz for Read | 20 | |
| Operating Current (PP) | ICC4 | 20 | mA | CS#=VCC | 20 | ||
| Operating Current (WRSR) | ICC5 | 20 | mA | CS#=VCC | 20 | ||
| Operating Current (SE) | ICC6 | 20 | mA | CS#=VCC | 20 | ||
| Operating Current (BE) | ICC7 | 20 | mA | CS#=VCC | 20 | ||
| Input Low Voltage | VIL | -0.5 | V | 20 | |||
| Output Low Voltage | VOL | 0.4 | V | IOL=1.6mA | 20 | ||
| VCC(min) To CS# Low | tVSL | 10 | us | 18 | |||
| Time Delay Before Write Instruction | tPUW | 1 | ms | 18 | |||
| Write Inhibit Voltage | VWI | 1.5 | 2.5 | V | 18 | ||
| Ambient Operating Temperature | -40 | 85 | ℃ | 19 | |||
| Storage Temperature | -65 | 150 | ℃ | 19 | |||
| Output Short Circuit Current | 200 | mA | 19 | ||||
| Applied Input/Output Voltage | -0.5 | 4 | V | 19 | |||
| VCC | VCC | -0.5 | 4 | V | 19 | ||
| Input Capacitance | CIN | 6 | pF | VIN=0V | 19 | ||
| Output Capacitance | COUT | 8 | pF | VOUT=0V | 19 | ||
| Serial Clock Frequency For Fast Read (0BH) | fC | 120 | MHz | 21 | |||
| Serial Clock Frequency For Read (03H) | fR | 40 | MHz | 21 | |||
| Serial Clock High Time | tCLH | 4 | ns | 21 | |||
| Serial Clock Low Time | tCLL | 4 | ns | 21 | |||
| Serial Clock Rise Time (Slew Rate) | tCLCH | 0.2 | V/ns | 21 | |||
| Serial Clock Fall Time (Slew Rate) | tCHCL | 0.2 | V/ns | 21 | |||
| CS# Active Setup Time | tSLCH | 5 | ns | 21 | |||
| CS# Active Hold Time | tCHSH | 5 | ns | 21 | |||
| CS# Not Active Setup Time | tSHCH | 5 | ns | 21 | |||
| CS# Not Active Hold Time | tCHSL | 5 | ns | 21 | |||
| CS# High Time (read/write) | tSHSL | 20 | ns | 21 | |||
| Output Disable Time | tSHQZ | 6 | ns | 21 | |||
| Output Hold Time | tCLQX | 1 | ns | 21 | |||
| Data In Setup Time | tDVCH | 2 | ns | 21 | |||
| Data In Hold Time | tCHDX | 2 | ns | 21 | |||
| Hold# Low Setup Time (relative to Clock) | tHLCH | 5 | ns | 21 | |||
| Hold# High Setup Time (relative to Clock) | tHHCH | 5 | ns | 21 | |||
| Hold# High Hold Time (relative to Clock) | tCHHL | 5 | ns | 21 | |||
| Hold# Low Hold Time (relative to Clock) | tCHHH | 5 | ns | 21 | |||
| Hold# Low To High-Z Output | tHLQZ | 6 | ns | 21 | |||
| Hold# Low To Low-Z Output | tHHQX | 6 | ns | 21 | |||
| Clock Low To Output Valid | tCLQV | 6.5 | ns | 21 | |||
| Write Protect Setup Time Before CS# Low | tWHSL | 20 | ns | 21 | |||
| Write Protect Hold Time After CS# High | tSHWL | 100 | ns | 21 | |||
| CS# High To Standby Mode With Electronic Signature Read | tRES2 | 0.1 | us | 21 | |||
| Write Status Register Cycle Time | tW | 100 | 200 | ms | 21 | ||
| Page Programming Time | tPP | 1.5 | 5 | ms | 21 | ||
| Sector Erase Time | tSE | 120 | 300 | ms | 21 | ||
| Block Erase Time | tBE | 0.8 | 1.5 | s | 21 | ||
| Chip Erase Time | tCE | 6 | 10 | s | 21 |
CAD (KiCad official)
- Symbol:
XT25F04BSOIGT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
xt25f04bsoigt-etched.step/xt25f04bsoigt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xt25f04bsoigt.step/xt25f04bsoigt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XTX datasheet (29 pp, sha256
01f27c8021793226, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).