3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMK1D2102RGTT
Texas Instruments · Clock Buffers, Drivers · VQFN-16-EP(3x3)
LMK1D2102RGTT from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | EN | input | Output bank enable/disable and input port select with internal 500kΩ pull-up and 320kΩ pull-down resistors (see Table 8-1); left open enables all outputs. |
| 3 | IN1_P | input | Secondary clock input, positive side of a differential pair or single-ended input. |
| 4 | IN1_N | input | Secondary clock input, negative side of a differential pair or single-ended input. |
| 5 | VDD | power_in | Device supply of 1.8V, 2.5V or 3.3V (1.71V to 3.465V). |
| 6 | IN0_P | input | Primary clock input, positive side of a differential pair or single-ended input. |
| 7 | IN0_N | input | Primary clock input, negative side of a differential pair or single-ended input. |
| 8 | VAC_REF0 | output | Bias voltage output for capacitively coupled inputs; TI recommends a 0.1µF capacitor to GND if used. |
| 9 | OUT0_P | output | Positive side of differential LVDS output pair number 0. |
| 10 | OUT0_N | output | Negative side of differential LVDS output pair number 0. |
| 11 | OUT1_P | output | Positive side of differential LVDS output pair number 1. |
| 12 | OUT1_N | output | Negative side of differential LVDS output pair number 1. |
| 13 | OUT2_P | output | Positive side of differential LVDS output pair number 2. |
| 14 | OUT2_N | output | Negative side of differential LVDS output pair number 2. |
| 15 | OUT3_P | output | Positive side of differential LVDS output pair number 3. |
| 16 | OUT3_N | output | Negative side of differential LVDS output pair number 3. |
| 17 | DAP | power_in | Die attach pad (exposed thermal pad), to be soldered to the PCB ground plane for thermal dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | RTC/Clock Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage | VDD | -0.3 | 3.6 | V | 5 | ||
| Input voltage | VIN | -0.3 | 3.6 | V | 5 | ||
| Output voltage | VO | -0.3 | 3.3 | V | max printed as VDD + 0.3 V | 5 | |
| Input current | IIN | -20 | 20 | mA | 5 | ||
| Continuous output current | IO | -50 | 50 | mA | 5 | ||
| Junction temperature | TJ | 135 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | device unpowered | 5 | |
| ESD HBM | V(ESD) | -3000 | 3000 | V | HBM, ANSI/ESDA/JEDEC JS-001, all pins | 5 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | CDM, JESD22C101, all pins | 5 | |
| Core supply voltage 3.3V | VDD | 3.135 | 3.3 | 3.465 | V | 3.3V supply | 5 |
| Core supply voltage 2.5V | VDD | 2.375 | 2.5 | 2.625 | V | 2.5V supply | 5 |
| Core supply voltage 1.8V | VDD | 1.71 | 1.8 | 1.89 | V | 1.8V supply | 5 |
| Supply ramp time | 0.1 | 20 | ms | monotonic ramp required (10-90% of VDD) | 5 | ||
| Operating ambient temperature | TA | -40 | 105 | °C | free-air | 5 | |
| Operating junction temperature | TJ | -40 | 135 | °C | 5 | ||
| EN input high voltage | VIH | 0.7 | V | min 0.7 × VCC, max VCC + 0.3 V; minimum input voltage for logic 1 | 6 | ||
| EN input low voltage | VIL | -0.3 | 0.3 | V | min -0.3 V, max 0.3 × VCC; maximum input voltage for logic 0 | 6 | |
| EN input high current | IIH | 30 | µA | VDD 1.8V/2.5V/3.3V, VIH = VDD | 6 | ||
| EN input low current | IIL | -30 | µA | VDD 1.8V/2.5V/3.3V, VIH = VDD | 6 | ||
| Input pull-up resistor (EN) | Rpull-up(EN) | 500 | kΩ | 7 | |||
| Input pull-down resistor (EN) | Rpull-down(EN) | 320 | kΩ | 7 | |||
| Single-ended input frequency | fIN | 250 | MHz | clock input, DC to 250 MHz | 7 | ||
| Single-ended input voltage swing | VIN_S-E | 0.4 | 3.465 | V | square wave input with two levels | 7 | |
| Input slew rate | dVIN/dt | 0.05 | V/ns | 20% to 80% of amplitude | 7 | ||
| Single-ended input high current | IIH | 50 | µA | VDD = 3.465V, VIH = 3.465V | 7 | ||
| Single-ended input low current | IIL | -30 | µA | VDD = 3.465V, VIL = 0V | 7 | ||
| Input capacitance single-ended LVCMOS | CIN_SE | 3.5 | pF | at 25°C | 7 | ||
| Differential input frequency | fIN | 2 | GHz | clock input | 7 | ||
| Differential input voltage peak-to-peak | VIN,DIFF(p-p) | 0.3 | 2.4 | VPP | VICM = 1V (VDD = 1.8V); VICM = 1.25V (VDD = 2.5V/3.3V) | 7 | |
| Input common-mode voltage | VICM | 0.25 | 2.3 | V | VIN,DIFF(P-P) > 0.4V (VDD = 1.8V/2.5/3.3V) | 7 | |
| Differential input high current | IIH | 30 | µA | VDD = 3.465V, VINP = 2.4V, VINN = 1.2V | 7 | ||
| Differential input low current | IIL | -30 | µA | VDD = 3.465V, VINP = 0V, VINN = 1.2V | 7 | ||
| Input capacitance (single-ended) | CIN_S-E | 3.5 | pF | at 25°C | 7 | ||
| Differential output voltage magnitude | /VOD/ | 250 | 350 | 450 | mV | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω, AMP_SEL = 0 | 7 |
| Differential output voltage magnitude | /VOD/ | 400 | 500 | 650 | mV | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω, AMP_SEL = 1 | 7 |
| Change in VOD magnitude | ΔVOD | -15 | 15 | mV | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω, AMP_SEL = 0 | 7 | |
| Change in VOD magnitude | ΔVOD | -20 | 20 | mV | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω, AMP_SEL = 1 | 7 | |
| Steady-state common-mode output voltage (1.8V) | VOC(SS) | 1 | 1.2 | V | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω (VDD = 1.8V) | 7 | |
| Steady-state common-mode output voltage (2.5V/3.3V) | VOC(SS) | 1.1 | 1.375 | V | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω (VDD = 2.5V/3.3V) | 7 | |
| Change in steady-state common-mode output voltage | ΔVOC(SS) | -15 | 15 | mV | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω | 7 | |
| Output overshoot and undershoot | Vring | -0.1 | 0.1 | VOD | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω, fOUT = 491.52MHz | 7 | |
| Output AC common mode | VOS | 50 | 100 | mVpp | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω | 7 | |
| Short-circuit output current (differential) | IOS | -12 | 12 | mA | VOUTP = VOUTN | 7 | |
| Short-circuit output current (common mode) | IOS(cm) | -24 | 24 | mA | VOUTP = VOUTN = 0 | 8 | |
| Propagation delay | tPD | 0.3 | 0.575 | ns | VIN,DIFF(P-P) = 0.3V, RLOAD = 100Ω | 8 | |
| Output skew | tSK,O | 20 | ps | skew between outputs under same load conditions (4-ch and 8-ch) | 8 | ||
| Output bank skew | tSK,b | 15 | ps | skew between outputs within same bank (2102/2104) | 8 | ||
| Part-to-part skew | tSK,PP | 250 | ps | different devices, same operating conditions, same input and output loading | 8 | ||
| Pulse skew | tSK,P | -20 | 20 | ps | 50% duty cycle input, crossing point to crossing point distortion | 8 | |
| Random additive jitter (rms) | tRJIT(ADD) | 50 | 60 | fs, RMS | fIN = 156.25MHz, 50% duty cycle, input slew rate = 1.5V/ns, integration range = 12kHz - 20MHz, RLOAD = 100Ω | 8 | |
| Phase noise 1kHz | PN1kHz | -143 | dBc/Hz | 156.25MHz carrier, 50% duty cycle, slew 1.5V/ns, RLOAD = 100Ω | 8 | ||
| Phase noise 10kHz | PN10kHz | -152 | dBc/Hz | 156.25MHz carrier, 50% duty cycle, slew 1.5V/ns, RLOAD = 100Ω | 8 | ||
| Phase noise 100kHz | PN100kHz | -157 | dBc/Hz | 156.25MHz carrier, 50% duty cycle, slew 1.5V/ns, RLOAD = 100Ω | 8 | ||
| Phase noise 1MHz | PN1MHz | -160 | dBc/Hz | 156.25MHz carrier, 50% duty cycle, slew 1.5V/ns, RLOAD = 100Ω | 8 | ||
| Phase noise floor | PNfloor | -164 | dBc/Hz | 156.25MHz carrier, 50% duty cycle, slew 1.5V/ns, RLOAD = 100Ω | 8 | ||
| Multiplexer isolation | MUXISO | 80 | dB | fIN = 156.25MHz | 9 | ||
| Output duty cycle | ODC | 45 | 55 | % | input duty cycle 50% | 9 | |
| Output rise and fall time | tR/tF | 300 | ps | 20% to 80%, RLOAD = 100Ω | 9 | ||
| Reference output voltage | VAC_REF | 0.9 | 1.25 | 1.375 | V | VDD = 2.5V, ILOAD = 100µA | 9 |
CAD (KiCad official)
- Symbol:
LMK1D2102RGTT - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lmk1d2102rgtt-etched.step/lmk1d2102rgtt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmk1d2102rgtt.step/lmk1d2102rgtt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
ee558ed92d07921d, retrieved 2026-10-31, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).