Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA126EA

Texas Instruments · Instrumentation Amplifiers · VSSOP-8

INA126EA from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RG passive Gain-set pin. Connect an external gain resistor RG between pin 1 and pin 8 for gains greater than 5 V/V. Gain = 5 + 80 kΩ / RG.
2 V-IN input Inverting (negative) analog input of the instrumentation amplifier.
3 V+IN input Non-inverting (positive) analog input of the instrumentation amplifier.
4 V- power_in Negative supply rail. Operates at −1.35 V to −18 V for split-supply operation, or ground for single-supply operation (2.7 V to 36 V total).
5 Ref input Reference input. Sets the zero-output voltage; must be driven from a low-impedance source or tied to ground. Any impedance at this pin degrades common-mode rejection.
6 VO output Amplifier output. VO = (V+IN − V-IN) × G + VRef, where G = 5 + 80 kΩ / RG.
7 V+ power_in Positive supply rail. Operates at +1.35 V to +18 V (split) or 2.7 V to 36 V (single supply, referenced to V-).
8 RG passive Gain-set pin. Connect an external gain resistor RG between pin 1 and pin 8 for gains greater than 5 V/V. Gain = 5 + 80 kΩ / RG.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • INA126EADGK
  • INA126EA
  • INA126EAP
  • INA126EAPA
  • INA126EAU
  • INA126EAUA
  • INA126EAN
  • INA126EAD
  • INA126EADBQ

CAD (KiCad official)

  • Symbol: INA126EA
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ina126ea-etched.step / ina126ea-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina126ea.step / ina126ea.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 4977bc0100b1ff1c, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF