component
MX25L25645GZ2I-08G
Public Made by Adomby adom
MXIC Macronix NOR FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMX25L25645GZ2I-08G
MXIC Macronix · NOR FLASH · WSON-8-EP(6x8)
MX25L25645GZ2I-08G from MXIC Macronix, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input (active low) to enable serial interface and device communication. |
| 2 | SO/SIO1 | output | Serial Data Output for standard SPI (1x I/O) mode, or Serial Data Input/Output for Dual and Quad I/O read modes. |
| 3 | WP#/SIO2 | input | Write Protection input (active low) to prevent programming and erasing operations, or Serial Data Input/Output for Quad I/O mode. |
| 4 | GND | power_in | Ground (0V reference). |
| 5 | SI/SIO0 | input | Serial Data Input for standard SPI (1x I/O) mode, or Serial Data Input/Output for Dual and Quad I/O read modes. |
| 6 | SCLK | input | Serial Clock input supporting 0-120 MHz for standard commands and 0-50 MHz for READ instructions per Table 25 AC characteristics. |
| 7 | RESET#/SIO3 | input | Hardware Reset input (active low) to return device to power-on state, or Serial Data Input/Output for Quad I/O mode. |
| 8 | VCC | power_in | Power Supply input with 2.7V to 3.6V operating range (typical 3.0V nominal per Table 26). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC Macronix |
| Package | WSON-8-EP(6x8) |
| Category | Memory |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
MX25L25645GZ2I-08G - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mx25l25645gz2i-08g-etched.step/mx25l25645gz2i-08g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l25645gz2i-08g.step/mx25l25645gz2i-08g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC Macronix datasheet (123 pp, sha256
1546471706e6a9c6, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).