component
SN74AHCT541DBR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74AHCT541DBR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · SSOP-20-208mil
SN74AHCT541DBR from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Output Enable 1, active-low control input; all outputs enter high-impedance state when this pin is high |
| 2 | A1 | input | Data input A1; TTL voltage compatible input for channel 1 |
| 3 | A2 | input | Data input A2; TTL voltage compatible input for channel 2 |
| 4 | A3 | input | Data input A3; TTL voltage compatible input for channel 3 |
| 5 | A4 | input | Data input A4; TTL voltage compatible input for channel 4 |
| 6 | A5 | input | Data input A5; TTL voltage compatible input for channel 5 |
| 7 | A6 | input | Data input A6; TTL voltage compatible input for channel 6 |
| 8 | A7 | input | Data input A7; TTL voltage compatible input for channel 7 |
| 9 | A8 | input | Data input A8; TTL voltage compatible input for channel 8 |
| 10 | GND | power_in | Ground; negative supply reference terminal |
| 11 | Y8 | tri_state | 3-state output Y8; provides non-inverted data when both OE1 and OE2 are low, high-impedance otherwise |
| 12 | Y7 | tri_state | 3-state output Y7; provides non-inverted data when both OE1 and OE2 are low, high-impedance otherwise |
| 13 | Y6 | tri_state | 3-state output Y6; provides non-inverted data when both OE1 and OE2 are low, high-impedance otherwise |
| 14 | Y5 | tri_state | 3-state output Y5; provides non-inverted data when both OE1 and OE2 are low, high-impedance otherwise |
| 15 | Y4 | tri_state | 3-state output Y4; provides non-inverted data when both OE1 and OE2 are low, high-impedance otherwise |
| 16 | Y3 | tri_state | 3-state output Y3; provides non-inverted data when both OE1 and OE2 are low, high-impedance otherwise |
| 17 | Y2 | tri_state | 3-state output Y2; provides non-inverted data when both OE1 and OE2 are low, high-impedance otherwise |
| 18 | Y1 | tri_state | 3-state output Y1; provides non-inverted data when both OE1 and OE2 are low, high-impedance otherwise |
| 19 | OE2 | input | Output Enable 2, active-low control input; all outputs enter high-impedance state when this pin is high |
| 20 | VCC | power_in | Positive supply voltage; recommended operating range 4.5 V to 5.5 V |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-208mil |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74AHCT541DBR - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
sn74ahct541dbr-etched.step/sn74ahct541dbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ahct541dbr.step/sn74ahct541dbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
97bd11b1bbaf105c, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).