3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMM74HCT245MTC
onsemi · Buffers / Drivers · TSSOP-20
MM74HCT245MTC from onsemi, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction control input: HIGH sends data from the A bus to the B bus, LOW sends data from the B bus to the A bus. |
| 2 | A1 | bidirectional | A-bus data input/output 1, which is an input when DIR is HIGH and an output when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 3 | A2 | bidirectional | A-bus data input/output 2, which is an input when DIR is HIGH and an output when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 4 | A3 | bidirectional | A-bus data input/output 3, which is an input when DIR is HIGH and an output when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 5 | A4 | bidirectional | A-bus data input/output 4, which is an input when DIR is HIGH and an output when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 6 | A5 | bidirectional | A-bus data input/output 5, which is an input when DIR is HIGH and an output when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 7 | A6 | bidirectional | A-bus data input/output 6, which is an input when DIR is HIGH and an output when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 8 | A7 | bidirectional | A-bus data input/output 7, which is an input when DIR is HIGH and an output when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 9 | A8 | bidirectional | A-bus data input/output 8, which is an input when DIR is HIGH and an output when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 10 | GND | power_in | Ground pin, 0 V reference for all voltages. |
| 11 | B8 | bidirectional | B-bus data input/output 8, which is an output when DIR is HIGH and an input when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 12 | B7 | bidirectional | B-bus data input/output 7, which is an output when DIR is HIGH and an input when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 13 | B6 | bidirectional | B-bus data input/output 6, which is an output when DIR is HIGH and an input when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 14 | B5 | bidirectional | B-bus data input/output 5, which is an output when DIR is HIGH and an input when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 15 | B4 | bidirectional | B-bus data input/output 4, which is an output when DIR is HIGH and an input when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 16 | B3 | bidirectional | B-bus data input/output 3, which is an output when DIR is HIGH and an input when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 17 | B2 | bidirectional | B-bus data input/output 2, which is an output when DIR is HIGH and an input when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 18 | B1 | bidirectional | B-bus data input/output 1, which is an output when DIR is HIGH and an input when DIR is LOW, with 3-STATE output drive of 6 mA (min). |
| 19 | G | input | Active-low enable input (ENABLE): when LOW the transceiver is enabled and when HIGH the A and B buses are isolated. |
| 20 | VCC | power_in | Positive supply voltage, recommended 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-20 |
| Category | Logic ICs |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
MM74HCT245MTC - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
mm74hct245mtc-etched.step/mm74hct245mtc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mm74hct245mtc.step/mm74hct245mtc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (10 pp, sha256
a8ed52fe8ae35bf1, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).