Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM25010MHX

Texas Instruments · DC-DC Converters · HTSSOP-14-EP

LM25010MHX from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection; can be connected to ground plane to improve heat dissipation.
2 SW output Switching node internally connected to buck switch source; connect to inductor, free-wheeling diode, and bootstrap capacitor.
3 BST input Bootstrap pin for bootstrap capacitor; capacitor charged from VCC through internal diode during buck switch OFF-time.
4 ISEN input Current sense input; inductor current flows through internal sense resistor during OFF-time with current limit threshold at 1.25 A typical.
5 SGND power_in Current sense ground; recirculating current flows into this pin to the internal current sense resistor.
6 RTN power_in Ground return for all internal circuitry other than the current sense resistor.
7 NC unconnected No internal connection; can be connected to ground plane to improve heat dissipation.
8 NC unconnected No internal connection.
9 FB input Voltage feedback input from regulated output to regulation and overvoltage comparators with 2.5 V regulation threshold.
10 SS input Soft start input; internal 11.5 µA current source charges SS capacitor to 2.5 V for gradual output voltage rise.
11 RON/SD input ON-time control and shutdown; external resistor from VIN sets buck switch ON-time; grounding this pin shuts down regulator.
12 VCC power_out Bias regulator output nominally equal to VIN for VIN < 8.9 V and regulated at 7 V for VIN > 8.9 V; connect 0.47 µF minimum capacitor to ground.
13 VIN power_in Input supply with nominal range 6 V to 42 V; input bypass capacitors located close to VIN and RTN pins.
14 NC unconnected No internal connection.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category Power Supply Chip
Pins 15

CAD (KiCad official)

  • Symbol: LM25010MHX
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: lm25010mhx-etched.step / lm25010mhx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm25010mhx.step / lm25010mhx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 d5d36a8196d36262, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF