component
LT2078CS8#PBF
Public Made by Adomby adom
Analog Devices Precision OpAmps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT2078CS8#PBF
Analog Devices · Precision OpAmps · SOP-8
LT2078CS8#PBF from Analog Devices, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output, which sources and sinks 5mA load current and swings to within a few millivolts of ground while sinking current. |
| 2 | -IN A | input | Amplifier A inverting input; input range includes ground and is protected by series resistors even when 5V below ground. |
| 3 | +IN A | input | Amplifier A non-inverting input; input range includes ground and is protected by series resistors even when 5V below ground. |
| 4 | V- | power_in | Negative supply, 0V (ground) for single-supply operation, with total supply up to ±22V absolute maximum. |
| 5 | +IN B | input | Amplifier B non-inverting input; input range includes ground and is protected by series resistors even when 5V below ground. |
| 6 | -IN B | input | Amplifier B inverting input; input range includes ground and is protected by series resistors even when 5V below ground. |
| 7 | OUT B | output | Amplifier B output, which sources and sinks 5mA load current and swings to within a few millivolts of ground while sinking current. |
| 8 | V+ | power_in | Positive supply, fully specified at 5V with 2.3V maximum minimum-supply voltage, and may be bypassed with about 0.1µF for faster settling. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | -22 | 22 | V | 2 | |||
| Differential Input Voltage | -30 | 30 | V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Specified Temperature Range Commercial | 0 | 70 | °C | Commercial | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance Junction to Ambient | θJA | 190 | °C/W | 8-lead SO (assumed first value) | 2 | ||
| Input Offset Voltage | VOS | 40 | 120 | µV | VS = 5V, 0V, VCM = 0.1V, VO = 1.4V, TA = 25°C; LT2078 | 2 | |
| Input Offset Current | IOS | 0.05 | 0.35 | nA | VS = 5V, 0V, TA = 25°C | 2 | |
| Input Bias Current | IB | 6 | 10 | nA | VS = 5V, 0V, TA = 25°C | 2 | |
| Input Resistance Differential Mode | 300 | 800 | MΩ | VS = 5V, 0V, TA = 25°C (Note 4) | 2 | ||
| Input Voltage Range High | 3.5 | 3.8 | V | VS = 5V, 0V, TA = 25°C | 2 | ||
| Common Mode Rejection Ratio | CMRR | 92 | 108 | dB | VCM = 0V to 3.5V, VS = 5V, 0V, TA = 25°C | 2 | |
| Power Supply Rejection Ratio | PSRR | 98 | 114 | dB | VS = 2.3V to 12V, TA = 25°C | 2 | |
| Large-Signal Voltage Gain | AVOL | 150 | 1000 | V/mV | VO = 0.03V to 4V, No Load, VS = 5V, 0V, TA = 25°C | 3 | |
| Large-Signal Voltage Gain | AVOL | 120 | 600 | V/mV | VO = 0.03V to 3.5V, RL = 50k, VS = 5V, 0V, TA = 25°C | 3 | |
| Maximum Output Voltage Swing Output Low | 3.5 | 6 | mV | Output Low, No Load, VS = 5V, 0V, TA = 25°C | 3 | ||
| Maximum Output Voltage Swing Output Low | 0.55 | 1.2 | mV | Output Low, 2k to GND, TA = 25°C | 3 | ||
| Maximum Output Voltage Swing Output Low | 95 | 130 | mV | Output Low, ISINK = 100µA, TA = 25°C | 3 | ||
| Maximum Output Voltage Swing Output High | 4.2 | 4.4 | V | Output High, No Load, TA = 25°C | 3 | ||
| Maximum Output Voltage Swing Output High | 3.5 | 3.9 | V | Output High, 2k to GND, TA = 25°C | 3 | ||
| Slew Rate | SR | 0.04 | 0.07 | V/µs | AV = 1, VS = ±2.5V | 3 | |
| Supply Current per Amplifier | IS | 39 | 55 | µA | VS = 5V, 0V, TA = 25°C | 3 | |
| Minimum Supply Voltage | 2.2 | 2.3 | V | Note 5 | 3 | ||
| Input Offset Voltage | VOS | 60 | 240 | µV | VS = 5V, 0V, 0°C ≤ TA ≤ 70°C; LT2078 | 3 | |
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.5 | 2.5 | µV/°C | VS = 5V, 0V, 0°C ≤ TA ≤ 70°C; LT2078 (Note 6) | 3 | |
| Input Offset Current | IOS | 0.06 | 0.5 | nA | VS = 5V, 0V, 0°C ≤ TA ≤ 70°C | 3 | |
| Input Bias Current | IB | 6 | 11 | nA | VS = 5V, 0V, 0°C ≤ TA ≤ 70°C | 3 | |
| Common Mode Rejection Ratio | CMRR | 88 | 106 | dB | VCM = 0V to 3.4V, 0°C ≤ TA ≤ 70°C | 3 | |
| Power Supply Rejection Ratio | PSRR | 95 | 112 | dB | VS = 2.6V to 12V, 0°C ≤ TA ≤ 70°C | 3 | |
| Large-Signal Voltage Gain | AVOL | 110 | 750 | V/mV | VO = 0.05V to 4V, No Load, VS = 5V, 0V, 0°C ≤ TA ≤ 70°C | 4 | |
| Large-Signal Voltage Gain | AVOL | 80 | 500 | V/mV | VO = 0.05V to 3.5V, RL = 50k, 0°C ≤ TA ≤ 70°C | 4 | |
| Maximum Output Voltage Swing Output Low | 4 | 7 | mV | Output Low, No Load, 0°C ≤ TA ≤ 70°C | 4 | ||
| Maximum Output Voltage Swing Output Low | 105 | 150 | mV | Output Low, ISINK = 100µA, 0°C ≤ TA ≤ 70°C | 4 | ||
| Maximum Output Voltage Swing Output High | 4.1 | 4.3 | V | Output High, No Load, 0°C ≤ TA ≤ 70°C | 4 | ||
| Maximum Output Voltage Swing Output High | 3.3 | 3.8 | V | Output High, 2k to GND, 0°C ≤ TA ≤ 70°C | 4 | ||
| Supply Current per Amplifier | IS | 42 | 63 | µA | VS = 5V, 0V, 0°C ≤ TA ≤ 70°C | 4 | |
| Input Offset Voltage | VOS | 70 | 350 | µV | VS = ±15V, TA = 25°C; LT2078 | 4 | |
| Input Offset Current | IOS | 0.05 | 0.35 | nA | VS = ±15V, TA = 25°C | 4 | |
| Input Bias Current | IB | 6 | 10 | nA | VS = ±15V, TA = 25°C | 4 | |
| Input Voltage Range High | 13.5 | 13.8 | V | VS = ±15V, TA = 25°C | 4 | ||
| Input Voltage Range Low | -15.3 | -15 | V | VS = ±15V, TA = 25°C | 4 | ||
| Common Mode Rejection Ratio | CMRR | 95 | 114 | dB | VCM = 13.5V, -15V, VS = ±15V, TA = 25°C | 4 | |
| Power Supply Rejection Ratio | PSRR | 98 | 114 | dB | VS = 5V, 0V to ±18V, TA = 25°C | 4 | |
| Large-Signal Voltage Gain | AVOL | 1000 | 5000 | V/mV | VO = ±10V, RL = 50k, VS = ±15V, TA = 25°C | 4 | |
| Large-Signal Voltage Gain | AVOL | 300 | 1100 | V/mV | VO = ±10V, RL = 2k, VS = ±15V, TA = 25°C | 4 | |
| Maximum Output Voltage Swing | VOUT | 13 | 14 | V | RL = 50k, VS = ±15V, TA = 25°C (printed ±) | 4 | |
| Maximum Output Voltage Swing | VOUT | 11 | 13.2 | V | RL = 2k, VS = ±15V, TA = 25°C (printed ±) | 4 | |
| Slew Rate | SR | 0.06 | 0.1 | V/µs | VS = ±15V, TA = 25°C | 4 | |
| Supply Current per Amplifier | IS | 47 | 75 | µA | VS = ±15V, TA = 25°C | 4 | |
| Input Offset Voltage | VOS | 90 | 460 | µV | VS = ±15V, 0°C ≤ TA ≤ 70°C; LT2078 | 5 | |
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.6 | 2.5 | µV/°C | VS = ±15V, 0°C ≤ TA ≤ 70°C; LT2078 (Note 6) | 5 | |
| Input Offset Current | IOS | 0.06 | 0.5 | nA | VS = ±15V, 0°C ≤ TA ≤ 70°C | 5 | |
| Input Bias Current | IB | 6 | 11 | nA | VS = ±15V, 0°C ≤ TA ≤ 70°C | 5 | |
| Large-Signal Voltage Gain | AVOL | 250 | 1200 | V/mV | VO = ±10V, RL = 5k, VS = ±15V, 0°C ≤ TA ≤ 70°C | 5 | |
| Common Mode Rejection Ratio | CMRR | 92 | 112 | dB | VCM = 13V, -15V, VS = ±15V, 0°C ≤ TA ≤ 70°C | 5 | |
| Power Supply Rejection Ratio | PSRR | 95 | 112 | dB | VS = 5V, 0V to ±18V, 0°C ≤ TA ≤ 70°C | 5 | |
| Maximum Output Voltage Swing | 11 | 13.6 | V | RL = 5k, VS = ±15V, 0°C ≤ TA ≤ 70°C (printed ±) | 5 | ||
| Supply Current per Amplifier | IS | 50 | 85 | µA | VS = ±15V, 0°C ≤ TA ≤ 70°C | 5 | |
| Gain Bandwidth Product | GBW | 200 | kHz | fO ≤ 20kHz, VS = 5V, 0V, TA = 25°C | 3 | ||
| Channel Separation | 110 | dB | ΔVIN = 3V, RL = 10k, f ≤ 10Hz | 3 | |||
| Input Noise Voltage | en | 0.6 | µVP-P | 0.1Hz to 10Hz (Note 3) | 2 | ||
| Input Noise Current | in | 2.3 | pAP-P | 0.1Hz to 10Hz (Note 3) | 2 |
CAD (KiCad official)
- Symbol:
LT2078CS8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt2078cs8-pbf-etched.step/lt2078cs8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt2078cs8-pbf.step/lt2078cs8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
2ef6503995de8464, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).