3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT6105IMS8#TRPBF
Analog Devices · Current Sense Amplifiers · MSOP-8
LT6105IMS8#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative sense input terminal, functional for voltages up to 44V referred to V-, connected to gain-setting resistor RIN1. |
| 2 | V+ | power_in | Power supply voltage pin that can operate from 2.85V to 36V, independent of the voltages on the -IN or +IN pins. |
| 3 | NC | unconnected | Not connected internally. |
| 4 | V- | power_in | Negative power supply voltage or ground for single supply operation. |
| 5 | VOUT | output | Voltage output given by VOUT = AV • (VSENSE ± VOS), where VOS is the input offset voltage. |
| 6 | NC | unconnected | Not connected internally. |
| 7 | NC | unconnected | Not connected internally. |
| 8 | +IN | input | Positive sense input terminal, functional for voltages up to 44V referred to V-, connected to gain-setting resistor RIN2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Input Voltage (+IN - -IN) | -44 | 44 | V | 2 | |||
| Input Voltage V(+IN, -IN) to V- | V(+IN, -IN) | -9.5 | 44 | V | to V- | 2 | |
| Total V+ Supply Voltage from V- | V+ | 36 | V | from V- | 2 | ||
| Output Voltage | VOUT | 36 | V | V- to (V- + 36V) | 2 | ||
| Operating Temperature Range LT6105I | -40 | 85 | °C | LT6105I | 2 | ||
| Specified Temperature Range LT6105I | -40 | 85 | °C | LT6105I | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) MSOP | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance Junction-to-Ambient MS8 | θJA | 250 | °C/W | MS8 package | 2 | ||
| VS+, VS- Input Voltage Range | VS+, VS- | -0.3 | 44 | V | Guaranteed by CMRR | 4 | |
| Voltage Gain Error | AV Error | -1.4 | 1.4 | % | VSENSE = 25mV to 75mV, VS+ = 12V | 4 | |
| Voltage Gain Error | AV Error | -3 | 3 | % | VSENSE = 25mV to 75mV, VS+ = 0V | 4 | |
| Input Offset Voltage MS8 Package | VOS | -0.65 | 0.65 | mV | VSENSE = 5mV | 4 | |
| Input Offset Voltage | VOS | -1.4 | 1.4 | mV | VSENSE = 5mV, VS+ = 0V | 4 | |
| Input Common Mode Rejection Ratio | CMRR | 95 | dB | VSENSE = 5mV, VS+ = 2.8V to 44V | 4 | ||
| Input Common Mode Rejection Ratio | CMRR | 90 | dB | VSENSE = 5mV, VS+ = -0.1V to 44V | 4 | ||
| V+ Power Supply Voltage Range | V+ | 2.85 | 36 | V | Guaranteed by PSRR | 4 | |
| Power Supply Rejection Ratio | PSRR | 94 | dB | VSENSE = 5mV, VS+ = 12V, V+ = 2.85V to 36V | 4 | ||
| Input Current | I(+IN), I(-IN) | 16 | 27 | µA | VSENSE = 0V, VS+ = 3V | 4 | |
| Input Current | I(+IN), I(-IN) | -0.05 | µA | VSENSE = 0V, VS+ = 0V | 4 | ||
| Input Offset Current | I(+IN) - I(-IN) | 0.08 | 0.6 | µA | VSENSE = 0V, VS+ = 3V | 4 | |
| Input Offset Current | I(+IN) - I(-IN) | 0.01 | µA | VSENSE = 0V, VS+ = 0V | 4 | ||
| Input Current (Power-Down) | I(+IN) + I(-IN) | 0.035 | 1 | µA | V+ = 0V, VS+ = 44V, VSENSE = 0V | 4 | |
| V+ Supply Current | IS | 200 | 325 | µA | VSENSE = 0V, VS+ = 3V, V+ = 2.85V | 4 | |
| V+ Supply Current | IS | 250 | 375 | µA | VSENSE = 0V, VS+ = 3V, V+ = 36V | 4 | |
| Minimum Output Voltage | VO(MIN) | 40 | mV | VSENSE = 0mV, VS+ = 44V, V+ = 36V | 4 | ||
| Output High (Referred to V+) | VO(MAX) | 1.27 | 1.6 | V | VSENSE = 120mV, AV = 100, ROUT = 10k | 4 | |
| Maximum Output Current | IOUT | 1 | mA | Guaranteed by VO(MAX) | 4 | ||
| Short-Circuit Output Current | ISC | 1.5 | mA | VS+ = 44V, VS- = 0V, ROUT = 0Ω | 4 | ||
| Slew Rate | SR | 1.75 | V/µs | VSENSE = 5mV to 150mV, AV = 50V/V, RIN = 400Ω | 4 | ||
| Reverse Input Voltage (Referred to V-) | VREV | -12 | -9.5 | V | I(+IN) + I(-IN) = -5mA | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 5mA. Neglecting contact resistance at solder joints, even one square of PC board copper at each resistor end will | 13 |
CAD (KiCad official)
- Symbol:
LT6105IMS8#TRPBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt6105ims8-trpbf-etched.step/lt6105ims8-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6105ims8-trpbf.step/lt6105ims8-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
8874173461ac8e2a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).