3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP3150-G
miracle · Gate Drive Optocoupler · DIP-8
MP3150-G from miracle, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | ANODE | input | LED anode input; recommended input current IF(ON) is 7 to 16 mA, absolute maximum forward current 25 mA. |
| 3 | CATHODE | input | LED cathode input; reverse voltage limited to 5 V maximum. |
| 4 | NC | unconnected | No internal connection. |
| 5 | VSS | power_in | Output-side negative supply/ground reference; VDD-VSS recommended 15 to 30 V, absolute maximum 35 V. |
| 6 | VO1 | output | Gate drive output (shown on schematic as VO1, connected to the output stage midpoint); peak output current 0.8 A maximum. |
| 7 | VO2 | output | Gate drive output (shown on schematic as VO2, the upper output stage); peak output current 0.8 A maximum. |
| 8 | VDD | power_in | Positive output-side supply; VDD-VSS recommended 15 to 30 V, absolute maximum 35 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | miracle |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward Current | IF | 25 | mA | 2 | |||
| Peak Forward Current | IFP | 50 | mA | Note 1: 50% duty, 1ms P.W | 2 | ||
| Peak Transient Current | IF(trans) | 1 | A | Note 2: ≤1μs P.W, 300pps | 2 | ||
| Operating Frequency | f | 50 | kHz | 2 | |||
| Reverse Voltage | VR | 5 | V | 2 | |||
| Input Power Dissipation | PI | 100 | mW | 2 | |||
| Supply Voltage | VDD-VSS | 35 | V | 2 | |||
| Peak Output Current | IO | 0.8 | A | 2 | |||
| Output Power Dissipation | PO | 250 | mW | 2 | |||
| Total Power Dissipation | Ptot | 295 | mW | 2 | |||
| Isolation Voltage | Viso | 5000 | Vrms | Note 3: AC For 1 Minute, R.H. = 40 ~ 60% | 2 | ||
| Operating Temperature | Topr | -40 | 110 | °C | 2 | ||
| Storage Temperature | Tstg | -55 | 150 | °C | 2 | ||
| Soldering Temperature | Tsol | 260 | °C | Note 4: For 10 seconds | 2 | ||
| Operating Temperature | TA | -40 | 100 | °C | 3 | ||
| Supply Voltage | VDD-VSS | 15 | 30 | V | 3 | ||
| Input Current (ON) | IF(ON) | 7 | 16 | mA | 3 | ||
| Input Voltage (OFF) | VF(OFF) | 0 | 0.8 | V | 3 | ||
| Forward Voltage | VF | 1.36 | 1.8 | V | IF=10mA | 3 | |
| Reverse Current | IR | 10 | μA | VR=5V | 3 | ||
| Input Threshold Current | IFLH | 2.2 | 5 | mA | IO= 0mA, VO> 5V | 3 | |
| Input Threshold Voltage | VFHL | 0.8 | 1.2 | V | IO= 0mA, VO< 5V | 3 | |
| High Level Supply Current | IDDH | 1.6 | 3 | mA | IF= 10mA, VO= Open | 3 | |
| Low Level Supply Current | IDDL | 2 | 3 | mA | VF= 0V, VO= Open | 3 | |
| High Level Output Current | IOH | -0.3 | A | VO= VDD-2.0V | 3 | ||
| High Level Output Current | IOH | -0.8 | A | VO= VDD-4.0V | 3 | ||
| Low Level Output Current | IOL | 0.3 | A | VO= VSS+1.5V | 3 | ||
| Low Level Output Current | IOL | 0.8 | A | VO= VSS+2.5V | 3 | ||
| Under Voltage Lockout Threshold | VUVLO+ | 11 | 12.5 | 13.5 | V | IO= 10mA, VO> 5V | 3 |
| Under Voltage Lockout Threshold | VUVLO- | 9.5 | 11 | 12 | V | IO= 10mA, VO< 5V | 3 |
| Propagation Delay Time to Output Low Level | TPHL | 50 | 130 | 250 | ns | IF=10mA, Cg= 1nF, Rg= 20Ω, f= 10kHz, Duty = 50%, TA= 25℃ | 4 |
| Propagation Delay Time to Output High Level | TPLH | 50 | 90 | 250 | ns | IF=10mA, Cg= 1nF, Rg= 20Ω, f= 10kHz, Duty = 50%, TA= 25℃ | 4 |
| Pulse Width Distortion | PWD | 40 | 200 | ns | 4 | ||
| Propagation Delay Difference Between Any Two Parts | PDD | -200 | 200 | 4 | |||
| Common Mode Transient Immunity at Logic High | /CMH/ | 20 | kV/μs | IF=10mA,VDD=30V, TA=25℃,VCM= 2kV | 4 | ||
| Common Mode Transient Immunity at Logic Low | /CML/ | 20 | kV/μs | IF=0mA,VDD=30V, TA= 25℃, VCM= 2kV | 4 |
CAD (KiCad official)
- Symbol:
MP3150-G - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
mp3150-g-etched.step/mp3150-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp3150-g.step/mp3150-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: miracle datasheet (20 pp, sha256
db360920880a8b3a, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).