Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD7890ARZ-10

Analog Devices · Analog To Digital Converters (ADCs) · SOIC-24-300mil

AD7890ARZ-10 from Analog Devices, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AGND power_in Analog Ground, the ground reference for the track/hold, comparator, and DAC.
2 SMODE input Selects serial mode: logic low gives self-clocking (master) mode with RFS and SCLK as outputs, and logic high gives external clocking (slave) mode with SCLK and RFS as inputs.
3 DGND power_in Digital Ground, the ground reference for the digital circuitry.
4 CEXT passive External capacitor connection that sets the length of the internal pulse, where larger capacitances extend the pulse to allow settling time through an external antialiasing filter or signal conditioning.
5 CONVST input Edge-triggered Convert Start, where a low-to-high transition puts the track/hold into hold and initiates conversion once the internal pulse has timed out.
6 CLK IN input External TTL-compatible clock input that provides the clock source for the conversion sequence and, in self-clocking mode, the derived SCLK output.
7 SCLK bidirectional Serial clock that is an external input in external clocking (slave) mode, or the internal serial clock derived from CLK IN and output in self-clocking (master) mode.
8 TFS input Active-low Transmit Frame Synchronization input, with serial data expected after its falling edge.
9 RFS bidirectional Active-low Receive Frame Synchronization pin, which is an external input strobe in external clocking mode or an internally generated output strobe in self-clocking mode for accessing serial data from the output register.
10 DATA OUT output Serial data output of sixteen bits (one leading zero, three control register address bits, and 12 conversion bits), valid on the falling edge of SCLK for sixteen edges after RFS goes low, with twos complement coding for the AD7890-10.
11 DATA IN input Serial data input, where the first five bits after TFS goes low are loaded to the control register on the first five falling SCLK edges and later edges are ignored while TFS remains low.
12 VDD power_in Positive supply voltage, 5 V ± 5%.
13 MUX OUT output Multiplexer output carrying the selected channel's signal over 0 V to 2.5 V with a nominal output impedance of 3.5 kΩ, to be connected to SHA IN if no antialiasing filter is used.
14 SHA IN input High-impedance track/hold input with an input voltage range of 0 V to 2.5 V.
15 AGND power_in Analog Ground, the ground reference for the track/hold, comparator, and DAC.
16 VIN1 input Single-ended analog input channel 1 with an input range of ±10 V for the AD7890-10, selected through the A0, A1, and A2 control register bits, with guaranteed break-before-make multiplexer operation.
17 VIN2 input Single-ended analog input channel 2 with an input range of ±10 V for the AD7890-10, selected through the A0, A1, and A2 control register bits, with guaranteed break-before-make multiplexer operation.
18 VIN3 input Single-ended analog input channel 3 with an input range of ±10 V for the AD7890-10, selected through the A0, A1, and A2 control register bits, with guaranteed break-before-make multiplexer operation.
19 VIN4 input Single-ended analog input channel 4 with an input range of ±10 V for the AD7890-10, selected through the A0, A1, and A2 control register bits, with guaranteed break-before-make multiplexer operation.
20 VIN5 input Single-ended analog input channel 5 with an input range of ±10 V for the AD7890-10, selected through the A0, A1, and A2 control register bits, with guaranteed break-before-make multiplexer operation.
21 VIN6 input Single-ended analog input channel 6 with an input range of ±10 V for the AD7890-10, selected through the A0, A1, and A2 control register bits, with guaranteed break-before-make multiplexer operation.
22 VIN7 input Single-ended analog input channel 7 with an input range of ±10 V for the AD7890-10, selected through the A0, A1, and A2 control register bits, with guaranteed break-before-make multiplexer operation.
23 VIN8 input Single-ended analog input channel 8 with an input range of ±10 V for the AD7890-10, selected through the A0, A1, and A2 control register bits, with guaranteed break-before-make multiplexer operation.
24 REF OUT/REF IN bidirectional Voltage reference pin that outputs the on-chip 2.5 V reference (to be decoupled to AGND with 0.1 μF when used internally) or accepts a nominal 2.5 V external reference that overdrives the internal reference.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-24-300mil
Category Data Converters
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Signal to (Noise + Distortion) Ratio 70 dB fIN = 10 kHz sine wave, fSAMPLE = 100 kHz 3
Total Harmonic Distortion (THD) THD -77 dB fIN = 10 kHz sine wave, fSAMPLE = 100 kHz 3
Peak Harmonic or Spurious Noise -78 dB fIN = 10 kHz sine wave, fSAMPLE = 100 kHz 3
Channel-to-Channel Isolation -80 dB fIN = 1 kHz sine wave 3
Relative Accuracy (A Version) -1 1 LSB 3
Differential Nonlinearity (A Version) -1 1 LSB 3
Positive Full-Scale Error (A Version) -2.5 2.5 LSB 3
Full-Scale Error Match (A Version) 2 LSB 3
Negative Full-Scale Error (AD7890-10 only, A Version) -2 2 LSB 3
Bipolar Zero Error (A Version) -5 5 LSB 3
Bipolar Zero Error Match (A Version) 2 LSB 3
Input Resistance (AD7890-10) 20 kΩ 3
Output Resistance (AD7890-10, AD7890-4) 3 5 kΩ 3
SHA IN Input Current IIN -50 50 nA 3
REF IN Input Voltage Range 2.375 2.625 V 2.5 V ± 5% 3
REF IN Input Impedance 1.6 kΩ Resistor connected to internal reference node 3
REF IN Input Capacitance 10 pF 3
REF OUT Error @ 25°C -10 10 mV @ 25°C 3
REF OUT Error over TMIN to TMAX (A Version) -20 20 mV TMIN to TMAX 3
Logic Input High Voltage VINH 2.4 V VDD = 5 V ± 5% 4
Logic Input Low Voltage VINL 0.8 V VDD = 5 V ± 5% 4
Input Current IIN -10 10 μA VIN = 0 V to VDD 4
Input Capacitance (logic inputs) CIN 10 pF 4
Output High Voltage VOH 4 V ISOURCE = 200 μA 4
Output Low Voltage VOL 0.4 V ISINK = 1.6 mA 4
Conversion Time tCONVERT 5.9 μs fCLK IN = 2.5 MHz, MUX OUT, connected to SHA IN 4
Track/Hold Acquisition Time 2 μs 4
IDD (Normal Mode) IDD 10 mA Logic inputs = 0 V or VDD 4
Power Dissipation, Normal Mode 50 mW Typically 30 mW 4
VDD Supply Tolerance VDD -5 5 % for specified performance 4
VDD to AGND VDD -0.3 7 V 6
VDD to DGND VDD -0.3 7 V 6
Analog Input Voltage to AGND (AD7890-10) -17 17 V 6
Reference Input Voltage to AGND (upper limit VDD + 0.3 V) -0.3 V 6
Digital Input Voltage to DGND (upper limit VDD + 0.3 V) -0.3 V 6
Digital Output Voltage to DGND (upper limit VDD + 0.3 V) -0.3 V 6
Operating Temperature Range, Commercial (A, B Versions) TA -40 85 °C 6
Storage Temperature Range -65 150 °C 6
Junction Temperature TJ 150 °C 6
SOIC_W Package Power Dissipation 450 mW 6
Lead Temperature, Soldering, Vapor Phase 215 °C 60 sec 6
Lead Temperature, Soldering, Infrared 220 °C 15 sec 6
Master Clock Frequency (minimum) fCLKIN 100 kHz Master Clock Frequency. For specified performance. 5
Master Clock Frequency (maximum) fCLKIN 2.5 MHz Master Clock Frequency. For specified performance. 5
CONVST Pulse Width tCST 100 ns CONVST Pulse Width. 5
Digital Output Rise Time tr 25 ns Digital Output Rise Time. Typically 10 ns. 5
Digital Output Fall Time tf 25 ns Digital Output Fall Time. Typically 10 ns. 5
RFS Low to Data Valid Delay (self-clocking) t2 25 ns RFS Low to Data Valid Delay. 5
SCLK Rising Edge to Data Valid Delay (self-clocking) t5 20 ns SCLK Rising Edge to Data Valid Delay. 5
Bus Relinquish Time after Rising Edge of SCLK (self-clocking) t7 50 ns Bus Relinquish Time after Rising Edge of SCLK. 5
Data Valid to SCLK Falling Edge Setup Time t10 20 ns Data Valid to SCLK Falling Edge Setup Time. 5
Data Valid to SCLK Falling Edge Hold Time t11 10 ns Data Valid to SCLK Falling Edge Hold Time. 5
SCLK High Pulse Width (external clocking) t15 50 ns SCLK High Pulse Width. 5
SCLK Low Pulse Width (external clocking) t16 50 ns SCLK Low Pulse Width. 5
SCLK Rising Edge to Data Valid Delay (external clocking) t17 35 ns SCLK Rising Edge to Data Valid Delay. 5
RFS to SCLK Falling Edge Hold Time t18 20 ns RFS to SCLK Falling Edge Hold Time. 5
Bus Relinquish Time after Rising Edge of RFS t19 50 ns Bus Relinquish Time after Rising Edge of RFS. 5
Bus Relinquish Time after Rising Edge of SCLK (external clocking) t19A 90 ns Bus Relinquish Time after Rising Edge of SCLK. 5
VDD Nominal Supply VDD 5 V ± 5% for specified performance 4
Thermal Impedance, θJA (SOIC_W) θJA 75 °C/W SOIC_W package 6

CAD (KiCad official)

  • Symbol: AD7890ARZ-10
  • Footprint: Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm
  • 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
  • 3D model files: ad7890arz-10-etched.step / ad7890arz-10-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7890arz-10.step / ad7890arz-10.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 a215b4a17417915e, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF