3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHLP5907MFX-2.8
HXY MOSFET · Linear Voltage Regulators (LDO) · SOT-23-5L
HLP5907MFX-2.8 from HXY MOSFET, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input; the datasheet gives an absolute maximum input voltage of 6 V and specifies electrical characteristics with VIN = VOUT + 1 V. |
| 2 | GND | power_in | Ground reference pin (printed as "GDN" in the datasheet pin table). |
| 3 | CE | input | Enable pin: pulling CE to 0 V shuts the output off, with shutdown current of 0.1 μA typical and 1 μA maximum (ICEL, VCE = 0 V). |
| 4 | NC | unconnected | Not connected; the datasheet lists this pin as floating (悬空). |
| 5 | VOUT | power_out | Regulated output rated for 300 mA maximum output current (IOUTmax) across the 1.2 V to 3.6 V output range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | Vin | 6 | V | 2 | |||
| Output current | Iout | 450 | mA | 2 | |||
| Maximum allowable power dissipation | PD | 300 | mW | 2 | |||
| Operating temperature | TOPR | -20 | 85 | °C | 2 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 2 | ||
| Soldering temperature | Tsolder | 260 | °C | 10 s | 2 | ||
| Output voltage accuracy (effective output voltage, lower limit) | VOUT(E) | 0.98 | x VOUT(T) | IOUT=40mA, VIN=Vout+1V | 3 | ||
| Output voltage accuracy (effective output voltage, upper limit) | VOUT(E) | 1.02 | x VOUT(T) | IOUT=40mA, VIN=Vout+1V | 3 | ||
| Input voltage | VIN | 6 | V | 3 | |||
| Maximum output current | IOUTmax | 300 | mA | VIN=Vout+1V | 3 | ||
| Load regulation | ΔVOUT | 50 | mV | VIN=Vout+1V, 1mA≤IOUT≤100mA | 3 | ||
| Dropout voltage | Vdif1 | 90 | mV | IOUT=100mA | 3 | ||
| Dropout voltage | Vdif2 | 230 | mV | IOUT=200mA | 3 | ||
| Quiescent current | ISS | 70 | μA | VIN=Vout+1V | 3 | ||
| Shutdown current | ICEL | 1 | μA | Vce=0V | 3 | ||
| Line regulation | ΔVOUT/(ΔVIN·VOUT) | 0.05 | %/V | IOUT=40mA, Vout+1V ≤ VIN ≤ 8V | 3 | ||
| Output noise voltage | en | 50 | uVrms | IOUT=40mA, 300Hz~50kHz | 3 | ||
| Ripple rejection ratio | PSRR | 70 | dB | Vin=[Vout+1]V +1Vp-pAC, IOUT=40mA, f=1kHz | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
HLP5907MFX-2.8 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated on the KiCad land (body 1.625 x 2.935 mm, terminals on the pads, 1.25 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
hlp5907mfx-2-8-etched.step/hlp5907mfx-2-8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hlp5907mfx-2-8.step/hlp5907mfx-2-8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (5 pp, sha256
34eb9323f6798c32, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).