3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownRS8412XK
Jiangsu RUNIC Tech · Operational Amplifier · SOP-8
RS8412XK from Jiangsu RUNIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output, channel A. Rail-to-rail output stage, short-circuit current ~70mA, drives capacitive loads up to 100pF. |
| 2 | -INA | input | Inverting input, channel A. Diode-clamped to supply rails; keep input current below ±10mA. Common-mode range extends from (V-)-0.1V to (V+)-2V. |
| 3 | +INA | input | Noninverting input, channel A. Diode-clamped to supply rails; keep input current below ±10mA. Common-mode range extends from (V-)-0.1V to (V+)-2V. |
| 4 | V- | power_in | Negative (lowest) power supply pin, or ground for single-supply operation. Total supply Vs=(V+)-(V-) may range from 3V to 36V (single) or ±1.5V to ±18V (dual). |
| 5 | +INB | input | Noninverting input, channel B. Diode-clamped to supply rails; keep input current below ±10mA. Common-mode range extends from (V-)-0.1V to (V+)-2V. |
| 6 | -INB | input | Inverting input, channel B. Diode-clamped to supply rails; keep input current below ±10mA. Common-mode range extends from (V-)-0.1V to (V+)-2V. |
| 7 | OUTB | output | Output, channel B. Rail-to-rail output stage, short-circuit current ~70mA, drives capacitive loads up to 100pF. |
| 8 | V+ | power_in | Positive (highest) power supply pin. Total supply Vs=(V+)-(V-) may range from 3V to 36V (single) or ±1.5V to ±18V (dual). PSRR typical 120dB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
RS8412XKRS8412XKXMRS8412XKXFRS8412XKBXFRS8412XKXPRS8412XKXQ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, single-supply (recommended) | Vs | 3 | 36 | V | Single supply, Vs=(V+)-(V-) | 6 | |
| Supply voltage, dual-supply (recommended) | Vs | 1.5 | 18 | V | Dual supply, printed as ±1.5 to ±18 | 6 | |
| Supply voltage (absolute maximum) | Vs | -0.7 | 36 | V | Vs=(V+)-(V-) | 6 | |
| Signal input current | -10 | 10 | mA | Signal input pin | 6 | ||
| Signal output current | -100 | 100 | mA | Signal output pin | 6 | ||
| Operating free-air temperature range | TA | -40 | 125 | °C | 6 | ||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 6 | ||
| ESD, human-body model | V(ESD) | -5000 | 5000 | V | Human-body model (HBM), printed as ±5000 | 6 | |
| ESD, machine model | V(ESD) | -200 | 200 | V | Machine model (MM), printed as ±200 | 6 | |
| Input offset voltage | Vos | -4 | 0.8 | 4 | mV | 25C, VCM=VS/2 | 8 |
| Input offset voltage over temperature | Vos | -1.1 | 1.1 | mV | -40C to 125C, printed as ±1.1 | 8 | |
| Quiescent current per amplifier | IQ | 100 | 200 | uA | 25C, Vs=±2.5V, Io=0mA | 8 | |
| Quiescent current per amplifier | IQ | 150 | 300 | uA | 25C, Vs=±18V, Io=0mA | 8 | |
| Power-supply rejection ratio | PSRR | 98 | 120 | dB | 25C, Vs=5V to 36V | 8 | |
| Input bias current | IB | 10 | 60 | pA | 25C, VCM=0V | 8 | |
| Input bias current over temperature | IB | 600 | pA | -40C to 125C, VCM=0V | 8 | ||
| Input offset current | IOS | 10 | 60 | pA | 25C, VCM=0V | 8 | |
| Input offset current over temperature | IOS | 600 | pA | -40C to 125C, VCM=0V | 8 | ||
| Common-mode rejection ratio | CMRR | 70 | 110 | dB | 25C, Vs=±2.5V, VCM=(V-)-0.1V to (V+)-2V | 8 | |
| Common-mode rejection ratio | CMRR | 70 | dB | 25C, Vs=±18V, VCM=(V-)-0.1V to (V+)-2V | 8 | ||
| Open-loop voltage gain | AOL | 92 | 115 | dB | 25C, RL=10kΩ, Vo=(V-)-0.6V to (V+)-0.6V | 8 | |
| Output voltage swing high | VOH | 17.85 | V | 25C, Vs=±18V, RL=10kΩ | 8 | ||
| Output voltage swing low | VOL | -17.85 | V | 25C, Vs=±18V, RL=10kΩ | 8 | ||
| Short-circuit current | ISC | 70 | mA | 25C, VS=36V, Vo=0V | 8 | ||
| Capacitive load drive | CLOAD | 100 | pF | 25C | 8 | ||
| Input offset voltage drift | Vos Tc | 3 | uV/C | -40C to 125C | 8 | ||
| Slew rate | SR | 0.67 | V/us | 25C, G=+1, CL=100pF | 8 | ||
| Gain-bandwidth product | GBW | 1.2 | MHz | 25C | 8 | ||
| Setting time, 0.01% | ts | 5 | us | 25C, VS=±2.5V, G=+1, CL=100pF, step=2V | 8 | ||
| Overload recovery time | tOR | 5 | us | 25C, VIN·Gain≥VS, G=11 | 8 | ||
| Turn-on time | tON | 10 | us | 25C | 8 | ||
| Input voltage noise, 0.1 Hz to 10 Hz | En | 16 | uVpp | 25C, f=0.1Hz to 10Hz, Vs=±2.5V | 8 | ||
| Operating voltage range | Vs | 3 | 36 | V | 25C | 8 | |
| Junction-to-ambient thermal resistance (SOIC-8) | RθJA | 124.7 | °C/W | SOIC-8 column | 6 | ||
| Junction-to-case (top) thermal resistance (SOIC-8) | RθJC(top) | 66.9 | °C/W | SOIC-8 column | 6 | ||
| Junction-to-board thermal resistance (SOIC-8) | RθJB | 67.9 | °C/W | SOIC-8 column | 6 | ||
| Junction-to-top characterization parameter (SOIC-8) | ΨJT | 19.2 | °C/W | SOIC-8 column | 6 | ||
| Junction-to-board characterization parameter (SOIC-8) | ΨJB | 67.2 | °C/W | SOIC-8 column | 6 |
CAD (KiCad official)
- Symbol:
RS8412XK - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
rs8412xk-etched.step/rs8412xk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8412xk.step/rs8412xk.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
rs8412xk.step |
122 KB | You want the bare part, or you mark your own boards. |
rs8412xk-etched.step |
1.9 MB | You want the part with RS8412XK already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 465 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (15 pp, sha256
693df6c829f35f69, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).