3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLC5916ID
Texas Instruments · LED Drivers · SOIC-16
TLC5916ID from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground for control logic and current sink. |
| 2 | SDI | input | Serial-data input to the shift register; VIH is 0.7 × VDD minimum and VIL is 0.3 × VDD maximum. |
| 3 | CLK | input | Clock input for data shift on the rising edge, with Schmitt-trigger input and 30 MHz maximum clock frequency in cascade operation. |
| 4 | LE(ED1) | input | Data strobe: serial data is latched to the output latch while LE is high and held when it goes low; it also serves as the control input for Error Detection and Current Adjust modes, and has an internal 500 kΩ pulldown. |
| 5 | OUT0 | output | Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V. |
| 6 | OUT1 | output | Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V. |
| 7 | OUT2 | output | Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V. |
| 8 | OUT3 | output | Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V. |
| 9 | OUT4 | output | Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V. |
| 10 | OUT5 | output | Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V. |
| 11 | OUT6 | output | Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V. |
| 12 | OUT7 | output | Constant-current sink output, adjustable from 3 mA to 120 mA per channel via R-EXT, with a maximum output voltage of 20 V. |
| 13 | OE(ED2) | input | Output enable: when low the output drivers are enabled and when high all outputs are turned off (blanked); it also serves as the control input for Error Detection and Current Adjust modes, and has an internal 500 kΩ pullup. |
| 14 | SDO | output | Serial-data output to the SDI of the next driver IC or to the microcontroller; VOH is at least VDD − 0.4 V at IOL = −1 mA and VOL is at most 0.4 V at IOH = 1 mA. |
| 15 | R-EXT | input | External resistor connection to ground that sets the output current for all channels. |
| 16 | VDD | power_in | Supply voltage, 3 V minimum to 5.5 V maximum (absolute maximum 7 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | LED Drivers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Supply voltage | VDD | 0 | 7 | V | 4 | ||
| Input voltage | VI | -0.4 | V | 4 | |||
| Output voltage | VO | -0.5 | 20 | V | 4 | ||
| Clock frequency | fclk | 25 | MHz | 4 | |||
| Output current | IOUT | 120 | mA | 4 | |||
| GND terminal current | IGND | 960 | mA | 4 | |||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Supply voltage | VDD | 3 | 5.5 | V | 4 | ||
| Supply voltage to output pins OUT0-OUT7 | VO | 20 | V | 4 | |||
| Output current | IO | 3 | mA | VO ≥ 0.6 V; DC test circuit | 4 | ||
| Output current | IO | 120 | mA | VO ≥ 1 V; DC test circuit | 4 | ||
| High-level output current, source | IOH | -1 | mA | SDO shorted to GND | 4 | ||
| Low-level output current, sink | IOL | 1 | mA | SDO shorted to VCC | 4 | ||
| Input voltage (VDD = 3 V table) | VDD | 3 | 5.5 | V | VDD = 3 V, TJ = -40°C to 125°C | 5 | |
| Supply voltage to the output pins (VDD = 3 V table) | VO | 20 | V | VDD = 3 V, TJ = -40°C to 125°C | 5 | ||
| Output current (VDD = 3 V table) | IO | 3 | mA | VDD = 3 V, TJ = -40°C to 125°C; VO ≥ 0.6 V | 5 | ||
| Output current (VDD = 3 V table) | IO | 120 | mA | VDD = 3 V, TJ = -40°C to 125°C; VO ≥ 1 V | 5 | ||
| High-level output current, source (VDD = 3 V table) | IOH | -1 | mA | VDD = 3 V, TJ = -40°C to 125°C | 5 | ||
| Low-level output current, sink (VDD = 3 V table) | IOL | 1 | mA | VDD = 3 V, TJ = -40°C to 125°C | 5 | ||
| Low-level output voltage, SDO (VDD = 3 V table) | VOL | 0.4 | V | VDD = 3 V, TJ = -40°C to 125°C; SDO, IOH = 1 mA | 5 | ||
| Output leakage current, TJ = 25°C (VDD = 3 V table) | Ileak | 0.5 | μA | VDD = 3 V, TJ = -40°C to 125°C; VOH = 17 V, TJ = 25°C | 5 | ||
| Output leakage current, TJ = 125°C (VDD = 3 V table) | Ileak | 2 | μA | VDD = 3 V, TJ = -40°C to 125°C; VOH = 17 V, TJ = 125°C | 5 | ||
| Output current error, die-die (VDD = 3 V table) | IO(1) | -6 | 3 | 6 | % | VDD = 3 V, TJ = -40°C to 125°C; IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C | 5 |
| Output current skew, channel-to-channel (VDD = 3 V table) | -3 | 1.5 | 3 | % | VDD = 3 V, TJ = -40°C to 125°C; IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C | 5 | |
| Output current error, die-die (VDD = 3 V table) | IO(2) | -6 | 2 | 6 | % | VDD = 3 V, TJ = -40°C to 125°C; IOL = 52 mA, VO = 0.8 V, Rext = 360 Ω, TJ = 25°C | 5 |
| IOUT vs output voltage regulation (VDD = 3 V table) | IOUT | -0.1 | 0.1 | %/V | VDD = 3 V, TJ = -40°C to 125°C; VO = 1 V to 3 V, IO = 26 mA | 5 | |
| IOUT vs supply voltage regulation (VDD = 3 V table) | IOUT | -1 | 1 | %/V | VDD = 3 V, TJ = -40°C to 125°C; VDD = 3.0 V to 5.5 V, IO = 26 mA/120 mA | 5 | |
| Overtemperature shutdown (VDD = 3 V table) | Tsd | 150 | 175 | 200 | °C | VDD = 3 V, TJ = -40°C to 125°C | 5 |
| Supply current, Rext = Open (VDD = 3 V table) | IDD | 5 | 10 | mA | VDD = 3 V, TJ = -40°C to 125°C; Rext = Open | 5 | |
| Supply current, Rext = 720 Ω (VDD = 3 V table) | IDD | 8 | 14 | mA | VDD = 3 V, TJ = -40°C to 125°C; Rext = 720 Ω | 5 | |
| Supply current, Rext = 360 Ω (VDD = 3 V table) | IDD | 11 | 18 | mA | VDD = 3 V, TJ = -40°C to 125°C; Rext = 360 Ω | 5 | |
| Supply current, Rext = 180 Ω (VDD = 3 V table) | IDD | 16 | 22 | mA | VDD = 3 V, TJ = -40°C to 125°C; Rext = 180 Ω | 5 | |
| Input voltage (VDD = 5.5 V table) | VDD | 3 | 5.5 | V | VDD = 5.5 V, TJ = -40°C to 125°C | 6 | |
| Supply voltage to the output pins (VDD = 5.5 V table) | VO | 20 | V | VDD = 5.5 V, TJ = -40°C to 125°C | 6 | ||
| Output current (VDD = 5.5 V table) | IO | 3 | mA | VDD = 5.5 V, TJ = -40°C to 125°C; VO ≥ 0.6 V | 6 | ||
| Output current (VDD = 5.5 V table) | IO | 120 | mA | VDD = 5.5 V, TJ = -40°C to 125°C; VO ≥ 1 V | 6 | ||
| High-level output current, source (VDD = 5.5 V table) | IOH | -1 | mA | VDD = 5.5 V, TJ = -40°C to 125°C | 6 | ||
| Low-level output current, sink (VDD = 5.5 V table) | IOL | 1 | mA | VDD = 5.5 V, TJ = -40°C to 125°C | 6 | ||
| Low-level output voltage, SDO (VDD = 5.5 V table) | VOL | 0.4 | V | VDD = 5.5 V, TJ = -40°C to 125°C; SDO, IOH = 1 mA | 6 | ||
| Output leakage current, TJ = 25°C (VDD = 5.5 V table) | Ileak | 0.5 | μA | VDD = 5.5 V, TJ = -40°C to 125°C; VOH = 17 V, TJ = 25°C | 6 | ||
| Output leakage current, TJ = 125°C (VDD = 5.5 V table) | Ileak | 2 | μA | VDD = 5.5 V, TJ = -40°C to 125°C; VOH = 17 V, TJ = 125°C | 6 | ||
| Output current error, die-die (VDD = 5.5 V table) | IO(1) | -6 | 3 | 6 | % | VDD = 5.5 V, TJ = -40°C to 125°C; IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C | 6 |
| Output current skew, channel-to-channel (VDD = 5.5 V table) | -3 | 1.5 | 3 | % | VDD = 5.5 V, TJ = -40°C to 125°C; IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C | 6 | |
| Output current error, die-die (VDD = 5.5 V table) | IO(2) | -6 | 2 | 6 | % | VDD = 5.5 V, TJ = -40°C to 125°C; IOL = 52 mA, VO = 0.8 V, Rext = 360 Ω, TJ = 25°C | 6 |
| IOUT vs output voltage regulation (VDD = 5.5 V table) | IOUT | -0.1 | 0.1 | %/V | VDD = 5.5 V, TJ = -40°C to 125°C; VO = 1 V to 3 V, IO = 26 mA | 6 | |
| IOUT vs supply voltage regulation (VDD = 5.5 V table) | IOUT | -1 | 1 | %/V | VDD = 5.5 V, TJ = -40°C to 125°C; VDD = 3.0 V to 5.5 V, IO = 26 mA/120 mA | 6 | |
| Overtemperature shutdown (VDD = 5.5 V table) | Tsd | 150 | 175 | 200 | °C | VDD = 5.5 V, TJ = -40°C to 125°C | 6 |
| Supply current, Rext = Open (VDD = 5.5 V table) | IDD | 6 | 10 | mA | VDD = 5.5 V, TJ = -40°C to 125°C; Rext = Open | 6 | |
| Supply current, Rext = 720 Ω (VDD = 5.5 V table) | IDD | 11 | 14 | mA | VDD = 5.5 V, TJ = -40°C to 125°C; Rext = 720 Ω | 6 | |
| Supply current, Rext = 360 Ω (VDD = 5.5 V table) | IDD | 13 | 18 | mA | VDD = 5.5 V, TJ = -40°C to 125°C; Rext = 360 Ω | 6 | |
| Supply current, Rext = 180 Ω (VDD = 5.5 V table) | IDD | 19 | 24 | mA | VDD = 5.5 V, TJ = -40°C to 125°C; Rext = 180 Ω | 6 | |
| Junction-to-ambient thermal resistance (D package) | RθJA | 87.4 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (D package) | RθJC(top) | 48.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance (D package) | RθJB | 44.4 | °C/W | 4 | |||
| Junction-to-top characterization parameter (D package) | ψJT | 12.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter (D package) | ψJB | 44.2 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TLC5916ID - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
tlc5916id-etched.step/tlc5916id-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc5916id.step/tlc5916id.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
f257e916f7b5d37b, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).