component
OPA2300AIDGSR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA2300AIDGSR
Texas Instruments · Operational Amplifier · VSSOP-10-0.5mm
OPA2300AIDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OutA | output | Channel A output voltage; the datasheet gives no numeric output limit for this pin, and output swings to within about 100mV of the supply rails at high load (>2kΩ). |
| 2 | -InA | input | Channel A negative (inverting) input voltage. |
| 3 | +InA | input | Channel A positive (non-inverting) input voltage; input voltages more than 0.5V beyond the supply rails must be limited to 10mA or less. |
| 4 | V- | power_in | Negative power supply voltage; the operating supply range is 2.7V to 5.5V total (V+ minus V-). |
| 5 | EnableA | input | Channel A enable pin, referenced to V-: logic high (at least V- + 2.5V) enables the amplifier, logic low (below V- + 0.8V) disables it, and a floating pin is pulled high by internal circuitry. |
| 6 | EnableB | input | Channel B enable pin, referenced to V-: logic high (at least V- + 2.5V) enables the amplifier, logic low (below V- + 0.8V) disables it, and a floating pin is pulled high by internal circuitry. |
| 7 | +InB | input | Channel B positive (non-inverting) input voltage; input voltages more than 0.5V beyond the supply rails must be limited to 10mA or less. |
| 8 | -InB | input | Channel B negative (inverting) input voltage. |
| 9 | OutB | output | Channel B output voltage; the datasheet gives no numeric output limit for this pin, and output swings to within about 100mV of the supply rails at high load (>2kΩ). |
| 10 | V+ | power_in | Positive power supply voltage; the operating supply range is 2.7V to 5.5V total (V+ minus V-), with 5.5V as the absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Amplifiers/Comparators |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
OPA2300AIDGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
opa2300aidgsr-etched.step/opa2300aidgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa2300aidgsr.step/opa2300aidgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
bf65e3231de734fc, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).