component
XB5353A
Public Made by Adomby adom
XySemi Battery Management, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXB5353A
XySemi · Battery Management · SOT-23-5
XB5353A from XySemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VT | passive | Test pin reserved for vendor use only and not to be used by the application. |
| 2 | GND | power_in | Ground pin; connect the negative terminal of the battery to this pin. |
| 3 | VDD | power_in | Power supply pin; the absolute maximum VDD input pin voltage is -0.3 to 6 V. |
| 4 | VM | passive | Negative terminal of the battery pack, connected to GND through the internal FET switch; the absolute maximum VM input pin voltage is -6 to 10 V. |
| 5 | VM | passive | Second VM pin, bonded together with pin 4 as the negative terminal of the battery pack; the absolute maximum VM input pin voltage is -6 to 10 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XySemi |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD input pin voltage | -0.3 | 6 | V | 2 | |||
| VM input pin voltage | -6 | 10 | V | 2 | |||
| Operating Ambient Temperature | -40 | 85 | °C | 2 | |||
| Storage Temperature | -55 | 150 | °C | 3 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | Soldering, 10 sec | 3 | |||
| Power Dissipation at T=25°C | 0.4 | W | T=25°C | 3 | |||
| Maximum Junction Temperature | 125 | °C | 3 | ||||
| ESD | 2000 | V | 3 | ||||
| Overcharge Detection Voltage | VCU | 4.25 | 4.3 | 4.35 | V | 3 | |
| Overcharge Release Voltage | VCL | 4.05 | 4.1 | 4.15 | V | 3 | |
| Overdischarge Detection Voltage | VDL | 2.3 | 2.4 | 2.5 | V | 3 | |
| Overdischarge Release Voltage | VDR | 2.9 | 3 | 3.1 | V | 3 | |
| Charger Detection Voltage | VCHA | -0.07 | -0.12 | -0.2 | V | 3 | |
| Overdischarge Current1 Detection Current | IOV1 | 2.1 | 3 | 3.9 | A | VDD=3.5V | 3 |
| Load Short-Circuiting Detection Current | ISHORT | 10 | 20 | 30 | A | VDD=3.5V | 3 |
| Current Consumption in Normal Operation | IOPE | 2.8 | 6 | μA | VDD=3.5V, VM=0V | 3 | |
| Equivalent FET on Resistance | RSS(ON) | 54 | 63 | mΩ | VDD=3.6V, IVM=1.0A | 3 | |
| Current Consumption in Power Down | IPDN | 1.5 | μA | VDD=2.0V, VM pin floating | 3 | ||
| Internal Resistance between VM and VDD | RVMD | 320 | kΩ | VDD=3.5V, VM=1.0V | 3 | ||
| Internal Resistance between VM and GND | RVMS | 100 | kΩ | VDD=2.0V, VM=1.0V | 3 | ||
| Over Temperature Protection | TSHD+ | 120 | °C | 3 | |||
| Over Temperature Recovery Degree | TSHD- | 100 | °C | 4 | |||
| Overcharge Voltage Detection Delay Time | tCU | 130 | mS | 4 | |||
| Overdischarge Voltage Detection Delay Time | tDL | 40 | mS | 4 | |||
| Overdischarge Current Detection Delay Time | tIOV | 10 | mS | VDD=3.5V | 4 | ||
| Load Short-Circuiting Detection Delay Time | tSHORT | 75 | uS | VDD=3.5V | 4 | ||
| Package Thermal Resistance (Junction to Case) | θJC | 130 | °C/W | 3 | |||
| Package Thermal Resistance (Junction to Ambient) | θJA | 250 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
XB5353A - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
xb5353a-etched.step/xb5353a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xb5353a.step/xb5353a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XySemi datasheet (12 pp, sha256
88180c4604d1fd95, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).