Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ESP32-WROOM-32E

Espressif Systems · RF and Wireless · 38-SMD Module

ESP32-WROOM-32E from Espressif Systems, in a 38-SMD Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.

Pinout

Pin Name Type Function
1 GND power_in Ground.
2 3V3 power_in Power supply, recommended 3.0 to 3.6 V (3.3 V typical) with at least 0.5 A delivered by the external supply.
3 EN input Chip enable: high turns the chip on, low shuts it down; do not leave the pin floating.
4 SENSOR_VP input GPIO36, ADC1_CH0, RTC_GPIO0 (input only).
5 SENSOR_VN input GPIO39, ADC1_CH3, RTC_GPIO3 (input only).
6 IO34 input GPIO34, ADC1_CH6, RTC_GPIO4 (input only).
7 IO35 input GPIO35, ADC1_CH7, RTC_GPIO5 (input only).
8 IO32 bidirectional GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9.
9 IO33 bidirectional GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8.
10 IO25 bidirectional GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0.
11 IO26 bidirectional GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1.
12 IO27 bidirectional GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV.
13 IO14 bidirectional GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2.
14 IO12 bidirectional GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI (strapping pin selecting VDD_SDIO voltage, default pull-down), HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3; should be kept low at power-on.
15 GND power_in Ground.
16 IO13 bidirectional GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER.
17 NC unconnected Not connected; GPIO6 to GPIO11 are tied to the on-module SPI flash and not led out.
18 NC unconnected Not connected; GPIO6 to GPIO11 are tied to the on-module SPI flash and not led out.
19 NC unconnected Not connected; GPIO6 to GPIO11 are tied to the on-module SPI flash and not led out.
20 NC unconnected Not connected; GPIO6 to GPIO11 are tied to the on-module SPI flash and not led out.
21 NC unconnected Not connected; GPIO6 to GPIO11 are tied to the on-module SPI flash and not led out.
22 NC unconnected Not connected; GPIO6 to GPIO11 are tied to the on-module SPI flash and not led out.
23 IO15 bidirectional GPIO15, ADC2_CH3, TOUCH3, MTDO (strapping pin controlling U0TXD printing, default pull-up), HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3.
24 IO2 bidirectional GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0; strapping pin for boot mode (default pull-down).
25 IO0 bidirectional GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK; strapping pin for boot mode (default pull-up, low with GPIO2 low selects Joint Download Boot).
26 IO4 bidirectional GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER.
27 IO16 bidirectional GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT; connected to the embedded PSRAM and unusable on R2 variants.
28 IO17 bidirectional GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180.
29 IO5 bidirectional GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK; strapping pin for SDIO slave timing (default pull-up).
30 IO18 bidirectional GPIO18, VSPICLK, HS1_DATA7.
31 IO19 bidirectional GPIO19, VSPIQ, U0CTS, EMAC_TXD0.
32 NC unconnected Not connected.
33 IO21 bidirectional GPIO21, VSPIHD, EMAC_TX_EN.
34 RXD0 bidirectional GPIO3, U0RXD, CLK_OUT2.
35 TXD0 bidirectional GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2.
36 IO22 bidirectional GPIO22, VSPIWP, U0RTS, EMAC_TXD1.
37 IO23 bidirectional GPIO23, VSPID, HS1_STROBE.
38 GND power_in Ground.
39 GND power_in Exposed ground pad (EPAD); soldering it to the base-board ground is optional but can optimize thermal performance.

Key specifications

Parameter Value
Manufacturer Espressif Systems
Package 38-SMD Module
Category RF and Wireless
Pins 39

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VDD33 -0.3 3.6 V 28
Storage temperature TSTORE -40 105 °C 28
Power supply voltage VDD33 3 3.3 3.6 V 28
Current delivered by external power supply IVDD 0.5 A 28
Operating ambient temperature T -40 85 °C 85 °C version 28
Operating ambient temperature T 105 °C 105 °C version 28
Low-level input voltage VIL -0.3 V 28
High-level input current IIH 50 nA 28
Low-level input current IIL 50 nA 28
Low-level input voltage of CHIP_PU to shut down the chip VIL_nRST 0.6 V 29
DNL (Differential nonlinearity) -7 7 LSB RTC controller; ADC connected to an external 100 nF capacitor; DC signal input; ambient temperature at 25 °C; Wi-Fi&Bluetooth off 25
INL (Integral nonlinearity) -12 12 LSB RTC controller; ADC connected to an external 100 nF capacitor; DC signal input; ambient temperature at 25 °C; Wi-Fi&Bluetooth off 25
Total error -23 23 mV Atten = 0, effective measurement range of 100 ∼ 950 mV 26
Total error -30 30 mV Atten = 1, effective measurement range of 100 ∼ 1250 mV 26
Total error -40 40 mV Atten = 2, effective measurement range of 150 ∼ 1750 mV 26
Total error -60 60 mV Atten = 3, effective measurement range of 150 ∼ 2450 mV 26

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Solder, Sn-Ag-Cu (SAC305) lead-free solder alloy Figure 15: Reflow Profile 46

CAD (land: Espressif; 3D: Espressif Systems)

  • Symbol: ESP32-WROOM-32E
  • Footprint: PCM_Espressif:ESP32-WROOM-32E
  • 3D model: 38-SMD Module (Espressif KiCad libraries, STEP)
  • 3D model files: esp32-wroom-32e-m113eh3200ph3q0-etched.step / esp32-wroom-32e-m113eh3200ph3q0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); esp32-wroom-32e-m113eh3200ph3q0.step / esp32-wroom-32e-m113eh3200ph3q0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Espressif Systems datasheet (52 pp, sha256 4c7a345d1c1bfec3, retrieved 2026-11-18)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.

Datasheet PDF