Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SG-8018CG 125.000000MHz TJHPA

Seiko Epson · Programmable Oscillators · SMD2520-4P

SG-8018CG 125.000000MHz TJHPA from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output enable input: High gives the specified frequency at OUT, and Low forces OUT low through a weak pull-down while disabling only the output driver; VIH is 70% VCC min and VIL is 30% VCC max. This pin is the OE function because the ordering code ends in P (Output Enable), not S (Standby, which uses ST on this pin).
2 GND power_in Ground reference for the oscillator; the datasheet recommends a 0.1 µF capacitor between VCC and GND placed as close to the device as possible with short wiring.
3 OUT output CMOS clock output at the programmed frequency (0.67 MHz to 170 MHz for this family), with rise/fall time set by the ordering code (Default, Fast or Slow) and a 15 pF max load condition.
4 VCC power_in Power supply input; the rated supply range for this family is 1.62 V to 3.63 V, and the ordering code T selects 1.8 V to 3.3 V typical operation.

Key specifications

Parameter Value
Manufacturer Seiko Epson
Package SMD2520-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (rated range) VCC 1.62 3.63 V Printed ranges 1.62-1.98 V, 1.98-2.20 V, 2.20-2.80 V, 2.70-3.63 V; T suffix covers 1.8-3.3 V Typ. 1
Output frequency range fO 0.67 170 MHz 1
Storage temperature T_stg -40 125 ºC Storage as single product. 1
Operating temperature (H grade) T_use -40 105 ºC 1
Frequency tolerance (J code, includes aging +25 ºC 10 years) f_tol -50 50 × 10-6 T_use = -40 ºC ~ +105 ºC 1
Current consumption, max, VCC 1.62-1.98 V column ICC 3.2 mA T_use = +105 ºC; No load, fO = 20 MHz 1
Current consumption, max, VCC 1.98-2.20 V column ICC 3.3 mA T_use = +105 ºC; No load, fO = 20 MHz 1
Current consumption, max, VCC 2.20-2.80 V column ICC 3.4 mA T_use = +105 ºC; No load, fO = 20 MHz 1
Current consumption, max, VCC 2.70-3.63 V column ICC 3.5 mA T_use = +105 ºC; No load, fO = 20 MHz 1
Current consumption, max, VCC 1.62-1.98 V column ICC 5.5 mA T_use = +105 ºC; No load, fO = 170 MHz 1
Current consumption, max, VCC 1.98-2.20 V column ICC 5.8 mA T_use = +105 ºC; No load, fO = 170 MHz 1
Current consumption, max, VCC 2.20-2.80 V column ICC 6.7 mA T_use = +105 ºC; No load, fO = 170 MHz 1
Current consumption, max, VCC 2.70-3.63 V column ICC 8.1 mA T_use = +105 ºC; No load, fO = 170 MHz 1
Output disable current, max, VCC 1.62-1.98 V column I_dis 3.2 mA OE = GND, fO = 170 MHz 1
Output disable current, max, VCC 1.98-2.20 V column I_dis 3.2 mA OE = GND, fO = 170 MHz 1
Output disable current, max, VCC 2.20-2.80 V column I_dis 3.3 mA OE = GND, fO = 170 MHz 1
Output disable current, max, VCC 2.70-3.63 V column I_dis 3.5 mA OE = GND, fO = 170 MHz 1
Standby current, max, VCC 1.62-1.98 V column I_std 0.9 μA T_use = +105 ºC; ST¯¯ = GND 1
Standby current, max, VCC 1.98-2.20 V column I_std 1 μA T_use = +105 ºC; ST¯¯ = GND 1
Standby current, max, VCC 2.20-2.80 V column I_std 1.5 μA T_use = +105 ºC; ST¯¯ = GND 1
Standby current, max, VCC 2.70-3.63 V column I_std 2.5 μA T_use = +105 ºC; ST¯¯ = GND 1
Symmetry SYM 45 55 % 50 % VCC Level 1
Output high voltage, Default (fO > 40 MHz) / Fast VOH 90 % VCC IOH -2.5/-3.5/-4.0/-5.0 mA for *A/*B/*C/*D 1
Output high voltage, Default (fO ≤ 40 MHz) VOH 90 % VCC IOH -1.5/-2.0/-2.5/-3.0 mA for *A/*B/*C/*D 1
Output high voltage, Slow VOH 90 % VCC IOH -1.0/-1.5/-2.0/-2.5 mA for *A/*B/*C/*D 1
Output low voltage, Default (fO > 40 MHz) / Fast VOL 10 % VCC IOL 2.5/3.5/4.0/5.0 mA for *A/*B/*C/*D 1
Output low voltage, Default (fO ≤ 40 MHz) VOL 10 % VCC IOL 1.5/2.0/2.5/3.0 mA for *A/*B/*C/*D 1
Output low voltage, Slow VOL 10 % VCC IOL 1.0/1.5/2.0/2.5 mA for *A/*B/*C/*D 1
Output load condition L_CMOS 15 pF 1
Input high voltage (OE or ST) VIH 70 % VCC OE or ST¯¯ 1
Input low voltage (OE or ST) VIL 30 % VCC OE or ST¯¯ 1
Rise/fall time, Default tr/tf 3 ns 20 % - 80 % VCC, L_CMOS = 15 pF; fO > 40 MHz 1
Rise/fall time, Default tr/tf 6 ns 20 % - 80 % VCC, L_CMOS = 15 pF; fO ≤ 40 MHz 1
Rise/fall time, Fast tr/tf 3 ns 20 % - 80 % VCC, L_CMOS = 15 pF; fO = 0.67 MHz ~ 170 MHz 1
Rise/fall time, Slow tr/tf 10 ns 20 % - 80 % VCC, L_CMOS = 15 pF; fO = 0.67 MHz ~ 20 MHz 1
Disable time t_stp 1 μs Measured from the time OE or ST¯¯ pin crosses 30 % VCC 1
Enable time t_sta 1 μs Measured from the time OE pin crosses 70 % VCC 1
Resume time t_res 3 ms Measured from the time ST¯¯ pin crosses 70 % VCC 1
Start-up time t_str 3 ms Measured from the time VCC reaches its rated minimum value, 1.62 V 1
ESD Human Body Model (HBM) breakdown voltage 2000 V Breakdown voltage 6
ESD Machine Model (MM) breakdown voltage 250 V Breakdown voltage 6
ESD Charged Device Model (CDM) breakdown voltage 750 V Breakdown voltage 6

CAD (KiCad official)

  • Symbol: SG-8018CG 125.000000MHz TJHPA
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: sg-8018cg-125-000000mhz-tjhpa-etched.step / sg-8018cg-125-000000mhz-tjhpa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sg-8018cg-125-000000mhz-tjhpa.step / sg-8018cg-125-000000mhz-tjhpa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Seiko Epson datasheet (8 pp, sha256 eb89afd0b8add1d1, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF