Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MD7218E50SF4

Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · ESOP-8

MD7218E50SF4 from Shanghai Mingda Microelectronics, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Regulated 5.0V output (MD7218E50) delivering up to 1A maximum output current, with a 2.2uF low-ESR ceramic output capacitor and VOUT not allowed to exceed VIN+0.3V.
2 NC unconnected No internal connection.
3 NC unconnected No internal connection.
4 EN input Enable input, active high: VENH 1.5V to 18V turns the output on, VENL 0V to 0.5V shuts it down.
5 GND power_in Ground reference for the regulator.
6 NC unconnected No internal connection.
7 NC unconnected No internal connection.
8 VIN power_in Supply input, operating range 2.2V to 18V (absolute maximum 20V), with a 2.2uF input capacitor placed close to the IC.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Shanghai Mingda Microelectronics
Package ESOP-8
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (±2%, 5.0V part) VOUT(S) -2 2 % VIN= VOUT(S)+2V, IOUT=1mA 5
Input Voltage VIN 2.2 18 V 5
GND Current IGND 1 1.6 2 µA no load, VOUT(S)≤5.0V 5
Line Regulation 0.01 0.02 %/V VOUT(S)+2V≤VIN≤18V, IOUT=1mA 5
Load Regulation 80 mV VIN=VOUT(S)+2V, 1mA≤IOUT≤1A, VOUT(S)≤5.0V 5
Temperature Stability -50 50 ppm/℃ VIN = VOUT(S)+2V, IOUT=1mA, -40℃≤Ta≤125℃ 5
Shutdown Current ISHUT 0.1 1 µA VIN=18V, VEN=0 5
Maximum Output Current IOUTMAX 1 A 5
Current Limit ILIM 1.5 A VIN= VOUT(S)+2V, VOUT = 0.95 ×VOUT(S) 5
Power Supply Rejection Ratio at 10Hz PSRR 75 dB f=10Hz, IOUT=10mA 5
Power Supply Rejection Ratio at 100Hz PSRR 80 dB f=100Hz, IOUT=10mA 5
Power Supply Rejection Ratio at 1kHz PSRR 65 dB f=1kHz, IOUT=10mA 5
Short Circuit Current ISHORT 30 mA VIN=VOUT(S)+2.0V, VOUT=0V 5
EN 'H' Level Voltage VENH 1.5 18 V 5
EN 'L' Level Voltage VENL 0 0.5 V 5
EN 'H' Level Current IENH -0.1 0.1 µA VIN=18V, VEN=VIN 5
EN 'L' Level Current IENL -0.1 0.1 µA VIN=18V, VEN=0 5
Over Temperature Protection OTP 150 ℃ IOUT=1mA 5
Input Voltage (absolute maximum) VIN -0.3 20 V 4
Power Dissipation PD 800 mW ESOP8 4
Thermal Resistance RθJA RθJA 80 ℃/W ESOP8 4
Operating Ambient Temperature Topr -40 85 ℃ 4
Storage Temperature Tstg -40 125 ℃ 4
ESD Protection HBM ESD HBM 4000 V 4

CAD (KiCad official)

  • Symbol: MD7218E50SF4
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: md7218e50sf4-etched.step / md7218e50sf4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md7218e50sf4.step / md7218e50sf4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Mingda Microelectronics datasheet (16 pp, sha256 a1c66b635dda8f58, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF