3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA296B4IDDFR
Texas Instruments · Current Sense Amplifiers · TSOT-23-8
INA296B4IDDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Current-sense amplifier negative input; for high-side use connect to the load side of the sense resistor, and for low-side use connect to the ground side. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | REF2 | input | Reference 2 voltage input; connect to a potential from 0V to VS. |
| 4 | NC | unconnected | Reserved pin; connect to ground. |
| 5 | OUT | output | Output voltage of the current-sense amplifier. |
| 6 | VS | power_in | Power supply input, 2.7V to 20V. |
| 7 | REF1 | input | Reference 1 voltage input; connect to a potential from 0V to VS. |
| 8 | IN+ | input | Current-sense amplifier positive input; for high-side use connect to the bus-voltage side of the sense resistor, and for low-side use connect to the load side. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | -5 | 110 | V | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Common-mode rejection ratio, input-referred (INA296B) | CMRR | 120 | 130 | dB | VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C | 5 | |
| Offset voltage, input-referred (INA296B) | Vos | -150 | 25 | 150 | µV | VSENSE = 0mV | 5 |
| Offset voltage drift, input-referred (INA296B) | dVos/dT | -500 | 100 | 500 | nV/°C | TA = -40°C to 125°C | 5 |
| Power-supply rejection ratio, input-referred (INA296B) | PSRR | -10 | 1 | 10 | µV/V | VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C | 5 |
| Input bias current | IB | 25 | 35 | 45 | µA | IB+, IB-, VSENSE=0mV | 5 |
| Gain error (INA296B) | GERR | -0.1 | 0.02 | 0.1 | % | (GND + 50mV) < VOUT < (VS - 200mV) | 6 |
| Gain error drift (INA296B) | -5 | 0.2 | 5 | ppm/°C | TA = -40°C to +125°C | 6 | |
| Swing to ground | 8 | 20 | mV | RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C | 6 | ||
| Reference voltage rejection ratio, input-referred (INA296B) | RVRR | -20 | 10 | 20 | µV/V | VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C | 6 |
| Reference divider accuracy (INA296B) | -0.15 | 0.02 | 0.15 | % | VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND or VREF1 = GND, VREF2 = VS, TA = -40°C to +125°C | 6 | |
| Operating supply range | VS | 2.7 | 5 | 20 | V | 4 | |
| Common-mode input range (recommended) | VCM | -5 | 48 | 110 | V | 4 | |
| Ambient temperature (recommended) | TA | -40 | 125 | °C | 4 | ||
| Supply voltage | VS | 22 | V | 4 | |||
| Differential analog input voltage (VIN+ − VIN-) | -30 | 30 | V | 4 | |||
| Common-mode analog input voltage | -20 | 120 | V | 4 | |||
| REF1, REF2, NC inputs voltage | -0.3 | V | Relative to GND; maximum VS + 0.3 | 4 | |||
| Output voltage | -0.3 | V | Relative to GND; maximum VS + 0.3 | 4 | |||
| Operating temperature | TA | -55 | 150 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DDF) | RθJA | 129.7 | °C/W | DDF (SOT23) 8-pin | 4 | ||
| Junction-to-case (top) thermal resistance (DDF) | RθJC(top) | 58 | °C/W | DDF (SOT23) 8-pin | 4 | ||
| Junction-to-board thermal resistance (DDF) | RθJB | 52.6 | °C/W | DDF (SOT23) 8-pin | 4 | ||
| Junction-to-top characterization parameter (DDF) | ΨJT | 2.3 | °C/W | DDF (SOT23) 8-pin | 4 | ||
| Junction-to-board characterization parameter (DDF) | ΨJB | 52.3 | °C/W | DDF (SOT23) 8-pin | 4 | ||
| Supply voltage range | VS | 2.7 | 20 | V | 7 | ||
| Quiescent current | IQ | 2.5 | 3 | mA | VSENSE = 0mV | 7 | |
| Quiescent current over temperature | IQ | 3.2 | mA | VSENSE = 0mV, TA = -40°C to +125°C | 7 | ||
| Specified ambient temperature range | TA | -40 | 125 | °C | 7 | ||
| Bandwidth | BW | 1.1 | MHz | All gains, −3dB bandwidth | 6 | ||
| Slew rate, rising | SR | 8 | V/µs | 6 | |||
| Settling time to 1% | 1 | µs | VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, output settles to 1% | 6 | |||
| Voltage noise density (B4 device, 100V/V) | 36 | nV/√Hz | A4, B4 devices | 7 | |||
| Gain (B4 device) | G | 100 | V/V | B4 devices | 5 |
CAD (KiCad official)
- Symbol:
INA296B4IDDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ina296b4iddfr-etched.step/ina296b4iddfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina296b4iddfr.step/ina296b4iddfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
a811e78481cbe850, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).