3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-0931-500E
Broadcom Limited · Digital Isolators · SO-8
HCPL-0931-500E from Broadcom Limited, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Power Supply 1 for the side-1 circuitry, 3.0 V to 5.5 V recommended (absolute max 7 V), decoupled with a 47 nF ceramic capacitor close to the pin. |
| 2 | IN1 | input | Logic input signal for channel 1, referenced to GND1, with VIH min 2.4 V and VIL max 0.8 V. |
| 3 | OUT2 | output | Logic output signal for channel 2 (the reverse-direction channel, driven from IN2), referenced to GND1 and powered from VDD1. |
| 4 | GND1 | power_in | Power Supply Ground 1 for the side-1 circuitry. |
| 5 | GND2 | power_in | Power Supply Ground 2 for the side-2 circuitry. |
| 6 | IN2 | input | Logic input signal for channel 2, referenced to GND2, with VIH min 2.4 V and VIL max 0.8 V. |
| 7 | OUT1 | output | Logic output signal for channel 1, referenced to GND2, with VOH of at least 0.8*VDD2 at -4 mA. |
| 8 | VDD2 | power_in | Power Supply 2 for the side-2 circuitry, 3.0 V to 5.5 V recommended (absolute max 7 V), decoupled with a 47 nF ceramic capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom Limited |
| Package | SO-8 |
| Category | Signal Isolation Devices |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient operating temperature (recommended) | TA | -40 | 100 | °C | 10 | ||
| Supply voltage (recommended) | VDD1, VDD2 | 3 | 5.5 | V | 10 | ||
| Logic High Input Voltage (max printed as VDD1) | VIH | 2.4 | V | 10 | |||
| Logic Low Input Voltage | VIL | 0 | 0.8 | V | 10 | ||
| Input signal rise and fall times | tIR, tIF | 1 | μs | 10 | |||
| Storage temperature (absolute maximum) | TS | -55 | 150 | °C | 10 | ||
| Ambient operating temperature (absolute maximum) | TA | -55 | 125 | °C | 10 | ||
| Supply voltage (absolute maximum) | VDD1, VDD2 | -0.5 | 7 | V | 10 | ||
| Input voltage (absolute maximum; max printed as VDD1 + 0.5) | VIN | -0.5 | V | 10 | |||
| Output voltage (absolute maximum; max printed as VDD2 + 0.5) | VOUT | -0.5 | V | 10 | |||
| Output current drive (absolute maximum) | IOUT | 10 | mA | 10 | |||
| Lead solder temperature (absolute maximum) | 260 | °C | 10s | 10 | |||
| ESD (absolute maximum) | 2 | kV | Human Body Model | 10 | |||
| Maximum data rate (3.3V operation) | 100 | 110 | MBd | CL = 15 pF | 12 | ||
| Clock frequency (3.3V operation) | fmax | 50 | MHz | 12 | |||
| Propagation delay to logic low output (3.3V operation) | tPHL | 12 | 18 | ns | 12 | ||
| Propagation delay to logic high output (3.3V operation) | tPLH | 12 | 18 | ns | 12 | ||
| Pulse width (3.3V operation) | tPW | 10 | ns | 12 | |||
| Pulse width distortion (3.3V operation) | /PWD/ | 2 | 3 | ns | 12 | ||
| Propagation delay skew (3.3V operation) | tPSK | 4 | 6 | ns | 12 | ||
| Output rise time 10% to 90% (3.3V operation) | tR | 2 | 4 | ns | 12 | ||
| Output fall time 10% to 90% (3.3V operation) | tF | 2 | 4 | ns | 12 | ||
| Channel-to-channel skew, dual and quad channels (3.3V operation) | tCSK | 2 | 3 | ns | 12 | ||
| Common mode transient immunity (3.3V operation) | /CMH/, /CML/ | 15 | 18 | kV/µs | Vcm = 1000V | 12 | |
| Quiescent supply current 1 IDD1 (3.3V operation) | IDD1 | 1.5 | 2 | mA | VIN = 0V | 11 | |
| Quiescent supply current 2 IDD2 (3.3V operation) | IDD2 | 1.5 | 2 | mA | VIN = 0V | 11 | |
| Logic input current (3.3V operation) | IIN | -10 | 10 | µA | 11 | ||
| Logic low output voltage (3.3V operation) | VOL | 0 | 0.1 | V | IOUT = 20 µA, VIN = VIL | 11 | |
| Logic low output voltage (3.3V operation) | VOL | 0.5 | 0.8 | V | IOUT = 4 mA, VIN = VIL | 11 | |
| Maximum data rate (5V operation) | 100 | 110 | MBd | CL = 15 pF | 13 | ||
| Clock frequency (5V operation) | fmax | 50 | MHz | 13 | |||
| Propagation delay to logic low output (5V operation) | tPHL | 10 | 15 | ns | 13 | ||
| Propagation delay to logic high output (5V operation) | tPLH | 10 | 15 | ns | 13 | ||
| Pulse width (5V operation) | tPW | 10 | ns | 13 | |||
| Pulse width distortion (5V operation) | /PWD/ | 2 | 3 | ns | 13 | ||
| Propagation delay skew (5V operation) | tPSK | 4 | 6 | ns | 13 | ||
| Output rise time 10% to 90% (5V operation) | tR | 1 | 3 | ns | 13 | ||
| Output fall time 10% to 90% (5V operation) | tF | 1 | 3 | ns | 13 | ||
| Channel-to-channel skew, dual and quad channels (5V operation) | tCSK | 2 | 3 | ns | 13 | ||
| Common mode transient immunity (5V operation) | /CMH/, /CML/ | 15 | 18 | kV/µs | Vcm = 1000V | 13 | |
| Quiescent supply current 1 IDD1 (5V operation) | IDD1 | 2.5 | 3 | mA | VIN = 0V | 12 | |
| Quiescent supply current 2 IDD2 (5V operation) | IDD2 | 2.5 | 3 | mA | VIN = 0V | 13 | |
| Logic input current (5V operation) | IIN | -10 | 10 | µA | 13 | ||
| Logic low output voltage (5V operation) | VOL | 0 | 0.1 | V | IOUT = 20 µA, VIN = VIL | 13 | |
| Logic low output voltage (5V operation) | VOL | 0.5 | 0.8 | V | IOUT = 4 mA, VIN = VIL | 13 | |
| Package power dissipation (8-pin SOIC) | PPD | 150 | mW | 9 | |||
| Capacitance input-output, dual channel | CI-O | 2 | pF | f = 1 MHz | 9 | ||
| Thermal resistance junction to case (8-pin SOIC) | θJCT | 144 | °C/W | Thermocouple located at center underside of package | 9 |
CAD (KiCad official)
- Symbol:
HCPL-0931-500E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-0931-500e-etched.step/hcpl-0931-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-0931-500e.step/hcpl-0931-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom Limited datasheet (18 pp, sha256
165f65248fb845d7, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).