component

XC6118N08AMR-G

Public Made by Adom

by adom

Torex Semicon Supervisor and Reset ICs, SOT-25. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmicxc6118n08amr-g
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

XC6118N08AMR-G

Torex Semicon · Supervisor and Reset ICs · SOT-25

XC6118N08AMR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Detector output. N-channel open-drain (XC6118N variant) that pulls low when VSEN falls below the detect voltage (0.8V). Requires an external pull-up resistor. Max output current 10mA.
2 VSS power_in Ground reference for the device.
3 VIN power_in Device supply input. Operating range 1.0V to 6.0V; absolute max 7.0V referenced to VSS.
4 VSEN input Sense input. Voltage on this pin is compared against the internal detect threshold (VDF). Separated from VIN so the IC can monitor an independent supply rail even when the monitored rail drops to 0V.
5 Cd passive Delay capacitance pin. An external capacitor connected between Cd and VSS sets the release delay time after VSEN returns above threshold. If the delay function is unused, leave Cd open. Sink current typ. 200µA; threshold voltage typ. 0.5V.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-25
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • XC6118N08AMR-G
  • XC6118N08AMR-GGR-G

CAD (KiCad official)

  • Symbol: XC6118N08AMR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25 (KiCad packages3D, STEP)
  • 3D model files: xc6118n08amr-g-etched.step / xc6118n08amr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc6118n08amr-g.step / xc6118n08amr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (20 pp, sha256 af598da6ee326c9e, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF