3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSY8703BABC
Silergy Corp · LED Drivers · SOT-23-6
SY8703BABC from Silergy Corp, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | passive | Inductor node; connect an inductor between the IN pin and the LX pin (rated up to 33V absolute maximum, 2.5V to 30V recommended). |
| 2 | GND | power_in | Ground pin. |
| 3 | TM | input | Test mode pin; ground this pin in the real application. |
| 4 | EN | input | Enable and dimming control; pull high to turn on the IC, first dimming pulse must be longer than 100ns, recommended dimming frequency range is 20kHz~1MHz. |
| 5 | IN | power_in | Input pin (2.5V to 30V recommended); decouple to GND with 1uF ceramic cap, also used as the positive current sense pin. |
| 6 | SEN | input | Negative current sense pin (recommended VIN-0.5V, absolute maximum VIN-0.7V limit as printed). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silergy Corp |
| Package | SOT-23-6 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Current Sense Limit | VIN-SEN | 96 | 100 | 104 | mV | VIN = 5V, IOUT=100mA, TA = 25°C | 3 |
| Switching Frequency | FSW | 0.8 | 1 | 1.2 | MHz | VIN = 5V, IOUT=100mA, TA = 25°C | 3 |
| Input Voltage Range | VIN | 2.5 | 30 | V | VIN = 5V, IOUT=100mA, TA = 25°C | 3 | |
| Shutdown Current | ISHDN | 5 | 10 | µA | EN=0 | 3 | |
| Min Duty Cycle | 10 | 12 | % | 3 | |||
| Low Side Main FET RON | RDS(ON)1 | 200 | mΩ | 3 | |||
| Main FET Current Limit | ILIM1 | 1.3 | A | 3 | |||
| EN Rising Threshold | VENH | 1.5 | 3 | ||||
| EN Falling Threshold | VENL | 0.4 | 3 | ||||
| IN UVLO Rising Threshold | VIN,UVLO | 2.5 | V | 3 | |||
| UVLO Hysteresis | VUVLO,HYS | 0.1 | V | 3 | |||
| Thermal Shutdown Temperature | TSD | 150 | °C | 3 | |||
| Max Duty Cycle | 100 | % | 3 | ||||
| Absolute max voltage LX, IN, EN | 33 | V | 2 | ||||
| Absolute max voltage SEN (relative to VIN) | -0.7 | 0.7 | V | VIN ± 0.7V | 2 | ||
| Absolute max voltage all other pins | 4 | V | 2 | ||||
| Power Dissipation | PD | 0.6 | W | TA = 25°C, SOT-23-6 | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Operating voltage IN, LX | 2.5 | 30 | V | 2 | |||
| Operating voltage SEN (relative to VIN) | -0.5 | 0.5 | V | VIN ± 0.5V | 2 | ||
| Operating voltage all other pins | 0 | 3.6 | V | 2 | |||
| Junction Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Thermal resistance junction to ambient | θJA | 200 | °C/W | Note 2: natural convection, TA = 25°C, JEDEC 51-3 single layer board | 2 | ||
| Thermal resistance junction to case | θJC | 130 | °C/W | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 1) It is desirable to maximize the PCB copper area connecting to GND pin to achieve the best thermal and noise | 6 |
CAD (KiCad official)
- Symbol:
SY8703BABC - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
sy8703babc-etched.step/sy8703babc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sy8703babc.step/sy8703babc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silergy Corp datasheet (8 pp, sha256
1d274ee34522c2c6, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).