Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SG-8018CE 10.000000MHz TJHSA

Seiko Epson · Programmable Oscillators · SMD3225-4P

SG-8018CE 10.000000MHz TJHSA from Seiko Epson, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ST input Active-low standby control for this S-function variant: High gives the specified output frequency on OUT, while Low pulls OUT low through a weak pull-down and puts the device in standby, reducing supply current to I_std, with VIH min 70% VCC and VIL max 30% VCC.
2 GND power_in Ground reference for the oscillator; a 0.1 µF capacitor should be connected between VCC and GND, placed close to the device on the device side of the PCB with short wiring for optimum jitter.
3 OUT output CMOS clock output at the selected frequency (0.67 MHz to 170 MHz), with VOH min 90% VCC and VOL max 10% VCC, rise/fall time set by the ordering code, and a maximum load of 15 pF.
4 VCC power_in Power supply, rated 1.62 V to 3.63 V for this part, with a 0.1 µF decoupling capacitor to GND recommended.

Key specifications

Parameter Value
Manufacturer Seiko Epson
Package SMD3225-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 1.62 3.63 V Supply voltage range (series); suffix T = 1.8 V ~ 3.3 V Typ. 1
Output frequency range fO 0.67 170 MHz 1
Storage temperature T_stg -40 125 ºC Storage as single product. 1
Operating temperature T_use -40 105 ºC 1
Frequency tolerance (J: 50 × 10-6) f_tol -50 50 × 10-6 T_use = -40 ºC ~ +105 ºC; includes initial tolerance, temperature, supply, reflow, load drift and aging (+25 ºC, 10 years) 1
Current consumption ICC 3.2 mA T_use = +105 ºC; No load, fO = 20 MHz; 1st of 4 supply-column values (order as printed) 1
Current consumption ICC 3.3 mA T_use = +105 ºC; No load, fO = 20 MHz; 2nd of 4 supply-column values (order as printed) 1
Current consumption ICC 3.4 mA T_use = +105 ºC; No load, fO = 20 MHz; 3rd of 4 supply-column values (order as printed) 1
Current consumption ICC 3.5 mA T_use = +105 ºC; No load, fO = 20 MHz; 4th of 4 supply-column values (order as printed) 1
Standby current I_std 0.9 μA T_use = +105 ºC; ST¯¯ = GND; 1st of 4 supply-column values (order as printed) 1
Standby current I_std 1 μA T_use = +105 ºC; ST¯¯ = GND; 2nd of 4 supply-column values (order as printed) 1
Standby current I_std 1.5 μA T_use = +105 ºC; ST¯¯ = GND; 3rd of 4 supply-column values (order as printed) 1
Standby current I_std 2.5 μA T_use = +105 ºC; ST¯¯ = GND; 4th of 4 supply-column values (order as printed) 1
Symmetry SYM 45 55 % 50 % VCC Level 1
Output voltage high VOH 90 % VCC IOH/IOL Conditions [mA] 1
Output voltage low VOL 10 % VCC IOH/IOL Conditions [mA] 1
Output load capacitance L_CMOS 15 pF 1
Input voltage high VIH 70 % VCC OE or ST¯¯ pin 1
Input voltage low VIL 30 % VCC OE or ST¯¯ pin 1
Rise/fall time (Default, fO ≤ 40 MHz) tr/tf 6 ns fO ≤ 40 MHz; 20 % - 80 % VCC, L_CMOS = 15 pF 1
Disable time t_stp 1 μs Measured from the time OE or ST¯¯ pin crosses 30 % VCC 1
Enable time t_sta 1 μs Measured from the time OE pin crosses 70 % VCC 1
Resume time t_res 3 ms Measured from the time ST¯¯ pin crosses 70 % VCC 1
Start-up time t_str 3 ms Measured from the time VCC reaches its rated minimum value, 1.62 V 1
Reflow peak temperature 260 °C Peak Temp. (Max), SG-8018CE reflow 7

CAD (KiCad official)

  • Symbol: SG-8018CE 10.000000MHz TJHSA
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sg-8018ce-10-000000mhz-tjhsa-etched.step / sg-8018ce-10-000000mhz-tjhsa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sg-8018ce-10-000000mhz-tjhsa.step / sg-8018ce-10-000000mhz-tjhsa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Seiko Epson datasheet (8 pp, sha256 c06c743c9d68e8da, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF