component
HX1509D-ADJRG
Public Made by Adomby adom
HANSCHIP semiconductor DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX1509D-ADJRG
HANSCHIP semiconductor · DC-DC Converters · SOP-8
HX1509D-ADJRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input pin; the HX1509 operates from 4.5V to 42V DC, and Vin should be bypassed to GND with a suitably large capacitor to eliminate input noise. |
| 2 | OUTPUT | output | Power switch output pin (SW) is the switch node that supplies power to the output. |
| 3 | FEEDBACK | input | Feedback pin (FB) senses the output voltage through an external resistor divider and regulates it, with a feedback threshold voltage of 1.23V. |
| 4 | ON/OFF | input | Enable pin: drive low to turn the device on and drive high to turn it off, and it defaults to low when floating. |
| 5 | GND | power_in | Ground pin that must be laid out carefully, placed outside the Schottky diode to output capacitor ground path to prevent switching current spikes from inducing voltage noise into the HX1509. |
| 6 | GND | power_in | Ground pin that must be laid out carefully, placed outside the Schottky diode to output capacitor ground path to prevent switching current spikes from inducing voltage noise into the HX1509. |
| 7 | GND | power_in | Ground pin that must be laid out carefully, placed outside the Schottky diode to output capacitor ground path to prevent switching current spikes from inducing voltage noise into the HX1509. |
| 8 | GND | power_in | Ground pin that must be laid out carefully, placed outside the Schottky diode to output capacitor ground path to prevent switching current spikes from inducing voltage noise into the HX1509. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (ADJ version) | VOUT | 1.193 | 1.23 | 1.267 | V | Vin = 4.5V to 42V, Iload=0.2A to 2A | 6 |
| Input operation voltage | Vin | 4.5 | 42 | V | 6 | ||
| Shutdown Supply Current | ISTBY | 80 | 200 | uA | VON/OFF=5V | 6 | |
| Quiescent Supply Current | Iq | 2 | 10 | mA | VON/OFF =0V, VFB =Vin | 6 | |
| Oscillator Frequency | Fosc | 127 | 150 | 173 | Khz | 6 | |
| ON/OFF Pin Threshold, High (Regulator OFF) | VON/OFF | 1.4 | V | High (Regulator OFF) | 6 | ||
| ON/OFF Pin Threshold, Low (Regulator ON) | VON/OFF | 0.8 | V | Low (Regulator ON) | 6 | ||
| ON/OFF Pin Input Leakage Current (OFF) | IH | 5 | 15 | uA | VON/OFF =2.5V (OFF) | 6 | |
| ON/OFF Pin Input Leakage Current (ON) | IL | 0.2 | 5 | uA | VON/OFF =0.5V (ON) | 6 | |
| Output Saturation Voltage | VCE | 1.2 | 1.4 | V | VFB=0V, Iout=2A | 6 | |
| Switch Current Limit | IL | 4 | A | VFB =0 | 6 | ||
| Max. Duty Cycle | DMAX | 100 | % | VFB=0V | 6 | ||
| Input Voltage | Vin | -0.3 | 42 | V | 5 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | Upper limit given as Vin | 5 | ||
| ON/OFF Pin Voltage | VON/OFF | -0.3 | V | Upper limit given as Vin | 5 | ||
| Output Switch Pin Voltage | VOutput | -0.3 | V | Upper limit given as Vin | 5 | ||
| ESD (HBM) | 2000 | V | HBM | 5 | |||
| Operating Junction Temperature | TJ | -40 | 125 | ºC | 5 | ||
| Storage Temperature | TSTG | -65 | 150 | ºC | 5 | ||
| Lead Temperature (Soldering) | TLEAD | 245 | ºC | Soldering, 10 sec | 5 | ||
| Thermal Resistance, Junction to Ambient (SOP8) | RJA | 100 | ºC/W | Junction to Ambient, No Heatsink, Free Air | 5 |
CAD (KiCad official)
- Symbol:
HX1509D-ADJRG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx1509d-adjrg-etched.step/hx1509d-adjrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx1509d-adjrg.step/hx1509d-adjrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (13 pp, sha256
47c4f6e9edcebb1a, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).