Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

Q33310N700348

Seiko Epson · Oscillators · SMD3225-4P

Q33310N700348 from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ST input Standby control: H or open gives the specified frequency output, L sets output to high impedance and stops oscillation.
2 GND power_in Ground; add a 0.01 to 0.1 uF decoupling capacitor between VCC and GND close to the device.
3 OUT output CMOS oscillator output, with a load of 15 pF max and VOH of 90 % VCC min and VOL of 10 % VCC max.
4 VCC power_in Power supply, 1.8 V, 2.5 V or 3.3 V typ. depending on the SG-310 variant; place a 0.01 to 0.1 uF decoupling capacitor close to this pin.

Key specifications

Parameter Value
Manufacturer Seiko Epson
Package SMD3225-4P
Category Crystal Oscillator/Oscillator/Resonator
Pins 4

CAD (KiCad official)

  • Symbol: Q33310N700348
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: q33310n700348-etched.step / q33310n700348-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); q33310n700348.step / q33310n700348.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Seiko Epson datasheet (1 pp, sha256 66a67019d95015f0, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF