3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM330T-5.0
Texas Instruments · Linear Voltage Regulators (LDO) · TO-220-3
LM330T-5.0 from Texas Instruments, in a TO-220-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | power_in | Unregulated input voltage, operating range up to 26V, with reverse-battery protection to -12V DC and line transient protection (40V for 1000 ms); output shuts down on overvoltage. |
| 2 | GND | power_in | Ground reference for the regulator, also connected to the metal tab. |
| 3 | OUTPUT | power_out | Regulated 5V output (4.8V to 5.2V at 25°C) sourcing up to 150 mA, with a 10 µF minimum output capacitor required for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-220-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | Vo | 4.8 | 5 | 5.2 | V | Tj = 25°C | 2 |
| Output Voltage (over temperature) | 4.75 | 5.25 | V | 5 < Io < 150 mA; 6 < VIN < 26V; 0°C ≤ Tj ≤ 100°C | 2 | ||
| Current Limit | 150 | 400 | 700 | mA | 2 | ||
| Dropout Voltage | 0.32 | 0.6 | V | Io = 150 mA | 2 | ||
| Line Regulation | ΔVo | 7 | 25 | mV | 9 < VIN < 16V, Io = 5 mA | 2 | |
| Line Regulation | 30 | 60 | mV | 6 < VIN < 26V, Io = 5 mA | 2 | ||
| Load Regulation | 14 | 50 | mV | 5 < Io < 150 mA | 2 | ||
| Quiescent Current | IQ | 3.5 | 7 | mA | Io = 10 mA | 2 | |
| Quiescent Current | IQ | 5 | 11 | mA | Io = 50 mA | 2 | |
| Quiescent Current | IQ | 18 | 40 | mA | Io = 150 mA | 2 | |
| VIN Overvoltage Shutdown Voltage | 26 | 38 | V | 2 | |||
| Max Line Transient | 60 | V | 2 | ||||
| Max Line Transient | 50 | V | 1s, Vo ≤ 5.5V | 2 | |||
| Quiescent Current Change | ΔIQ | 10 | % | 6 < VIN < 26V | 2 | ||
| Long Term Stability | 20 | mV/1000 hrs | 2 | ||||
| Line Transient | 14 | VIN = 40V, RL = 100Ω, 1s | 2 | ||||
| Reverse Polarity | -80 | VIN = −6V, RL = 100Ω | 2 | ||||
| Reverse Polarity | -30 | 2 | |||||
| Input Voltage DC | -12 | Vo > −0.3V, RL = 100Ω | 2 | ||||
| Output Noise Voltage | 50 | μV | 10 Hz-100 kHz | 2 | |||
| Output Impedance | 200 | mΩ | Io = 100 mADC + 10 mArms | 2 | |||
| Ripple Rejection | 56 | dB | 2 | ||||
| Input Voltage Operating Range | 26 | V | 2 | ||||
| Line Transient Protection | 40 | V | 1000 ms | 2 | |||
| Operating Temperature Range | 0 | 70 | °C | 2 | |||
| Maximum Junction Temperature | 125 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec. | 2 | |||
| Thermal Resistance Junction to Case | 4 | °C/W | 2 | ||||
| Thermal Resistance Junction to Ambient | 50 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LM330T-5.0 - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220-3 (KiCad packages3D, STEP)
- 3D model files:
lm330t-5-0-etched.step/lm330t-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm330t-5-0.step/lm330t-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (11 pp, sha256
d003ed7e92e48efd, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).