component
LT6010IS8#PBF
Public Made by Adomby adom
Analog Devices Precision OpAmps, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT6010IS8#PBF
Analog Devices · Precision OpAmps · SO-8
LT6010IS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NULL | passive | Offset null terminal; the datasheet allows trimming VOS with a 50k potentiometer without degrading drift, with an adjustment range of about ±0.9mV. |
| 2 | -IN | input | Inverting input; the input stage operates between V- + 1V and V+ - 1.2V, and internal 500Ω series resistors with back-to-back diodes limit input current to about 10mA at a 10V differential input. |
| 3 | +IN | input | Non-inverting input; the input stage operates between V- + 1V and V+ - 1.2V, and internal 500Ω series resistors with back-to-back diodes limit input current to about 10mA at a 10V differential input. |
| 4 | V- | power_in | Negative supply rail; the part operates from 2.7V to 36V total supply (V+ to V-), with a 40V absolute maximum total supply. |
| 5 | SHDN | input | Shutdown pin; below 0.2V above V- the amplifier is on, and 2V or more above V- shuts it down to about 12µA supply current, with an internal 85k pull resistor and absolute maximum of V+ to V-. |
| 6 | OUT | output | Rail-to-rail output that swings to within 40mV of either supply rail, with indefinite output short-circuit duration allowed (heat sink may be needed per Note 3). |
| 7 | V+ | power_in | Positive supply rail; the part operates from 2.7V to 36V total supply (V+ to V-), with a 40V absolute maximum total supply. |
| 8 | NULL | passive | Offset null terminal; the datasheet allows trimming VOS with a 50k potentiometer without degrading drift, with an adjustment range of about ±0.9mV. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 20 | 55 | µV | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = 25°C | 2 | |
| Input Offset Voltage | VOS | 85 | µV | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = 0°C to 70°C | 2 | ||
| Input Offset Voltage | VOS | 110 | µV | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = -40°C to 85°C | 2 | ||
| Input Offset Current | IOS | 40 | 200 | pA | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = 25°C | 3 | |
| Input Offset Current | IOS | 300 | pA | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = 0°C to 70°C | 3 | ||
| Input Offset Current | IOS | 400 | pA | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = -40°C to 85°C | 3 | ||
| Input Bias Current | IB | -200 | 40 | 200 | pA | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = 25°C | 3 |
| Input Bias Current | IB | -300 | 300 | pA | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = 0°C to 70°C | 3 | |
| Input Bias Current | IB | -400 | 400 | pA | VS = 5V, 0V; VCM = 2.5V; RL to 0V; SHDN = 0.2V; TA = -40°C to 85°C | 3 | |
| Input Voltage Range (Positive) | VCM | 3.8 | 4 | V | VS = 5V, 0V; Guaranteed by CMRR; full temperature range (●) | 3 | |
| Input Voltage Range (Negative) | VCM | 0.7 | 1 | V | VS = 5V, 0V; Guaranteed by CMRR; full temperature range (●) | 3 | |
| Common Mode Rejection Ratio | CMRR | 107 | 135 | dB | VS = 5V, 0V; VCM = 1V to 3.8V; full temperature range (●) | 3 | |
| Minimum Supply Voltage | 2.4 | 2.7 | V | Guaranteed by PSRR; full temperature range (●) | 3 | ||
| Power Supply Rejection Ratio | PSRR | 112 | 135 | dB | VS = 2.7V to 36V, VCM = 1/2VS; full temperature range (●) | 3 | |
| Large-Signal Voltage Gain | AVOL | 300 | 2000 | V/mV | VS = 5V, 0V; RL = 10k, VOUT = 1V to 4V; full temperature range (●) | 3 | |
| Large-Signal Voltage Gain | AVOL | 250 | 2000 | V/mV | VS = 5V, 0V; RL = 2k, VOUT = 1V to 4V; full temperature range (●) | 3 | |
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 35 | 55 | mV | VS = 5V, 0V; No Load, 50mV Overdrive | 3 | |
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 65 | mV | VS = 5V, 0V; full temperature range (●) | 3 | ||
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 120 | 170 | mV | VS = 5V, 0V; ISOURCE = 1mA, 50mV Overdrive | 3 | |
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 40 | 55 | mV | VS = 5V, 0V; No Load, 50mV Overdrive | 3 | |
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 65 | mV | VS = 5V, 0V; full temperature range (●) | 3 | ||
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 150 | 225 | mV | VS = 5V, 0V; ISINK = 1mA, 50mV Overdrive | 3 | |
| Output Short-Circuit Current (Source) | ISC | 10 | 14 | mA | VS = 5V, 0V; VOUT = 0V, 1V Overdrive (Source) | 4 | |
| Output Short-Circuit Current (Sink) | ISC | 10 | 21 | mA | VS = 5V, 0V; VOUT = 5V, -1V Overdrive (Sink) | 4 | |
| Slew Rate | SR | 0.06 | 0.09 | V/µs | VS = 5V, 0V; AV = -10, RF = 50k, RG = 5k | 4 | |
| Slew Rate | SR | 0.05 | V/µs | VS = 5V, 0V; TA = 0°C to 70°C | 4 | ||
| Gain Bandwidth Product | GBW | 250 | 330 | kHz | VS = 5V, 0V; f = 10kHz | 4 | |
| Supply Current (SHDN On) | IS | 135 | 150 | µA | VS = 5V, 0V; SHDN ≤ V- + 0.2V (On) | 4 | |
| Supply Current (SHDN On) | IS | 190 | µA | VS = 5V, 0V; SHDN ≤ V- + 0.2V (On); TA = 0°C to 70°C | 4 | ||
| Supply Current (SHDN On) | IS | 210 | µA | VS = 5V, 0V; SHDN ≤ V- + 0.2V (On); TA = -40°C to 85°C | 4 | ||
| Supply Current (SHDN Off) | IS | 12 | 25 | µA | VS = 5V, 0V; SHDN = V- + 2.0V (Off) | 4 | |
| Input Offset Voltage | VOS | 20 | 85 | µV | VS = ±15V; VCM = 0V; RL to 0V; SHDN = -14.8V; TA = 25°C | 4 | |
| Input Offset Voltage | VOS | 120 | µV | VS = ±15V; VCM = 0V; RL to 0V; SHDN = -14.8V; TA = 0°C to 70°C | 4 | ||
| Input Offset Voltage | VOS | 160 | µV | VS = ±15V; VCM = 0V; RL to 0V; SHDN = -14.8V; TA = -40°C to 85°C | 4 | ||
| Large-Signal Voltage Gain | AVOL | 1000 | 2000 | V/mV | VS = ±15V; VCM = 0V; RL = 10k, VOUT = -13.5V to 13.5V | 5 | |
| Large-Signal Voltage Gain | AVOL | 500 | 1500 | V/mV | VS = ±15V; VCM = 0V; RL = 5k, VOUT = -13.5V to 13.5V | 5 | |
| Common Mode Rejection Ratio | CMRR | 115 | 135 | dB | VS = ±15V; VCM = -13.5V to 13.5V | 5 | |
| Common Mode Rejection Ratio | CMRR | 112 | dB | VS = ±15V; full temperature range (●) | 5 | ||
| Power Supply Rejection Ratio | PSRR | 112 | 135 | dB | VS = ±15V; VS = ±1.35V to ±18V; full temperature range (●) | 5 | |
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 45 | 80 | mV | VS = ±15V; No Load, 50mV Overdrive | 5 | |
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 100 | mV | VS = ±15V; full temperature range (●) | 5 | ||
| Maximum Output Swing (Positive, Referred to V+) | VOUT | 140 | 195 | mV | VS = ±15V; ISOURCE = 1mA, 50mV Overdrive | 5 | |
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 45 | 80 | mV | VS = ±15V; No Load, 50mV Overdrive | 5 | |
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 100 | mV | VS = ±15V; full temperature range (●) | 5 | ||
| Maximum Output Swing (Negative, Referred to 0V) | VOUT | 150 | 250 | mV | VS = ±15V; ISINK = 1mA, 50mV Overdrive | 5 | |
| Slew Rate | SR | 0.08 | 0.11 | V/µs | VS = ±15V; AV = -10, RF = 50k, RG = 5k | 6 | |
| Gain Bandwidth Product | GBW | 275 | 350 | kHz | VS = ±15V; f = 10kHz | 6 | |
| Supply Current (SHDN On) | IS | 260 | 330 | µA | VS = ±15V; SHDN ≤ V- + 0.2V (On) | 6 | |
| Supply Current (SHDN On) | IS | 380 | µA | VS = ±15V; SHDN ≤ V- + 0.2V (On); TA = 0°C to 70°C | 6 | ||
| Supply Current (SHDN On) | IS | 400 | µA | VS = ±15V; SHDN ≤ V- + 0.2V (On); TA = -40°C to 85°C | 6 | ||
| Total Supply Voltage (V+ to V-) | 40 | V | V+ to V- | 2 | |||
| Differential Input Voltage | 10 | V | Note 2 | 2 | |||
| Input Current | -10 | 10 | mA | Note 2 | 2 | ||
| Maximum Junction Temperature (SO-8) | TJMAX | 150 | °C | SO-8 package | 2 | ||
| Storage Temperature Range (SO-8) | -65 | 150 | °C | SO-8 package | 2 | ||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10 sec | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Specified Temperature Range | -40 | 85 | °C | Note 5 | 2 | ||
| Power Supply Voltage | 2.7 | 36 | V | Total supply, from Features/Description | 1 | ||
| Thermal Resistance, Junction to Ambient | θJA | 190 | °C/W | SO-8 package | 2 |
CAD (KiCad official)
- Symbol:
LT6010IS8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt6010is8-pbf-etched.step/lt6010is8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6010is8-pbf.step/lt6010is8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
c70326b044f372ef, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).