component
UC285TDKTTT-ADJ
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownUC285TDKTTT-ADJ
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-5
UC285TDKTTT-ADJ from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VB | power_in | Supplies power to all circuits of the regulator except the output power transistor, and needs at least 2 V of headroom above VOUT (VB dropout 1.8 V to 2.2 V at 5 A); VB absolute maximum is 13 V. |
| 2 | VIN | power_in | Supplies current only to the collector of the output power transistor, with maximum dropout of 490 mV at 5 A for TJ = 0°C to 100°C (500 mV over the UC285 range); VIN absolute maximum is 7.5 V. |
| 3 | GND | power_in | Should be referenced to the load ground for accurate results; the tab is also ground. |
| 4 | ADJ | input | In the adjustable version the output is programmed by two external 0.1% resistors that must satisfy R3 |
| 5 | VOUT | power_out | Connect to the load through a low-impedance path, and decouple with at least 100 µF of high-quality tantalum or OSCON capacitance close to this pin for maximum stability. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
UC285TDKTTT-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
uc285tdkttt-adj-etched.step/uc285tdkttt-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);uc285tdkttt-adj.step/uc285tdkttt-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
46b27cc669e96326, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).