Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL072QDREP

Texas Instruments · FET Input Amplifiers · SOIC-8

TL072QDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of amplifier 1; the output may be shorted to ground or to either supply for an unlimited duration if temperature and supply voltages keep dissipation within the rating.
2 1IN− input Inverting input of amplifier 1; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less.
3 1IN+ input Non-inverting input of amplifier 1; the differential input voltage (IN+ with respect to IN−) is rated ±30 V.
4 VCC− power_in Negative supply rail with an absolute maximum rating of 18 V; all voltage values except differential voltages are referenced to the midpoint between VCC+ and VCC−.
5 2IN+ input Non-inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less.
6 2IN− input Inverting input of amplifier 2; the input voltage magnitude must never exceed the supply voltage or 15 V, whichever is less.
7 2OUT output Output of amplifier 2; the output may be shorted to ground or to either supply for an unlimited duration if temperature and supply voltages keep dissipation within the rating.
8 VCC+ power_in Positive supply rail with an absolute maximum rating of 18 V; the common-mode input voltage range includes VCC+.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (25 °C) VIO 3 6 mV TA = 25 °C; VO = 0, RS = 50 Ω 4
Input offset voltage (Full range) VIO 8 mV TA = Full range (−40 °C to 125 °C); VO = 0, RS = 50 Ω 4
Input offset current (25 °C) IIO 5 100 pA TA = 25 °C; VO = 0 4
Input bias current (25 °C) IIB 65 200 pA TA = 25 °C; VO = 0 4
Common-mode input voltage range VICR -12 15 V TA = 25 °C 4
Maximum peak output voltage swing (RL = 10 kΩ) VOM 12 13.5 V TA = 25 °C; RL = 10 kΩ 4
Maximum peak output voltage swing (Full range, RL ≥ 10 kΩ) VOM 12 V TA = Full range; RL ≥ 10 kΩ 4
Maximum peak output voltage swing (Full range, RL ≥ 2 kΩ) VOM 10 V TA = Full range; RL ≥ 2 kΩ 4
Large-signal differential voltage amplification (25 °C) AVD 35 200 V/mV TA = 25 °C; VO = ±10 V, RL ≥ 2 kΩ 4
Large-signal differential voltage amplification (Full range) AVD 15 V/mV TA = Full range; VO = ±10 V, RL ≥ 2 kΩ 4
Common-mode rejection ratio CMRR 80 86 dB TA = 25 °C; VIC = VICRmin, VO = 0, RS = 50 Ω 4
Supply-voltage rejection ratio kSVR 80 86 dB TA = 25 °C; VCC = ±9 V to ±15 V, VO = 0, RS = 50 Ω 4
Supply current per amplifier ICC 1.4 2.5 mA TA = 25 °C; VO = 0, No load 4
Slew rate at unity gain SR 8 13 V/μs VI = 10 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 4
Unity-gain bandwidth B1 3 MHz TA = 25 °C 4
Input offset voltage temperature coefficient αVIO 18 μV/°C TA = Full range; VO = 0, RS = 50 Ω 4
Input offset current (125 °C) IIO 2 nA TA = 125 °C; VO = 0 4
Input bias current (125 °C) IIB 20 nA TA = 125 °C; VO = 0 4
Crosstalk attenuation VO1/VO2 120 dB AVD = 100 4
Rise time tr 0.1 μs VI = 20 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 4
Rise-time overshoot factor 20 % VI = 20 V, RL = 2 kΩ, CL = 100 pF, See Figure 1 4
Equivalent input noise voltage (f = 1 kHz) Vn 18 nV/√Hz f = 1 kHz; RS = 20 Ω 4
Equivalent input noise voltage (f = 10 Hz to 10 kHz) Vn 4 μV f = 10 Hz to 10 kHz; RS = 20 Ω 4
Equivalent input noise current In 0.01 pA/√Hz RS = 20 Ω, f = 1 kHz 4
Total harmonic distortion THD 0.003 % VI(rms) = 6 V, AVD = 1, RL ≥ 2 kΩ, RS ≤ 1 kΩ, f = 1 kHz 4
Supply voltage (VCC+) VCC+ 18 V 3
Supply voltage (VCC−) VCC− 18 V 3
Differential input voltage VID -30 30 V Differential voltages are at IN+, with respect to IN− 3
Input voltage VI -15 15 V Magnitude must not exceed supply voltage or 15 V, whichever is less 3
Thermal resistance, junction-to-ambient (TL072) θJA 97.5 °C/W TL072 (D package), per JESD 51-7 3
Thermal resistance, junction-to-case (TL072) θJC 38.3 °C/W TL072 (D package), per JESD 51-7 3
Operating virtual junction temperature TJ 150 °C 3
Storage temperature range Tstg -65 150 °C 3
Operating free-air temperature (TL072Q) TA -40 125 °C TL072Q (Full range for TL07xQ) 1

CAD (KiCad official)

  • Symbol: TL072QDREP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tl072qdrep-etched.step / tl072qdrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl072qdrep.step / tl072qdrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 f6d4f5eca481e818, retrieved 2026-11-11, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF