Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OP777ARZ

Analog Devices · Precision OpAmps · SOIC-8

OP777ARZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect; this pin has no internal connection and is labeled NC in the 8-lead SOIC pin diagram.
2 -IN input Inverting input, which has a built-in 500 Ω series current-limiting resistor; keep the current flowing into the inputs below 5 mA.
3 +IN input Noninverting input; the rated input common-mode range extends from the negative supply to within 1 V of the positive supply, and the part should not be driven more than 3 V beyond the rails.
4 V- power_in Negative supply; single-supply operation is specified with V- = 0 V (VSY = 5 V, VCM = 2.5 V), and dual supplies from ±1.5 V to ±15 V are supported.
5 NC unconnected No connect; this pin has no internal connection and is labeled NC in the 8-lead SOIC pin diagram.
6 OUT output Output, which swings to within 1 mV of both supply rails at light loads and tolerates short circuits to either supply, with current up to 30 mA causing no damage.
7 V+ power_in Positive supply; the part operates from a single supply of 3.0 V to 30 V (absolute maximum supply 36 V).
8 NC unconnected No connect; this pin has no internal connection and is labeled NC in the 8-lead SOIC pin diagram.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset Voltage OP777 (+25°C to +85°C) VOS 20 100 μV 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; +25°C < TA < +85°C 2
Offset Voltage OP777 (-40°C to +85°C) VOS 50 200 μV 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; -40°C < TA < +85°C 2
Input Bias Current IB 5.5 11 nA 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; -40°C < TA < +85°C 2
Input Offset Current IOS 0.1 2 nA 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; -40°C < TA < +85°C 2
Input Voltage Range 0 4 V 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted 2
Common-Mode Rejection Ratio CMRR 104 110 dB 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; VCM = 0 V to 4 V 2
Large Signal Voltage Gain AVO 300 500 V/mV 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; RL = 10 kΩ, VO = 0.5 V to 4.5 V 2
Offset Voltage Drift OP777 ΔVOS/ΔT 0.3 1.3 μV/°C 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; -40°C < TA < +85°C 2
Output Voltage High VOH 4.88 4.91 V 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; IL = 1 mA, -40°C to +85°C 2
Output Voltage Low VOL 126 140 mV 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; IL = 1 mA, -40°C to +85°C 2
Output Circuit Current IOUT -10 10 mA 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; VDROPOUT < 1 V 2
Power Supply Rejection Ratio PSRR 120 130 dB 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; VS = 3 V to 30 V 2
Supply Current per Amplifier (+25°C) ISY 220 270 μA 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; VO = 0 V 2
Supply Current per Amplifier (-40°C to +85°C) ISY 270 320 μA 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; -40°C < TA < +85°C 2
Offset Voltage OP777 (+25°C to +85°C) VOS 30 100 μV 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; +25°C < TA < +85°C 3
Offset Voltage OP777 (-40°C to +85°C) VOS 50 200 μV 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; -40°C < TA < +85°C 3
Input Bias Current IB 5 10 nA 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; -40°C < TA < +85°C 3
Input Offset Current IOS 0.1 2 nA 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; -40°C < TA < +85°C 3
Input Voltage Range -15 14 V 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted 3
Common-Mode Rejection Ratio CMRR 110 120 dB 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; VCM = -15 V to +14 V 3
Large Signal Voltage Gain AVO 1000 2500 V/mV 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; RL = 10 kΩ, VO = -14.5 V to +14.5 V 3
Offset Voltage Drift OP777 ΔVOS/ΔT 0.3 1.3 μV/°C 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; -40°C < TA < +85°C 3
Output Voltage High VOH 14.9 14.94 V 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; IL = 1 mA, -40°C to +85°C 3
Output Voltage Low VOL -14.94 -14.9 V 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; IL = 1 mA, -40°C to +85°C 3
Output Circuit Current IOUT -30 30 mA 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted 3
Power Supply Rejection Ratio PSRR 120 130 dB 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; VS = ±1.5 V to ±15 V 3
Supply Current per Amplifier (+25°C) ISY 300 350 μA 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; VO = 0 V 3
Supply Current per Amplifier (-40°C to +85°C) ISY 350 400 μA 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; -40°C < TA < +85°C 3
Supply Voltage 36 V Absolute maximum ratings apply at 25°C 4
Storage Temperature Range (R package) -65 150 °C RM, R, RU packages 4
Operating Temperature Range -40 85 °C OP777/OP727/OP747 4
Junction Temperature Range (R package) -65 150 °C RM, R, RU packages 4
Lead Temperature Range (soldering) 300 °C Soldering, 60 sec 4
Electrostatic Discharge (Human Body Model) 2000 V Human body model 4
Thermal Resistance Junction-to-Ambient (8-Lead SOIC, R) θJA 158 °C/W Device soldered in circuit board (worst case) 4
Thermal Resistance Junction-to-Case (8-Lead SOIC, R) θJC 43 °C/W 4
Slew Rate SR 0.2 V/μs 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; RL = 2 kΩ 2
Gain Bandwidth Product GBP 0.7 MHz 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted 2
Voltage Noise (peak-to-peak) enp-p 0.4 μV p-p 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; 0.1 Hz to 10 Hz 2
Voltage Noise Density en 15 nV/√Hz 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; f = 1 kHz 2
Current Noise Density in 0.13 pA/√Hz 5 V table: VS=5.0 V, VCM=2.5 V, TA=25C unless noted; f = 1 kHz 2
Slew Rate SR 0.2 V/μs 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; RL = 2 kΩ 3
Gain Bandwidth Product GBP 0.7 MHz 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted 3
Voltage Noise (peak-to-peak) enp-p 0.4 μV p-p 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; 0.1 Hz to 10 Hz 3
Voltage Noise Density en 15 nV/√Hz 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; f = 1 kHz 3
Current Noise Density in 0.13 pA/√Hz 15 V table: VS=15 V, VCM=0 V, TA=25C unless noted; f = 1 kHz 3

CAD (KiCad official)

  • Symbol: OP777ARZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: op777arz-etched.step / op777arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); op777arz.step / op777arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 d32673661d910ed3, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF