component
TPS62056DGSR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62056DGSR
Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm
TPS62056DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input. |
| 2 | LBO | tri_state | Open-drain low battery output; logic low signal indicates low battery voltage. |
| 3 | GND | power_in | Ground. |
| 4 | PG | tri_state | Open-drain power good comparator output; requires pullup resistor to VOUT; floats when output voltage exceeds 95% of nominal value. |
| 5 | FB | input | Feedback pin for fixed output versions; for adjustable versions, connected to external resistive divider. |
| 6 | LBI | input | Low battery input. |
| 7 | SYNC | input | External clock synchronization input accepting 600 kHz to 1.2 MHz; when pulled to GND or VIN enables internal oscillator mode. |
| 8 | EN | input | Enable input; logic high enables converter operation; logic low forces shutdown with supply current less than 2 µA. |
| 9 | SW | output | Switch pin connected to internal power MOSFET drain; connects to external inductor. |
| 10 | PGND | power_in | Power ground; connect all power grounds to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
TPS62056DGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tps62056dgsr-etched.step/tps62056dgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62056dgsr.step/tps62056dgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
9f3ac08fee779ace, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).